[PATCH v2 3/4] pinctrl: qcom: msm8916: Allow CAMSS GP clocks to be muxed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



GPIO 31, 32 can be muxed to GCC_CAMSS_GP(1,2)_CLK respectively but the
function was never assigned to the pingroup (even though the function
exists already).

Add this mode to the related pins.

Fixes: 5373a2c5abb6 ("pinctrl: qcom: Add msm8916 pinctrl driver")
Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
---
 drivers/pinctrl/qcom/pinctrl-msm8916.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm8916.c b/drivers/pinctrl/qcom/pinctrl-msm8916.c
index 396db12ae904..bf68913ba821 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm8916.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8916.c
@@ -844,8 +844,8 @@ static const struct msm_pingroup msm8916_groups[] = {
 	PINGROUP(28, pwr_modem_enabled_a, NA, NA, NA, NA, NA, qdss_tracedata_b, NA, atest_combodac),
 	PINGROUP(29, cci_i2c, NA, NA, NA, NA, NA, qdss_tracedata_b, NA, atest_combodac),
 	PINGROUP(30, cci_i2c, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b),
-	PINGROUP(31, cci_timer0, NA, NA, NA, NA, NA, NA, NA, NA),
-	PINGROUP(32, cci_timer1, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(31, cci_timer0, flash_strobe, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(32, cci_timer1, flash_strobe, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(33, cci_async, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b),
 	PINGROUP(34, pwr_nav_enabled_a, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b),
 	PINGROUP(35, pwr_crypto_enabled_a, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b),
-- 
2.35.3




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux