Introduce initial support for the Qualcomm SC8280XP platform, aka 8cx
Gen 3. This initial contribution supports SMP, CPUfreq, CPU cluster
idling, GCC, TLMM, SMMU, RPMh regulators, power-domains and clocks,
interconnects, some QUPs, UFS, remoteprocs, USB, watchdog, LLCC and
tsens.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
Changes since v1:
- Reordered "status" last
- Fixed invalid unit addresses on USB phys
- Dropped multiport USB controller for now
- Fixed system-cache-controller sort ordering
- Moved &xo_board_clk frequency to board dts
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2145 ++++++++++++++++++++++++
1 file changed, 2145 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
new file mode 100644
index 000000000000..ac13965a181e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -0,0 +1,2145 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,sc8280xp.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ xo_board_clk: xo-board-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32764>;
+ };
+ };
+
+ cpu0_opp_table: cpu0-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-403200000 {
+ opp-hz = /bits/ 64 <403200000>;
+ };
+ opp-499200000 {
+ opp-hz = /bits/ 64 <499200000>;
+ };
+ opp-595200000 {
+ opp-hz = /bits/ 64 <595200000>;
+ };
+ opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ };
+ opp-806400000 {
+ opp-hz = /bits/ 64 <806400000>;
+ };
+ opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ };
+ opp-1017600000 {
+ opp-hz = /bits/ 64 <1017600000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ };
+ opp-1209600000 {
+ opp-hz = /bits/ 64 <1209600000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 <1440000000>;
+ };
+ opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ };
+ opp-1670400000 {
+ opp-hz = /bits/ 64 <1670400000>;
+ };
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ };
+ opp-1881600000 {
+ opp-hz = /bits/ 64 <1881600000>;
+ };
+ opp-1996800000 {
+ opp-hz = /bits/ 64 <1996800000>;
+ };
+ opp-2112000000 {
+ opp-hz = /bits/ 64 <2112000000>;
+ };
+ opp-2227200000 {
+ opp-hz = /bits/ 64 <2227200000>;
+ };
+ opp-2342400000 {
+ opp-hz = /bits/ 64 <2342400000>;
+ };
+ opp-2438400000 {
+ opp-hz = /bits/ 64 <2438400000>;
+ };
+ };
+
+ cpu4_opp_table: cpu4-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-825600000 {
+ opp-hz = /bits/ 64 <825600000>;
+ };
+ opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ };
+ opp-1171200000 {
+ opp-hz = /bits/ 64 <1171200000>;
+ };
+ opp-1286400000 {
+ opp-hz = /bits/ 64 <1286400000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ };
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ };
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ };
+ opp-1747200000 {
+ opp-hz = /bits/ 64 <1747200000>;
+ };
+ opp-1862400000 {
+ opp-hz = /bits/ 64 <1862400000>;
+ };
+ opp-1977600000 {
+ opp-hz = /bits/ 64 <1977600000>;
+ };
+ opp-2073600000 {
+ opp-hz = /bits/ 64 <2073600000>;
+ };
+ opp-2169600000 {
+ opp-hz = /bits/ 64 <2169600000>;
+ };
+ opp-2284800000 {
+ opp-hz = /bits/ 64 <2284800000>;
+ };
+ opp-2400000000 {
+ opp-hz = /bits/ 64 <2400000000>;
+ };
+ opp-2496000000 {
+ opp-hz = /bits/ 64 <2496000000>;
+ };
+ opp-2592000000 {
+ opp-hz = /bits/ 64 <2592000000>;
+ };
+ opp-2688000000 {
+ opp-hz = /bits/ 64 <2688000000>;
+ };
+ opp-2803200000 {
+ opp-hz = /bits/ 64 <2803200000>;
+ };
+ opp-2899200000 {
+ opp-hz = /bits/ 64 <2899200000>;
+ };
+ opp-2995200000 {
+ opp-hz = /bits/ 64 <2995200000>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <602>;
+ next-level-cache = <&L2_0>;
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <602>;
+ next-level-cache = <&L2_100>;
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <602>;
+ next-level-cache = <&L2_200>;
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <602>;
+ next-level-cache = <&L2_300>;
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_400>;
+ power-domains = <&CPU_PD4>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ #cooling-cells = <2>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_500>;
+ power-domains = <&CPU_PD5>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ #cooling-cells = <2>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_600>;
+ power-domains = <&CPU_PD6>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ #cooling-cells = <2>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_700>;
+ power-domains = <&CPU_PD7>;
+ power-domain-names = "psci";
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ #cooling-cells = <2>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+
+ core4 {
+ cpu = <&CPU4>;
+ };
+
+ core5 {
+ cpu = <&CPU5>;
+ };
+
+ core6 {
+ cpu = <&CPU6>;
+ };
+
+ core7 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <355>;
+ exit-latency-us = <909>;
+ min-residency-us = <3934>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-rail-power-collapse";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <241>;
+ exit-latency-us = <1461>;
+ min-residency-us = <4488>;
+ local-timer-stop;
+ };
+ };
+
+ domain-idle-states {
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "domain-idle-state";
+ idle-state-name = "cluster-power-collapse";
+ arm,psci-suspend-param = <0x4100c344>;
+ entry-latency-us = <3263>;
+ exit-latency-us = <6562>;
+ min-residency-us = <9987>;
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-sc8280xp", "qcom,scm";
+ };
+ };
+
+ aggre1_noc: interconnect-aggre1-noc {
+ compatible = "qcom,sc8280xp-aggre1-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect-aggre2-noc {
+ compatible = "qcom,sc8280xp-aggre2-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ clk_virt: interconnect-clk-virt {
+ compatible = "qcom,sc8280xp-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ config_noc: interconnect-config-noc {
+ compatible = "qcom,sc8280xp-config-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ dc_noc: interconnect-dc-noc {
+ compatible = "qcom,sc8280xp-dc-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gem_noc: interconnect-gem-noc {
+ compatible = "qcom,sc8280xp-gem-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ lpass_noc: interconnect-lpass-ag-noc {
+ compatible = "qcom,sc8280xp-lpass-ag-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect-mc-virt {
+ compatible = "qcom,sc8280xp-mc-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc: interconnect-mmss-noc {
+ compatible = "qcom,sc8280xp-mmss-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ nspa_noc: interconnect-nspa-noc {
+ compatible = "qcom,sc8280xp-nspa-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ nspb_noc: interconnect-nspb-noc {
+ compatible = "qcom,sc8280xp-nspb-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect-system-noc {
+ compatible = "qcom,sc8280xp-system-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x80000000 0x0 0x0>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+
+ CPU_PD0: cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD1: cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD2: cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD3: cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ };
+
+ CPU_PD4: cpu4 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD5: cpu5 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD6: cpu6 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CPU_PD7: cpu7 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ };
+
+ CLUSTER_PD: cpu-cluster0 {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_SLEEP_0>;
+ };
+ };
+
+ qup_opp_table_100mhz: qup-100mhz-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ memory@80000000 {
+ reg = <0 0x80000000 0 0x860000>;
+ no-map;
+ };
+
+ cmd_db: memory@80860000 {
+ compatible = "qcom,cmd-db";
+ reg = <0 0x80860000 0 0x20000>;
+ no-map;
+ };
+
+ memory@80880000 {
+ reg = <0 0x80880000 0 0x80000>;
+ no-map;
+ };
+
+ smem_mem: smem@80900000 {
+ compatible = "qcom,smem";
+ reg = <0 0x80900000 0 0x200000>;
+ no-map;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ memory@80b00000 {
+ reg = <0 0x80b00000 0 0x100000>;
+ no-map;
+ };
+
+ memory@83b00000 {
+ reg = <0 0x83b00000 0 0x1700000>;
+ no-map;
+ };
+
+ memory@85b00000 {
+ reg = <0 0x85b00000 0 0xc00000>;
+ no-map;
+ };
+
+ pil_adsp_mem: memory@86c00000 {
+ reg = <0 0x86c00000 0 0x2000000>;
+ no-map;
+ };
+
+ pil_nsp0_mem: memory@8a100000 {
+ reg = <0 0x8a100000 0 0x1e00000>;
+ no-map;
+ };
+
+ pil_nsp1_mem: memory@8c600000 {
+ reg = <0 0x8c600000 0 0x1e00000>;
+ no-map;
+ };
+
+ memory@aeb00000 {
+ reg = <0 0xaeb00000 0 0x16600000>;
+ no-map;
+ };
+ };
+
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-nsp0 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_nsp0_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_nsp0_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-nsp1 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <12>;
+
+ smp2p_nsp1_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_nsp1_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ soc: soc@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x10 0>;
+ dma-ranges = <0 0 0 0 0x10 0>;
+ compatible = "simple-bus";
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sc8280xp";
+ reg = <0x0 0x00100000 0x0 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&usb_0_ssphy>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&usb_1_ssphy>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ };
+
+ ipcc: mailbox@408000 {
+ compatible = "qcom,sc8280xp-ipcc", "qcom,ipcc";
+ reg = <0 0x00408000 0 0x1000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #mbox-cells = <2>;
+ };
+
+ qup2: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x008c0000 0 0x2000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ iommus = <&apps_smmu 0xa3 0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ qup2_uart17: serial@884000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00884000 0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core", "qup-config";
+ status = "disabled";
+ };
+
+ qup2_i2c5: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+ };
+
+ qup0: geniqup@9c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x009c0000 0 0x6000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ iommus = <&apps_smmu 0x563 0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ qup0_i2c4: i2c@990000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00990000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&rpmhpd SC8280XP_CX>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ status = "disabled";
+ };
+ };
+
+ qup1: geniqup@ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x00ac0000 0 0x6000>;
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ clock-names = "m-ahb", "s-ahb";
+ iommus = <&apps_smmu 0x83 0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+ };
+
+ ufs_mem_hc: ufs@1d84000 {
+ compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0 0x01d84000 0 0x3000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ iommus = <&apps_smmu 0xe0 0x0>;
+
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ freq-table-hz = <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+ status = "disabled";
+ };
+
+ ufs_mem_phy: phy@1d87000 {
+ compatible = "qcom,sc8280xp-qmp-ufs-phy";
+ reg = <0 0x01d87000 0 0xe10>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-names = "ref",
+ "ref_aux";
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+ status = "disabled";
+
+ ufs_mem_phy_lanes: phy@1d87400 {
+ reg = <0 0x01d87400 0 0x108>,
+ <0 0x01d87600 0 0x1e0>,
+ <0 0x01d87c00 0 0x1dc>,
+ <0 0x01d87800 0 0x108>,
+ <0 0x01d87a00 0 0x1e0>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ };
+ };
+
+ ufs_card_hc: ufs@1da4000 {
+ compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0 0x01da4000 0 0x3000>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_card_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_CARD_BCR>;
+ reset-names = "rst";
+
+ power-domains = <&gcc UFS_CARD_GDSC>;
+
+ iommus = <&apps_smmu 0x4a0 0x0>;
+
+ clocks = <&gcc GCC_UFS_CARD_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
+ <&gcc GCC_UFS_CARD_AHB_CLK>,
+ <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ freq-table-hz = <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+ status = "disabled";
+ };
+
+ ufs_card_phy: phy@1da7000 {
+ compatible = "qcom,sc8280xp-qmp-ufs-phy";
+ reg = <0 0x01da7000 0 0xe10>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-names = "ref",
+ "ref_aux";
+ clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
+ <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
+
+ resets = <&ufs_card_hc 0>;
+ reset-names = "ufsphy";
+
+ status = "disabled";
+
+ ufs_card_phy_lanes: phy@1da7400 {
+ reg = <0 0x01da7400 0 0x108>,
+ <0 0x01da7600 0 0x1e0>,
+ <0 0x01da7c00 0 0x1dc>,
+ <0 0x01da7800 0 0x108>,
+ <0 0x01da7a00 0 0x1e0>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ };
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x0 0x01f40000 0x0 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ usb_0_hsphy: phy@88e5000 {
+ compatible = "qcom,sc8280xp-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e5000 0 0x400>;
+ clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2_hsphy0: phy@88e7000 {
+ compatible = "qcom,sc8280xp-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e7000 0 0x400>;
+ clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2_hsphy1: phy@88e8000 {
+ compatible = "qcom,sc8280xp-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e8000 0 0x400>;
+ clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2_hsphy2: phy@88e9000 {
+ compatible = "qcom,sc8280xp-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e9000 0 0x400>;
+ clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2_hsphy3: phy@88ea000 {
+ compatible = "qcom,sc8280xp-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088ea000 0 0x400>;
+ clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2_qmpphy0: phy-wrapper@88ef000 {
+ compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+ reg = <0 0x088ef000 0 0x1c8>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_MP0_CLKREF_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+ reset-names = "phy", "common";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ status = "disabled";
+
+ usb_2_ssphy0: phy@88efe00 {
+ reg = <0 0x088efe00 0 0x160>,
+ <0 0x088f0000 0 0x1ec>,
+ <0 0x088ef200 0 0x1f0>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb2_phy0_pipe_clk";
+ };
+ };
+
+ usb_2_qmpphy1: phy-wrapper@88f1000 {
+ compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+ reg = <0 0x088f1000 0 0x1c8>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_MP1_CLKREF_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+ reset-names = "phy", "common";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+
+ status = "disabled";
+
+ usb_2_ssphy1: phy@88f1e00 {
+ reg = <0 0x088f1e00 0 0x160>,
+ <0 0x088f2000 0 0x1ec>,
+ <0 0x088f1200 0 0x1f0>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb2_phy1_pipe_clk";
+ };
+ };
+
+ remoteproc_adsp: remoteproc@3000000 {
+ compatible = "qcom,sc8280xp-adsp-pas";
+ reg = <0 0x03000000 0 0x100>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack", "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SC8280XP_LCX>,
+ <&rpmhpd SC8280XP_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ remoteproc_adsp_glink: glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ };
+ };
+
+ usb_0_qmpphy: phy-wrapper@88ec000 {
+ compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+ reg = <0 0x088ec000 0 0x1e4>,
+ <0 0x088eb000 0 0x40>,
+ <0 0x088ed000 0 0x1c8>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB4_EUD_CLKREF_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+ reset-names = "phy", "common";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ status = "disabled";
+
+ usb_0_ssphy: usb3-phy@88eb400 {
+ reg = <0 0x088eb400 0 0x100>,
+ <0 0x088eb600 0 0x3ec>,
+ <0 0x088ec400 0 0x1f0>,
+ <0 0x088eba00 0 0x100>,
+ <0 0x088ebc00 0 0x3ec>,
+ <0 0x088ec700 0 0x64>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb0_phy_pipe_clk_src";
+ };
+
+ usb_0_dpphy: dp-phy@88ed200 {
+ reg = <0 0x088ed200 0 0x200>,
+ <0 0x088ed400 0 0x200>,
+ <0 0x088eda00 0 0x200>,
+ <0 0x088ea600 0 0x200>,
+ <0 0x088ea800 0 0x200>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ usb_1_hsphy: phy@8902000 {
+ compatible = "qcom,sc8280xp-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x08902000 0 0x400>;
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_qmpphy: phy-wrapper@8904000 {
+ compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+ reg = <0 0x08904000 0 0x1e4>,
+ <0 0x08903000 0 0x40>,
+ <0 0x08905000 0 0x1c8>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB4_CLKREF_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>;
+ reset-names = "phy", "common";
+
+ power-domains = <&gcc USB30_SEC_GDSC>;
+
+ status = "disabled";
+
+ usb_1_ssphy: usb3-phy@8903400 {
+ reg = <0 0x08903400 0 0x100>,
+ <0 0x08903c00 0 0x3ec>,
+ <0 0x08904400 0 0x1f0>,
+ <0 0x08903a00 0 0x100>,
+ <0 0x08903c00 0 0x3ec>,
+ <0 0x08904200 0 0x18>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb1_phy_pipe_clk_src";
+ };
+
+ usb_1_dpphy: dp-phy@88ed200 {
+ reg = <0 0x08904200 0 0x200>,
+ <0 0x08904400 0 0x200>,
+ <0 0x08904a00 0 0x200>,
+ <0 0x08904600 0 0x200>,
+ <0 0x08904800 0 0x200>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ system-cache-controller@9200000 {
+ compatible = "qcom,sc8280xp-llcc";
+ reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
+ reg-names = "llcc_base", "llcc_broadcast_base";
+ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usb_0: usb@a6f8800 {
+ compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "core", "iface", "bus_aggr", "utmi", "sleep",
+ "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+ "dm_hs_phy_irq", "ss_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ status = "disabled";
+
+ usb_0_dwc3: usb@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xcd00>;
+ interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x820 0x0>;
+ phys = <&usb_0_hsphy>, <&usb_0_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usb_1: usb@a8f8800 {
+ compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
+ reg = <0 0x0a8f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_SEC_MASTER_CLK>,
+ <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "core", "iface", "bus_aggr", "utmi", "sleep",
+ "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+ "dm_hs_phy_irq", "ss_phy_irq";
+
+ power-domains = <&gcc USB30_SEC_GDSC>;
+
+ resets = <&gcc GCC_USB30_SEC_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ status = "disabled";
+
+ usb_1_dwc3: usb@a800000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a800000 0 0xcd00>;
+ interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x860 0x0>;
+ phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sc8280xp-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+ qcom,pdc-ranges = <0 480 40>,
+ <40 140 14>,
+ <54 263 1>,
+ <55 306 4>,
+ <59 312 3>,
+ <62 374 2>,
+ <64 434 2>,
+ <66 438 3>,
+ <69 86 1>,
+ <70 520 54>,
+ <124 609 28>,
+ <159 638 1>,
+ <160 720 8>,
+ <168 801 1>,
+ <169 728 30>,
+ <199 416 2>,
+ <201 449 1>,
+ <202 89 1>,
+ <203 451 1>,
+ <204 462 1>,
+ <205 264 1>,
+ <206 579 1>,
+ <207 653 1>,
+ <208 656 1>,
+ <209 659 1>,
+ <210 122 1>,
+ <211 699 1>,
+ <212 705 1>,
+ <213 450 1>,
+ <214 643 1>,
+ <216 646 5>,
+ <221 390 5>,
+ <226 700 3>,
+ <229 240 3>,
+ <232 269 1>,
+ <233 377 1>,
+ <234 372 1>,
+ <235 138 1>,
+ <236 857 1>,
+ <237 860 1>,
+ <238 137 1>,
+ <239 668 1>,
+ <240 366 1>,
+ <241 949 1>,
+ <242 815 5>,
+ <247 769 1>,
+ <248 768 1>,
+ <249 663 1>,
+ <250 799 2>,
+ <252 798 1>,
+ <253 765 1>,
+ <254 763 1>,
+ <255 454 1>,
+ <258 139 1>,
+ <259 786 2>,
+ <261 370 2>,
+ <263 158 2>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1ff>, /* TM */
+ <0 0x0c222000 0 0x8>; /* SROT */
+ #qcom,sensors = <14>;
+ interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c265000 0 0x1ff>, /* TM */
+ <0 0x0c223000 0 0x8>; /* SROT */
+ #qcom,sensors = <16>;
+ interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ aoss_qmp: power-controller@c300000 {
+ compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp";
+ reg = <0 0x0c300000 0 0x400>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ #clock-cells = <0>;
+ };
+
+ spmi_bus: spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0 0x0c440000 0 0x1100>,
+ <0 0x0c600000 0 0x2000000>,
+ <0 0x0e600000 0 0x100000>,
+ <0 0x0e700000 0 0xa0000>,
+ <0 0x0c40a000 0 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sc8280xp-tlmm";
+ reg = <0 0x0f100000 0 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 230>;
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500";
+ reg = <0 0x15000000 0 0x100000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <2>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 890 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
+ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0 0x20000>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic-its@17a40000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0 0x17a40000 0 0x20000>;
+ msi-controller;
+ #msi-cells = <1>;
+ };
+ };
+
+ watchdog@17c10000 {
+ compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt";
+ reg = <0 0x17c10000 0 0x1000>;
+ clocks = <&sleep_clk>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@17c20000 {
+ compatible = "arm,armv7-timer-mem";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ reg = <0x0 0x17c20000 0x0 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@17c21000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c21000 0x0 0x1000>,
+ <0x0 0x17c22000 0x0 0x1000>;
+ };
+
+ frame@17c23000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c23000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c25000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c25000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c27000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c26000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c29000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c29000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2b000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c2b000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2d000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c2d000 0x0 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@18200000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x0 0x18200000 0x0 0x10000>,
+ <0x0 0x18210000 0x0 0x10000>,
+ <0x0 0x18220000 0x0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
+ <WAKE_TCS 3>, <CONTROL_TCS 1>;
+ label = "apps_rsc";
+
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sc8280xp-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board_clk>;
+ };
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sc8280xp-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+ };
+
+ cpufreq_hw: cpufreq@18591000 {
+ compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss";
+ reg = <0 0x18591000 0 0x1000>,
+ <0 0x18592000 0 0x1000>;
+ reg-names = "freq-domain0", "freq-domain1";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+
+ #freq-domain-cells = <1>;
+ };
+
+ remoteproc_nsp0: remoteproc@1b300000 {
+ compatible = "qcom,sc8280xp-nsp0-pas";
+ reg = <0 0x1b300000 0 0x100>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_nsp0_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SC8280XP_NSP>;
+ power-domain-names = "nsp";
+
+ memory-region = <&pil_nsp0_mem>;
+
+ qcom,smem-states = <&smp2p_nsp0_out 0>;
+ qcom,smem-state-names = "stop";
+
+ interconnects = <&nspa_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "nsp0";
+ qcom,remote-pid = <5>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x3181 0x0420>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x3182 0x0420>;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x3183 0x0420>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x3184 0x0420>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x3185 0x0420>;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x3186 0x0420>;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x3187 0x0420>;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x3188 0x0420>;
+ };
+
+ compute-cb@9 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <9>;
+ iommus = <&apps_smmu 0x318b 0x0420>;
+ };
+
+ compute-cb@10 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <10>;
+ iommus = <&apps_smmu 0x318b 0x0420>;
+ };
+
+ compute-cb@11 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <11>;
+ iommus = <&apps_smmu 0x318c 0x0420>;
+ };
+
+ compute-cb@12 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <12>;
+ iommus = <&apps_smmu 0x318d 0x0420>;
+ };
+
+ compute-cb@13 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <13>;
+ iommus = <&apps_smmu 0x318e 0x0420>;
+ };
+
+ compute-cb@14 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <14>;
+ iommus = <&apps_smmu 0x318f 0x0420>;
+ };
+ };
+ };
+ };
+
+ remoteproc_nsp1: remoteproc@21300000 {
+ compatible = "qcom,sc8280xp-nsp1-pas";
+ reg = <0 0x21300000 0 0x100>;
+
+ interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_nsp1_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SC8280XP_NSP>;
+ power-domain-names = "nsp";
+
+ memory-region = <&pil_nsp1_mem>;
+
+ qcom,smem-states = <&smp2p_nsp1_out 0>;
+ qcom,smem-state-names = "stop";
+
+ interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 &mc_virt SLAVE_EBI1 0>;
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "nsp1";
+ qcom,remote-pid = <12>;
+ };
+ };
+ };
+
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 15>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <19200000>;
+ };
+};
--
2.35.1
