Re: [PATCH 3/3] watchdog: qcom: register a restart notifier

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 18, 2014 at 07:47:54PM -0700, Guenter Roeck wrote:
> On 09/18/2014 03:27 PM, Josh Cartwright wrote:
> >The WDT's BITE_TIME warm-reset behavior can be leveraged as a last
> >resort mechanism for triggering chip reset.  Usually, other restart
> >methods (such as PS_HOLD) are preferrable for issuing a more complete
> >reset of the chip.  As such, keep the priority of the watchdog notifier
> >low.
> >
> >Signed-off-by: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
[..]
> >+static int qcom_wdt_restart(struct notifier_block *nb, unsigned long action,
> >+			    void *data)
> >+{
> >+	struct qcom_wdt *wdt = container_of(nb, struct qcom_wdt, restart_nb);
> >+
> >+	/*
> >+	 * Trigger watchdog bite:
> >+	 *    Setup BITE_TIME to be very low, and enable WDT.
> >+	 */
> >+	mutex_lock(&wdt->wdd.lock);
> 
> At this time you don't need to worry about locks.
> 
> Actually, this might be dangerous if the lock happens to be taken,
> as it won't be released (there is no other code running anymore
> when this function is called).

Ah, great.  I'll drop the locking.

> >+	writel_relaxed(0, wdt->base + WDT_EN);
> >+	writel_relaxed(1, wdt->base + WDT_RST);
> >+	writel_relaxed(0x31F3, wdt->base + WDT_BITE_TIME);
> 
> What is the magic here, ie what does 0x31F3 stand for ?

Nothing magic, it's just a reasonably low value to set the bite time
counter at.  It also happens to be the value at reset.

> >+	writel_relaxed(1, wdt->base + WDT_EN);
> >+	mutex_unlock(&wdt->wdd.lock);
> >+	return NOTIFY_DONE;
> >+}
> >+
> >  static int qcom_watchdog_probe(struct platform_device *pdev)
> >  {
> >  	struct qcom_wdt *wdt;
> >@@ -121,6 +141,17 @@ static int qcom_watchdog_probe(struct platform_device *pdev)
> >  		return ret;
> >  	}
> >
> >+	/*
> >+	 * WDT restart notifier has priority 0 (use as a last resort)
> >+	 */
> >+	wdt->restart_nb.notifier_call = qcom_wdt_restart;
> >+	ret = register_restart_handler(&wdt->restart_nb);
> >+	if (ret) {
> >+		dev_err(&pdev->dev, "failed to setup restart handler\n");
> >+		watchdog_unregister_device(&wdt->wdd);
> >+		return ret;
> 
> Sure you want to return an error here ? The watchdog itself is still working,
> and this is supposed to be a restart method of last resort. Causing the driver
> to fail loading because it can not register its restart handler seems to be
> a bit aggressive.

It is a bit aggressive.  I'll at least drop it to a dev_warn(); even
though it is a "last resort", on some boards it's the only available
mechanism for reliable restart.

Thanks!
  Josh

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux