Re: [PATCH v1] Bluetooth: hci_sync: Fix setup CVSD SCO failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Zijun,


Thank you for your patch.

Am 09.06.22 um 10:10 schrieb Zijun Hu:

Maybe for the summary:

Bluetooth: Fix CVSD SCO setup failure

It will setup SCO after all CVSD eSCO attempts failure, but

The verb is spelled with a space: set up

still fails to setup SCO finally due to wrong D1/D0 @retrans_effort

Ditto.

within @esco_param_cvsd, so change it from 0x1 to 0xff to avoid
Invalid HCI Command Parameters error.

< HCI Command: Setup Synchrono.. (0x01|0x0028) plen 17  #3427
         Handle: 3
         Transmit bandwidth: 8000
         Receive bandwidth: 8000
         Max latency: 65535
         Setting: 0x0060
           Input Coding: Linear
           Input Data Format: 2's complement
           Input Sample Size: 16-bit
           # of bits padding at MSB: 0
           Air Coding Format: CVSD
         Retransmission effort: Optimize for power consumption (0x01)
         Packet type: 0x03c4
           HV3 may be used
           2-EV3 may not be used
           3-EV3 may not be used
           2-EV5 may not be used
           3-EV5 may not be used
HCI Event: Command Status (0x0f) plen 4               #3428
       Setup Synchronous Connection (0x01|0x0028) ncmd 1
         Status: Success (0x00)
HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #3429
         Status: Invalid HCI Command Parameters (0x12)
         Handle: 0
         Address: 14:3F:A6:47:56:15 (OUI 14-3F-A6)
         Link type: SCO (0x00)
         Transmission interval: 0x00
         Retransmission window: 0x00
         RX packet length: 0
         TX packet length: 0
         Air mode: u-law log (0x00)

What is your test setup to reproduce it?

Signed-off-by: Zijun Hu <quic_zijuhu@xxxxxxxxxxx>
---
  net/bluetooth/hci_conn.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 7829433d54c1..2627d5ac15d6 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -45,8 +45,8 @@ static const struct sco_param esco_param_cvsd[] = {
  	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000a,	0x01 }, /* S3 */
  	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x0007,	0x01 }, /* S2 */
  	{ EDR_ESCO_MASK | ESCO_EV3,   0x0007,	0x01 }, /* S1 */
-	{ EDR_ESCO_MASK | ESCO_HV3,   0xffff,	0x01 }, /* D1 */
-	{ EDR_ESCO_MASK | ESCO_HV1,   0xffff,	0x01 }, /* D0 */
+	{ EDR_ESCO_MASK | ESCO_HV3,   0xffff,	0xff }, /* D1 */
+	{ EDR_ESCO_MASK | ESCO_HV1,   0xffff,	0xff }, /* D0 */
  };
static const struct sco_param sco_param_cvsd[] = {


Kind regards,

Paul



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux