On 12/06/2022 12:22, Luca Weiss wrote:
From: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>
Add the MDSS, MDP and DSI nodes that are found on msm8953 SoC.
Signed-off-by: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
Changes from v1:
- disable nodes by default, thanks Dmitry!
- enable iommu for mdp
arch/arm64/boot/dts/qcom/msm8953.dtsi | 208 ++++++++++++++++++++++++++
1 file changed, 208 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 961db3e23ee4..c7373c845f41 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -726,6 +726,214 @@ tcsr_phy_clk_scheme_sel: syscon@193f044 {
reg = <0x193f044 0x4>;
};
+ mdss: mdss@1a00000 {
+ compatible = "qcom,mdss";
+
+ reg = <0x1a00000 0x1000>,
+ <0x1ab0000 0x1040>;
+ reg-names = "mdss_phys",
+ "vbif_phys";
+
+ power-domains = <&gcc MDSS_GDSC>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "vsync";
I've sent the patches using "core" clock for the mdss ([1]). Please
consider utilizing it here.
[1]: https://patchwork.freedesktop.org/series/105162/
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ status = "disabled";
+
[skipped the rest]
--
With best wishes
Dmitry
