[PATCH 00/34] make iio inkern interface firmware agnostic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The main goal of this patchset is to convert the iio inkern interface to
be firmware agnostic. Some previous discussion was done in here [1].
Though something odd happened while sending the patches and the RFC
actually never landed in the IIO list (hopefully now works):

As suggested by Andy, the series can be seen in three blocks:

1) "Fix" all drivers that were relying on iio.h for specific header
files (mainly of.h and mod_devicetable.h). After that we can drop
of.h from iio.h and just forward declare what we need.

2) Move "most" of the IIO in kernel interface to FW API. At this point,
there's still some OF dependent API in place so that users are not broken.

3) Move all users of the IIO in kernel interface to the FW API and with
that, make IIO firmware agnostic.

On 3), the qcom-spmi-adc-tm5.c driver was only converted to use the IIO
API while on the IIO drivers a full driver conversion was done. The
thermal one would be really non trivial as we would also need to touch the
subsystem. On the IIO drivers, the conversions were mostly peacefull
(apparently). Special care for the stm32-adc.c driver though as that one
was far from being straight :).

Lastly, this is only compile tested with allyesconfig for arm and arm64.
While I surely can come up with some dummy devices to make sure I can still
properly get IIO channels, having proper tested-by tags on platforms
relying on this interface would be very appreciated (and I suspect Jonathan
will require it).

[1]: https://lore.kernel.org/linux-iio/20220604141925.129f0ffe@jic23-huawei/T/#mfd5ccd793841569182e4f831f2c46089b665c346

Nuno Sá (34):
  iio: adc: ad7606: explicitly add proper header files
  iio: adc: ad7606_par: explicitly add proper header files
  iio: adc: berlin2-adc: explicitly add proper header files
  iio: adc: imx7d_adc: explicitly add proper header files
  iio: adc: imx8qxp-adc: explicitly add proper header files
  iio: adc: ingenic-adc: explicitly add proper header files
  iio: adc: mp2629_adc: explicitly add proper header files
  iio: adc: mt6360-adc: explicitly add proper header files
  iio: adc: npcm_adc: explicitly add proper header files
  iio: adc: rzg2l_adc: explicitly add proper header files
  iio: common: cros_ec_lid_angle: explicitly add proper header files
  iio: common: cros_ec_sensors: explicitly add proper header files
  iio: dac: stm32-dac: explicitly add proper header files
  iio: dac: vf610_dac: explicitly add proper header files
  iio: humidity: hts221_buffer: explicitly add proper header files
  iio: light: cros_ec_light_prox: explicitly add proper header files
  iio: pressure: cros_ec_baro: explicitly add proper header files
  iio: trigger: stm32-lptimer-trigger: explicitly add proper header
    files
  iio: core: drop of.h from iio.h
  iio: inkern: only relase the device node when done with it
  iio: inkern: fix return value in devm_of_iio_channel_get_by_name()
  iio: inkern: only return error codes in iio_channel_get_*() APIs
  iio: inkern: split of_iio_channel_get_by_name()
  iio: inkern: move to fwnode properties
  thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API
  iio: adc: ingenic-adc: convert to IIO fwnode interface
  iio: adc: ab8500-gpadc: convert to device properties
  iio: adc: at91-sama5d2_adc: convert to device properties
  iio: adc: qcom-pm8xxx-xoadc: convert to device properties
  iio: adc: qcom-spmi-vadc: convert to device properties
  iio: adc: qcom-spmi-adc5: convert to device properties
  iio: adc: stm32-adc: convert to device properties
  iio: inkern: remove OF dependencies
  iio: inkern: fix coding style warnings

 drivers/iio/adc/ab8500-gpadc.c                |  27 +-
 drivers/iio/adc/ad7606.c                      |   1 +
 drivers/iio/adc/ad7606_par.c                  |   1 +
 drivers/iio/adc/at91-sama5d2_adc.c            |  30 +--
 drivers/iio/adc/berlin2-adc.c                 |   2 +
 drivers/iio/adc/imx7d_adc.c                   |   1 +
 drivers/iio/adc/imx8qxp-adc.c                 |   1 +
 drivers/iio/adc/ingenic-adc.c                 |   9 +-
 drivers/iio/adc/mp2629_adc.c                  |   1 +
 drivers/iio/adc/mt6360-adc.c                  |   1 +
 drivers/iio/adc/npcm_adc.c                    |   1 +
 drivers/iio/adc/qcom-pm8xxx-xoadc.c           |  58 ++---
 drivers/iio/adc/qcom-spmi-adc5.c              |  63 +++--
 drivers/iio/adc/qcom-spmi-vadc.c              |  44 ++--
 drivers/iio/adc/rzg2l_adc.c                   |   1 +
 drivers/iio/adc/stm32-adc.c                   | 128 +++++-----
 .../cros_ec_sensors/cros_ec_lid_angle.c       |   1 +
 .../common/cros_ec_sensors/cros_ec_sensors.c  |   1 +
 drivers/iio/dac/stm32-dac.c                   |   2 +
 drivers/iio/dac/vf610_dac.c                   |   1 +
 drivers/iio/humidity/hts221_buffer.c          |   1 +
 drivers/iio/inkern.c                          | 241 +++++++++---------
 drivers/iio/light/cros_ec_light_prox.c        |   1 +
 drivers/iio/pressure/cros_ec_baro.c           |   1 +
 drivers/iio/trigger/stm32-lptimer-trigger.c   |   1 +
 drivers/thermal/qcom/qcom-spmi-adc-tm5.c      |   3 +-
 include/linux/iio/consumer.h                  |  28 +-
 include/linux/iio/iio.h                       |   9 +-
 28 files changed, 347 insertions(+), 312 deletions(-)

-- 
2.36.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux