[RFC PATCH 03/28] phy: qcom-qmp-combo,usb: add support for separate PCS_USB region

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Different QMP USB PHYs might have different offset from PCS to PCS_USB
register space, but the same PCS_USB register layout. Add separate
PCS_USB region space and merge related PCS_USB definitions.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c |  47 +++++++--
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c   | 118 ++++++++++++++--------
 drivers/phy/qualcomm/phy-qcom-qmp.h       | 106 +++++++++----------
 3 files changed, 163 insertions(+), 108 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 893b5a4bb554..fd7a9c25f27d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -155,8 +155,10 @@ static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_START_CTRL]		= 0x44,
 	[QPHY_PCS_STATUS]		= 0x14,
 	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x40,
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x308,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
+
+	/* In PCS_USB */
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x008,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x014,
 };
 
 static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
@@ -451,6 +453,9 @@ static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_pcs_usb_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
 };
@@ -520,6 +525,9 @@ static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_pcs_usb_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
 };
@@ -622,6 +630,8 @@ struct qmp_phy_cfg {
 	int rx_tbl_num;
 	const struct qmp_phy_init_tbl *pcs_tbl;
 	int pcs_tbl_num;
+	const struct qmp_phy_init_tbl *pcs_usb_tbl;
+	int pcs_usb_tbl_num;
 
 	/* Init sequence for DP PHY block link rates */
 	const struct qmp_phy_init_tbl *serdes_tbl_rbr;
@@ -667,6 +677,10 @@ struct qmp_phy_cfg {
 	bool has_phy_dp_com_ctrl;
 	/* true, if PHY has secondary tx/rx lanes to be configured */
 	bool is_dual_lane_phy;
+
+	/* Offset from PCS to PCS_USB region */
+	unsigned int pcs_usb_offset;
+
 };
 
 struct qmp_phy_combo_cfg {
@@ -686,6 +700,7 @@ struct qmp_phy_combo_cfg {
  * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
  * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
  * @pcs_misc: iomapped memory space for lane's pcs_misc
+ * @pcs_usb: iomapped memory space for lane's pcs_usb
  * @pipe_clk: pipe clock
  * @index: lane index
  * @qmp: QMP phy to which this lane belongs
@@ -705,6 +720,7 @@ struct qmp_phy {
 	void __iomem *tx2;
 	void __iomem *rx2;
 	void __iomem *pcs_misc;
+	void __iomem *pcs_usb;
 	struct clk *pipe_clk;
 	unsigned int index;
 	struct qcom_qmp *qmp;
@@ -898,6 +914,8 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(sm8150_usb3_rx_tbl),
 	.pcs_tbl		= sm8150_usb3_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(sm8150_usb3_pcs_tbl),
+	.pcs_usb_tbl		= sm8150_usb3_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl),
 	.clk_list		= qmp_v4_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
@@ -905,6 +923,7 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v4_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x300,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -971,6 +990,8 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(sm8250_usb3_rx_tbl),
 	.pcs_tbl		= sm8250_usb3_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(sm8250_usb3_pcs_tbl),
+	.pcs_usb_tbl		= sm8250_usb3_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8250_usb3_pcs_usb_tbl),
 	.clk_list		= qmp_v4_sm8250_usbphy_clk_l,
 	.num_clks		= ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
@@ -978,6 +999,7 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v4_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x300,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -1862,7 +1884,7 @@ static int qcom_qmp_phy_combo_set_mode(struct phy *phy,
 static void qcom_qmp_phy_combo_enable_autonomous_mode(struct qmp_phy *qphy)
 {
 	const struct qmp_phy_cfg *cfg = qphy->cfg;
-	void __iomem *pcs = qphy->pcs;
+	void __iomem *pcs_usb = qphy->pcs_usb ?: qphy->pcs;
 	void __iomem *pcs_misc = qphy->pcs_misc;
 	u32 intr_mask;
 
@@ -1873,15 +1895,15 @@ static void qcom_qmp_phy_combo_enable_autonomous_mode(struct qmp_phy *qphy)
 		intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
 
 	/* Clear any pending interrupts status */
-	qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+	qphy_setbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
 	/* Writing 1 followed by 0 clears the interrupt */
-	qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+	qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
 
-	qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+	qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
 		     ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
 
 	/* Enable required PHY autonomous mode interrupts */
-	qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
+	qphy_setbits(pcs_usb, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
 
 	/* Enable i/o clamp_n for autonomous mode */
 	if (pcs_misc)
@@ -1891,19 +1913,19 @@ static void qcom_qmp_phy_combo_enable_autonomous_mode(struct qmp_phy *qphy)
 static void qcom_qmp_phy_combo_disable_autonomous_mode(struct qmp_phy *qphy)
 {
 	const struct qmp_phy_cfg *cfg = qphy->cfg;
-	void __iomem *pcs = qphy->pcs;
+	void __iomem *pcs_usb = qphy->pcs_usb ?: qphy->pcs_usb;
 	void __iomem *pcs_misc = qphy->pcs_misc;
 
 	/* Disable i/o clamp_n on resume for normal mode */
 	if (pcs_misc)
 		qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
 
-	qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+	qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
 		     ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
 
-	qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+	qphy_setbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
 	/* Writing 1 followed by 0 clears the interrupt */
-	qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+	qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
 }
 
 static int __maybe_unused qcom_qmp_phy_combo_runtime_suspend(struct device *dev)
@@ -2323,6 +2345,9 @@ int qcom_qmp_phy_combo_create(struct device *dev, struct device_node *np, int id
 	if (!qphy->pcs)
 		return -ENOMEM;
 
+	if (cfg->pcs_usb_offset)
+		qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset;
+
 	/*
 	 * If this is a dual-lane PHY, then there should be registers for the
 	 * second lane. Some old device trees did not specify this, so fall
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index aebe5ed4e4e3..b1f2f825bd21 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -169,26 +169,10 @@ static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_START_CTRL]		= 0x44,
 	[QPHY_PCS_STATUS]		= 0x14,
 	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x40,
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x308,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
-};
 
-static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= 0x00,
-	[QPHY_START_CTRL]		= 0x44,
-	[QPHY_PCS_STATUS]		= 0x14,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x40,
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x608,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x614,
-};
-
-static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= 0x00,
-	[QPHY_START_CTRL]		= 0x44,
-	[QPHY_PCS_STATUS]		= 0x14,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x40,
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x1008,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x1014,
+	/* In PCS_USB */
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x008,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x014,
 };
 
 static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
@@ -777,6 +761,9 @@ static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_pcs_usb_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
 };
@@ -878,8 +865,6 @@ static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
@@ -889,6 +874,11 @@ static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
 };
 
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_usb_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
 static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
 	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
@@ -954,6 +944,9 @@ static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_pcs_usb_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
 };
@@ -1015,8 +1008,6 @@ static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
@@ -1025,6 +1016,11 @@ static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
 };
 
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_usb_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+};
+
 static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
 	QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
@@ -1171,8 +1167,6 @@ static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
 };
 
 static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
-	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
-	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
@@ -1187,6 +1181,11 @@ static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_pcs_usb_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
 	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
 	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
 };
@@ -1244,8 +1243,6 @@ static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
-	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
-	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
@@ -1254,6 +1251,11 @@ static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
 };
 
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_usb_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+};
+
 static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@@ -1365,6 +1367,8 @@ struct qmp_phy_cfg {
 	int rx_tbl_num;
 	const struct qmp_phy_init_tbl *pcs_tbl;
 	int pcs_tbl_num;
+	const struct qmp_phy_init_tbl *pcs_usb_tbl;
+	int pcs_usb_tbl_num;
 
 	/* clock ids to be requested */
 	const char * const *clk_list;
@@ -1394,6 +1398,9 @@ struct qmp_phy_cfg {
 	bool has_phy_dp_com_ctrl;
 	/* true, if PHY has secondary tx/rx lanes to be configured */
 	bool is_dual_lane_phy;
+
+	/* Offset from PCS to PCS_USB region */
+	unsigned int pcs_usb_offset;
 };
 
 /**
@@ -1408,6 +1415,7 @@ struct qmp_phy_cfg {
  * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
  * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
  * @pcs_misc: iomapped memory space for lane's pcs_misc
+ * @pcs_usb: iomapped memory space for lane's pcs_usb
  * @pipe_clk: pipe clock
  * @index: lane index
  * @qmp: QMP phy to which this lane belongs
@@ -1423,6 +1431,7 @@ struct qmp_phy {
 	void __iomem *tx2;
 	void __iomem *rx2;
 	void __iomem *pcs_misc;
+	void __iomem *pcs_usb;
 	struct clk *pipe_clk;
 	unsigned int index;
 	struct qcom_qmp *qmp;
@@ -1703,6 +1712,8 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(sm8150_usb3_rx_tbl),
 	.pcs_tbl		= sm8150_usb3_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(sm8150_usb3_pcs_tbl),
+	.pcs_usb_tbl		= sm8150_usb3_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl),
 	.clk_list		= qmp_v4_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
@@ -1710,6 +1721,7 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v4_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x300,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -1736,13 +1748,16 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
 	.pcs_tbl		= sm8150_usb3_uniphy_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
+	.pcs_usb_tbl		= sm8150_usb3_uniphy_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8150_usb3_uniphy_pcs_usb_tbl),
 	.clk_list		= qmp_v4_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= qmp_v4_usb3_uniphy_regs_layout,
+	.regs			= qmp_v4_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x600,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -1765,6 +1780,8 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(sm8250_usb3_rx_tbl),
 	.pcs_tbl		= sm8250_usb3_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(sm8250_usb3_pcs_tbl),
+	.pcs_usb_tbl		= sm8250_usb3_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8250_usb3_pcs_usb_tbl),
 	.clk_list		= qmp_v4_sm8250_usbphy_clk_l,
 	.num_clks		= ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
@@ -1772,6 +1789,7 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v4_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x300,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -1797,13 +1815,16 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
 	.pcs_tbl		= sm8250_usb3_uniphy_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+	.pcs_usb_tbl		= sm8250_usb3_uniphy_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8250_usb3_uniphy_pcs_usb_tbl),
 	.clk_list		= qmp_v4_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= qmp_v4_usb3_uniphy_regs_layout,
+	.regs			= qmp_v4_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x600,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -1826,13 +1847,16 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
 	.pcs_tbl		= sm8250_usb3_uniphy_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+	.pcs_usb_tbl		= sm8250_usb3_uniphy_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8250_usb3_uniphy_pcs_usb_tbl),
 	.clk_list		= qmp_v4_sdx55_usbphy_clk_l,
 	.num_clks		= ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= qmp_v4_usb3_uniphy_regs_layout,
+	.regs			= qmp_v4_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x600,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -1855,13 +1879,16 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
 	.pcs_tbl		= sm8350_usb3_uniphy_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+	.pcs_usb_tbl		= sm8350_usb3_uniphy_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8350_usb3_uniphy_pcs_usb_tbl),
 	.clk_list		= qmp_v4_sdx55_usbphy_clk_l,
 	.num_clks		= ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= sm8350_usb3_uniphy_regs_layout,
+	.regs			= qmp_v4_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x1000,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -1884,6 +1911,8 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(sm8350_usb3_rx_tbl),
 	.pcs_tbl		= sm8350_usb3_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(sm8350_usb3_pcs_tbl),
+	.pcs_usb_tbl		= sm8350_usb3_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8350_usb3_pcs_usb_tbl),
 	.clk_list		= qmp_v4_sm8250_usbphy_clk_l,
 	.num_clks		= ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
@@ -1891,6 +1920,7 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v4_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x300,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -1916,13 +1946,16 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
 	.pcs_tbl		= sm8350_usb3_uniphy_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+	.pcs_usb_tbl		= sm8350_usb3_uniphy_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8350_usb3_uniphy_pcs_usb_tbl),
 	.clk_list		= qmp_v4_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= sm8350_usb3_uniphy_regs_layout,
+	.regs			= qmp_v4_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x1000,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
@@ -2244,7 +2277,7 @@ static int qcom_qmp_phy_usb_set_mode(struct phy *phy,
 static void qcom_qmp_phy_usb_enable_autonomous_mode(struct qmp_phy *qphy)
 {
 	const struct qmp_phy_cfg *cfg = qphy->cfg;
-	void __iomem *pcs = qphy->pcs;
+	void __iomem *pcs_usb = qphy->pcs_usb ?: qphy->pcs;
 	void __iomem *pcs_misc = qphy->pcs_misc;
 	u32 intr_mask;
 
@@ -2255,15 +2288,15 @@ static void qcom_qmp_phy_usb_enable_autonomous_mode(struct qmp_phy *qphy)
 		intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
 
 	/* Clear any pending interrupts status */
-	qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+	qphy_setbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
 	/* Writing 1 followed by 0 clears the interrupt */
-	qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+	qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
 
-	qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+	qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
 		     ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
 
 	/* Enable required PHY autonomous mode interrupts */
-	qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
+	qphy_setbits(pcs_usb, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
 
 	/* Enable i/o clamp_n for autonomous mode */
 	if (pcs_misc)
@@ -2273,19 +2306,19 @@ static void qcom_qmp_phy_usb_enable_autonomous_mode(struct qmp_phy *qphy)
 static void qcom_qmp_phy_usb_disable_autonomous_mode(struct qmp_phy *qphy)
 {
 	const struct qmp_phy_cfg *cfg = qphy->cfg;
-	void __iomem *pcs = qphy->pcs;
+	void __iomem *pcs_usb = qphy->pcs_usb ?: qphy->pcs;
 	void __iomem *pcs_misc = qphy->pcs_misc;
 
 	/* Disable i/o clamp_n on resume for normal mode */
 	if (pcs_misc)
 		qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
 
-	qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+	qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
 		     ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
 
-	qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+	qphy_setbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
 	/* Writing 1 followed by 0 clears the interrupt */
-	qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+	qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
 }
 
 static int __maybe_unused qcom_qmp_phy_usb_runtime_suspend(struct device *dev)
@@ -2501,6 +2534,9 @@ int qcom_qmp_phy_usb_create(struct device *dev, struct device_node *np, int id,
 	if (!qphy->pcs)
 		return -ENOMEM;
 
+	if (cfg->pcs_usb_offset)
+		qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset;
+
 	/*
 	 * If this is a dual-lane PHY, then there should be registers for the
 	 * second lane. Some old device trees did not specify this, so fall
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 581f09c71667..c07227f352b3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -1006,29 +1006,31 @@
 #define QPHY_V4_PCS_EQ_CONFIG3				0x1e4
 #define QPHY_V4_PCS_EQ_CONFIG4				0x1e8
 #define QPHY_V4_PCS_EQ_CONFIG5				0x1ec
-#define QPHY_V4_PCS_USB3_POWER_STATE_CONFIG1		0x300
-#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_STATUS		0x304
-#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL		0x308
-#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL2		0x30c
-#define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS	0x310
-#define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR		0x314
-#define QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL	0x318
-#define QPHY_V4_PCS_USB3_LFPS_TX_ECSTART		0x31c
-#define QPHY_V4_PCS_USB3_LFPS_PER_TIMER_VAL		0x320
-#define QPHY_V4_PCS_USB3_LFPS_TX_END_CNT_U3_START	0x324
-#define QPHY_V4_PCS_USB3_RXEQTRAINING_LOCK_TIME		0x328
-#define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME		0x32c
-#define QPHY_V4_PCS_USB3_RXEQTRAINING_CTLE_TIME		0x330
-#define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2	0x334
-#define QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2	0x338
-#define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L		0x33c
-#define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_H		0x340
-#define QPHY_V4_PCS_USB3_ARCVR_DTCT_EN_PERIOD		0x344
-#define QPHY_V4_PCS_USB3_ARCVR_DTCT_CM_DLY		0x348
-#define QPHY_V4_PCS_USB3_TXONESZEROS_RUN_LENGTH		0x34c
-#define QPHY_V4_PCS_USB3_ALFPS_DEGLITCH_VAL		0x350
-#define QPHY_V4_PCS_USB3_SIGDET_STARTUP_TIMER_VAL	0x354
-#define QPHY_V4_PCS_USB3_TEST_CONTROL			0x358
+
+/* Only for QMP V4 PHY - USB3 PCS registers */
+#define QPHY_V4_PCS_USB3_POWER_STATE_CONFIG1		0x000
+#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_STATUS		0x004
+#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL		0x008
+#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL2		0x00c
+#define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS	0x010
+#define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR		0x014
+#define QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL	0x018
+#define QPHY_V4_PCS_USB3_LFPS_TX_ECSTART		0x01c
+#define QPHY_V4_PCS_USB3_LFPS_PER_TIMER_VAL		0x020
+#define QPHY_V4_PCS_USB3_LFPS_TX_END_CNT_U3_START	0x024
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_LOCK_TIME		0x028
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME		0x02c
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_CTLE_TIME		0x030
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2	0x034
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2	0x038
+#define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L		0x03c
+#define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_H		0x040
+#define QPHY_V4_PCS_USB3_ARCVR_DTCT_EN_PERIOD		0x044
+#define QPHY_V4_PCS_USB3_ARCVR_DTCT_CM_DLY		0x048
+#define QPHY_V4_PCS_USB3_TXONESZEROS_RUN_LENGTH		0x04c
+#define QPHY_V4_PCS_USB3_ALFPS_DEGLITCH_VAL		0x050
+#define QPHY_V4_PCS_USB3_SIGDET_STARTUP_TIMER_VAL	0x054
+#define QPHY_V4_PCS_USB3_TEST_CONTROL			0x058
 
 /* Only for QMP V4_20 PHY - USB/PCIe PCS registers */
 #define QPHY_V4_20_PCS_RX_SIGDET_LVL			0x188
@@ -1036,10 +1038,6 @@
 #define QPHY_V4_20_PCS_EQ_CONFIG4			0x1e0
 #define QPHY_V4_20_PCS_EQ_CONFIG5			0x1e4
 
-/* Only for QMP V4 PHY - UNI has 0x300 offset for PCS_USB3 regs */
-#define QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL	0x618
-#define QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2	0x638
-
 /* Only for QMP V4 PHY - PCS_MISC registers */
 #define QPHY_V4_PCS_MISC_TYPEC_CTRL			0x00
 #define QPHY_V4_PCS_MISC_TYPEC_PWRDN_CTRL		0x04
@@ -1290,34 +1288,30 @@
 #define QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1		0x1e0
 
 /* Only for QMP V5 PHY - USB3 have different offsets than V4 */
-#define QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1		0x300
-#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_STATUS		0x304
-#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL		0x308
-#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL2		0x30c
-#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS	0x310
-#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR		0x314
-#define QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL	0x318
-#define QPHY_V5_PCS_USB3_LFPS_TX_ECSTART		0x31c
-#define QPHY_V5_PCS_USB3_LFPS_PER_TIMER_VAL		0x320
-#define QPHY_V5_PCS_USB3_LFPS_TX_END_CNT_U3_START	0x324
-#define QPHY_V5_PCS_USB3_LFPS_CONFIG1			0x328
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_LOCK_TIME		0x32c
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME		0x330
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_CTLE_TIME		0x334
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2	0x338
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2	0x33c
-#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L		0x340
-#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H		0x344
-#define QPHY_V5_PCS_USB3_ARCVR_DTCT_EN_PERIOD		0x348
-#define QPHY_V5_PCS_USB3_ARCVR_DTCT_CM_DLY		0x34c
-#define QPHY_V5_PCS_USB3_TXONESZEROS_RUN_LENGTH		0x350
-#define QPHY_V5_PCS_USB3_ALFPS_DEGLITCH_VAL		0x354
-#define QPHY_V5_PCS_USB3_SIGDET_STARTUP_TIMER_VAL	0x358
-#define QPHY_V5_PCS_USB3_TEST_CONTROL			0x35c
-#define QPHY_V5_PCS_USB3_RXTERMINATION_DLY_SEL		0x360
-
-/* Only for QMP V5 PHY - UNI has 0x1000 offset for PCS_USB3 regs */
-#define QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL	0x1018
-#define QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2	0x103c
+#define QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1		0x000
+#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_STATUS		0x004
+#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL		0x008
+#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL2		0x00c
+#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS	0x010
+#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR		0x014
+#define QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL	0x018
+#define QPHY_V5_PCS_USB3_LFPS_TX_ECSTART		0x01c
+#define QPHY_V5_PCS_USB3_LFPS_PER_TIMER_VAL		0x020
+#define QPHY_V5_PCS_USB3_LFPS_TX_END_CNT_U3_START	0x024
+#define QPHY_V5_PCS_USB3_LFPS_CONFIG1			0x028
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_LOCK_TIME		0x02c
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME		0x030
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_CTLE_TIME		0x034
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2	0x038
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2	0x03c
+#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L		0x040
+#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H		0x044
+#define QPHY_V5_PCS_USB3_ARCVR_DTCT_EN_PERIOD		0x048
+#define QPHY_V5_PCS_USB3_ARCVR_DTCT_CM_DLY		0x04c
+#define QPHY_V5_PCS_USB3_TXONESZEROS_RUN_LENGTH		0x050
+#define QPHY_V5_PCS_USB3_ALFPS_DEGLITCH_VAL		0x054
+#define QPHY_V5_PCS_USB3_SIGDET_STARTUP_TIMER_VAL	0x058
+#define QPHY_V5_PCS_USB3_TEST_CONTROL			0x05c
+#define QPHY_V5_PCS_USB3_RXTERMINATION_DLY_SEL		0x060
 
 #endif
-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux