[PATCH 07/49] sound: soc: codecs: wcd9335: Convert irq chip to config regs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Switch the driver to config registers. This will allow the old
type register code in regmap-irq to be removed.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
---
 sound/soc/codecs/wcd9335.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c
index 617a36a89dfe..727d4436142a 100644
--- a/sound/soc/codecs/wcd9335.c
+++ b/sound/soc/codecs/wcd9335.c
@@ -5020,16 +5020,22 @@ static const struct regmap_irq wcd9335_codec_irqs[] = {
 	},
 };
 
+static const unsigned int wcd9335_config_regs[] = {
+	WCD9335_INTR_LEVEL0,
+};
+
 static const struct regmap_irq_chip wcd9335_regmap_irq1_chip = {
 	.name = "wcd9335_pin1_irq",
 	.status_base = WCD9335_INTR_PIN1_STATUS0,
 	.mask_base = WCD9335_INTR_PIN1_MASK0,
 	.ack_base = WCD9335_INTR_PIN1_CLEAR0,
-	.type_base = WCD9335_INTR_LEVEL0,
-	.num_type_reg = 4,
 	.num_regs = 4,
 	.irqs = wcd9335_codec_irqs,
 	.num_irqs = ARRAY_SIZE(wcd9335_codec_irqs),
+	.config_base = wcd9335_config_regs,
+	.num_config_bases = ARRAY_SIZE(wcd9335_config_regs),
+	.num_config_regs = 4,
+	.set_type_config = regmap_irq_set_type_config_simple,
 };
 
 static int wcd9335_parse_dt(struct wcd9335_codec *wcd)
-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux