Re: [PATCH v4] drm/msm/dp: force link training for display resolution change

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Kuogee Hsieh (2022-05-27 14:32:13)
> During display resolution changes display have to be disabled first
> followed by display enabling with new resolution. Display disable
> will turn off both pixel clock and main link clock so that main link
> have to be re trained during display enable to have new video stream

s/re/re-/

> flow again. At current implementation, display enable function manually
> kicks up irq_hpd_handle which will read panel link status and start link
> training if link status is not in sync state. However, there is rare
> case that a particular panel links status keep staying in sync for
> some period of time after main link had been shut down previously at
> display disabled. Main link retraining will not be executed by
> irq_hdp_handle() if the link status read from pane shows it is in

s/pane/panel/

> sync state. If this was happen, then video stream of newer display
> resolution will fail to be transmitted to panel due to main link is
> not in sync between host and panel. This patch force main link always
> be retrained during display enable procedure to prevent this rare
> failed case from happening. Also this implementation are more
> efficient than manual kicking off irq_hpd_handle function.

The description makes it sound like the link status is not updated,
sometimes. Isn't that the real issue here? Not that link training needs
to be done again (which it always does apparently), but that disabling
the display doesn't wait for the link to go down. Or disabling the link
is causing some sort of glitch on the sink causing it to report the
status as OK when it really isn't.

>
> Changes in v2:
> -- set force_link_train flag on DP only (is_edp == false)
>
> Changes in v3:
> -- revise commit  text
> -- add Fixes tag
>
> Changes in v4:
> -- revise commit  text
>
> Fixes: 62671d2ef24b ("drm/msm/dp: fixes wrong connection state caused by failure of link train")
> Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>

> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index c388323..370348d 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -1688,10 +1689,14 @@ void dp_bridge_enable(struct drm_bridge *drm_bridge)
>
>         state =  dp_display->hpd_state;
>
> -       if (state == ST_DISPLAY_OFF)
> +       if (state == ST_DISPLAY_OFF) {
>                 dp_display_host_phy_init(dp_display);
>
> -       dp_display_enable(dp_display, 0);
> +               if (!dp->is_edp)

Does this assume eDP has one resolution? I don't understand why eDP is
special here, especially if eDP has more than one resolution available
it seems like we would want to retrain the link regardless.

> +                       force_link_train = true;
> +       }
> +
> +       dp_display_enable(dp_display, force_link_train);
>
>         rc = dp_display_post_enable(dp);
>         if (rc) {



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux