On Mon, 9 May 2022 12:53:12 +0100
Caleb Connolly <caleb.connolly@xxxxxxxxxx> wrote:
> On 01/05/2022 18:38, Jonathan Cameron wrote:
> > On Fri, 29 Apr 2022 23:09:00 +0100
> > Caleb Connolly <caleb.connolly@xxxxxxxxxx> wrote:
> >
> >> The Round Robin ADC is responsible for reading data about the rate of
> >> charge from the USB or DC input ports, it can also read the battery
> >> ID (resistence), skin temperature and the die temperature of the pmic.
> >> It is found on the PMI8998 and PM660 Qualcomm PMICs.
> >>
> >> Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
> > Hi Caleb,
> Hi Jonathan,
>
> Thanks for spotting this, I completely missed it... Yeah this should be
> IIO_INFO_PROCESSED, the battery ID calculation doesn't fit in the
> raw/offset/scale format.
> >
> > I took another quick read through of this and noticed that the battery channel
> > is providing on IIO_INFO_RAW but there is code for IIO_INFO_PROCESSED.
> >
> > Something gone wrong along the way? If all we need is to change it to
> > BIT(IIO_INFO_PROCESSED) I can do that whilst applying or you can do a v15 if
> > you prefer.
> That would be hugely appreciated, thanks a lot.
> >
Given other reply I just sent suggesting you do a v15 and Lee might
want to just pick up the series, with above fixed.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Either way works as long as there is an immutable branch somewhere.
Thanks,
Jonathan
> > Thanks,
> >
> > Jonathan
> >
> >> ---
> >
> >> diff --git a/drivers/iio/adc/qcom-spmi-rradc.c b/drivers/iio/adc/qcom-spmi-rradc.c
> >> new file mode 100644
> >> index 000000000000..c437546d8a4c
> >> --- /dev/null
> >> +++ b/drivers/iio/adc/qcom-spmi-rradc.c
> >
> >
> > ..
> >
> >> +
> >> +/*
> >> + * These functions explicitly cast int64_t to int.
> >> + * They will never overflow, as the values are small enough.
> >
> > See below. I don't think this gets used...
> >
> >> + */
> >> +static int rradc_post_process_batt_id(struct rradc_chip *chip, u16 adc_code,
> >> + int *result_ohms)
> >> +{
> >> + uint32_t current_value;
> >> + int64_t r_id;
> >> +
> >> + current_value = chip->batt_id_data;
> >> + r_id = ((int64_t)adc_code * RR_ADC_FS_VOLTAGE_MV);
> >> + r_id = div64_s64(r_id, (RR_ADC_CHAN_MSB * current_value));
> >> + *result_ohms = (int)(r_id * MILLI);
> >> +
> >> + return 0;
> >> +}
> >> +
> >
> >
> >> +
> >> +static int rradc_read_raw(struct iio_dev *indio_dev,
> >> + struct iio_chan_spec const *chan_spec, int *val,
> >> + int *val2, long mask)
> >> +{
> >> + struct rradc_chip *chip = iio_priv(indio_dev);
> >> + const struct rradc_channel *chan;
> >> + int ret;
> >> + u16 adc_code;
> >> +
> >> + if (chan_spec->address >= RR_ADC_CHAN_MAX) {
> >> + dev_err(chip->dev, "Invalid channel index:%lu\n",
> >> + chan_spec->address);
> >> + return -EINVAL;
> >> + }
> >> +
> >> + switch (mask) {
> >> + case IIO_CHAN_INFO_SCALE:
> >> + return rradc_read_scale(chip, chan_spec->address, val, val2);
> >> + case IIO_CHAN_INFO_OFFSET:
> >> + return rradc_read_offset(chip, chan_spec->address, val);
> >> + case IIO_CHAN_INFO_RAW:
> >> + ret = rradc_do_conversion(chip, chan_spec->address, &adc_code);
> >> + if (ret < 0)
> >> + return ret;
> >> +
> >> + *val = adc_code;
> >> + return IIO_VAL_INT;
> >> + case IIO_CHAN_INFO_PROCESSED:
> >
> > This doesn't seem to apply to any channels....
> >
> >> + chan = &rradc_chans[chan_spec->address];
> >> + if (!chan->scale_fn)
> >> + return -EINVAL;
> >> + ret = rradc_do_conversion(chip, chan_spec->address, &adc_code);
> >> + if (ret < 0)
> >> + return ret;
> >> +
> >> + *val = chan->scale_fn(chip, adc_code, val);
> >> + return IIO_VAL_INT;
> >> + default:
> >> + return -EINVAL;
> >> + }
> >> +}
> >> +
> >> +static int rradc_read_label(struct iio_dev *indio_dev,
> >> + struct iio_chan_spec const *chan, char *label)
> >> +{
> >> + return snprintf(label, PAGE_SIZE, "%s\n",
> >> + rradc_chans[chan->address].label);
> >> +}
> >> +
> >> +static const struct iio_info rradc_info = {
> >> + .read_raw = rradc_read_raw,
> >> + .read_label = rradc_read_label,
> >> +};
> >> +
> >> +static const struct rradc_channel rradc_chans[RR_ADC_CHAN_MAX] = {
> >> + {
> >> + .label = "batt_id",
> >> + .scale_fn = rradc_post_process_batt_id,
> >> + .lsb = RR_ADC_BATT_ID_5_LSB,
> >> + .status = RR_ADC_BATT_ID_STS,
> >> + .size = 6,
> >> + .trigger_addr = RR_ADC_BATT_ID_TRIGGER,
> >> + .trigger_mask = BIT(0),
> >> + }, {
> >> + .label = "batt",
> >> + .lsb = RR_ADC_BATT_THERM_LSB,
> >> + .status = RR_ADC_BATT_THERM_STS,
> >> + .size = 2,
> >> + .trigger_addr = RR_ADC_BATT_THERM_TRIGGER,
> >> + }, {
> >> + .label = "pmi8998_skin",
> >> + .lsb = RR_ADC_SKIN_TEMP_LSB,
> >> + .status = RR_ADC_AUX_THERM_STS,
> >> + .size = 2,
> >> + .trigger_addr = RR_ADC_AUX_THERM_TRIGGER,
> >> + }, {
> >> + .label = "usbin_i",
> >> + .lsb = RR_ADC_USB_IN_I_LSB,
> >> + .status = RR_ADC_USB_IN_I_STS,
> >> + .size = 2,
> >> + .trigger_addr = RR_ADC_USB_IN_I_TRIGGER,
> >> + }, {
> >> + .label = "usbin_v",
> >> + .lsb = RR_ADC_USB_IN_V_LSB,
> >> + .status = RR_ADC_USB_IN_V_STS,
> >> + .size = 2,
> >> + .trigger_addr = RR_ADC_USB_IN_V_TRIGGER,
> >> + .trigger_mask = BIT(7),
> >> + }, {
> >> + .label = "dcin_i",
> >> + .lsb = RR_ADC_DC_IN_I_LSB,
> >> + .status = RR_ADC_DC_IN_I_STS,
> >> + .size = 2,
> >> + .trigger_addr = RR_ADC_DC_IN_I_TRIGGER,
> >> + }, {
> >> + .label = "dcin_v",
> >> + .lsb = RR_ADC_DC_IN_V_LSB,
> >> + .status = RR_ADC_DC_IN_V_STS,
> >> + .size = 2,
> >> + .trigger_addr = RR_ADC_DC_IN_V_TRIGGER,
> >> + }, {
> >> + .label = "pmi8998_die",
> >> + .lsb = RR_ADC_PMI_DIE_TEMP_LSB,
> >> + .status = RR_ADC_PMI_DIE_TEMP_STS,
> >> + .size = 2,
> >> + .trigger_addr = RR_ADC_PMI_DIE_TEMP_TRIGGER,
> >> + .trigger_mask = RR_ADC_TRIGGER_EVERY_CYCLE,
> >> + }, {
> >> + .label = "chg",
> >> + .lsb = RR_ADC_CHARGER_TEMP_LSB,
> >> + .status = RR_ADC_CHARGER_TEMP_STS,
> >> + .size = 2,
> >> + .trigger_addr = RR_ADC_CHARGER_TEMP_TRIGGER,
> >> + }, {
> >> + .label = "gpio",
> >> + .lsb = RR_ADC_GPIO_LSB,
> >> + .status = RR_ADC_GPIO_STS,
> >> + .size = 2,
> >> + .trigger_addr = RR_ADC_GPIO_TRIGGER,
> >> + },
> >> +};
> >> +
> >> +static const struct iio_chan_spec rradc_iio_chans[RR_ADC_CHAN_MAX] = {
> >> + {
> >> + .type = IIO_RESISTANCE,
> >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> >> + .address = RR_ADC_BATT_ID,
> >> + .channel = 0,
> >> + .indexed = 1,
> >> + }, {
> >> + .type = IIO_TEMP,
> >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> >> + .address = RR_ADC_BATT_THERM,
> >> + .channel = 0,
> >> + .indexed = 1,
> >> + }, {
> >> + .type = IIO_TEMP,
> >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> + BIT(IIO_CHAN_INFO_SCALE) |
> >> + BIT(IIO_CHAN_INFO_OFFSET),
> >> + .address = RR_ADC_SKIN_TEMP,
> >> + .channel = 1,
> >> + .indexed = 1,
> >> + }, {
> >> + .type = IIO_CURRENT,
> >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> + BIT(IIO_CHAN_INFO_SCALE),
> >> + .address = RR_ADC_USBIN_I,
> >> + .channel = 0,
> >> + .indexed = 1,
> >> + }, {
> >> + .type = IIO_VOLTAGE,
> >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> + BIT(IIO_CHAN_INFO_SCALE),
> >> + .address = RR_ADC_USBIN_V,
> >> + .channel = 0,
> >> + .indexed = 1,
> >> + }, {
> >> + .type = IIO_CURRENT,
> >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> + BIT(IIO_CHAN_INFO_SCALE),
> >> + .address = RR_ADC_DCIN_I,
> >> + .channel = 1,
> >> + .indexed = 1,
> >> + }, {
> >> + .type = IIO_VOLTAGE,
> >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> + BIT(IIO_CHAN_INFO_SCALE),
> >> + .address = RR_ADC_DCIN_V,
> >> + .channel = 1,
> >> + .indexed = 1,
> >> + }, {
> >> + .type = IIO_TEMP,
> >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> + BIT(IIO_CHAN_INFO_SCALE) |
> >> + BIT(IIO_CHAN_INFO_OFFSET),
> >> + .address = RR_ADC_DIE_TEMP,
> >> + .channel = 2,
> >> + .indexed = 1,
> >> + }, {
> >> + .type = IIO_TEMP,
> >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> + BIT(IIO_CHAN_INFO_OFFSET) |
> >> + BIT(IIO_CHAN_INFO_SCALE),
> >> + .address = RR_ADC_CHG_TEMP,
> >> + .channel = 3,
> >> + .indexed = 1,
> >> + }, {
> >> + .type = IIO_VOLTAGE,
> >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >> + BIT(IIO_CHAN_INFO_SCALE),
> >> + .address = RR_ADC_GPIO,
> >> + .channel = 2,
> >> + .indexed = 1,
> >> + },
> >> +};
> >> +
> >
>
