Doing RCU-idle outside the driver, only to then temporarily enable it
again before going idle is daft.
Signed-off-by: Peter Zijlstra (Intel) <peterz@xxxxxxxxxxxxx>
---
drivers/cpuidle/cpuidle-mvebu-v7.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/cpuidle/cpuidle-mvebu-v7.c
+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
@@ -36,7 +36,10 @@ static int mvebu_v7_enter_idle(struct cp
if (drv->states[index].flags & MVEBU_V7_FLAG_DEEP_IDLE)
deepidle = true;
+ rcu_idle_enter();
ret = mvebu_v7_cpu_suspend(deepidle);
+ rcu_idle_exit();
+
cpu_pm_exit();
if (ret)
@@ -49,6 +52,7 @@ static struct cpuidle_driver armadaxp_id
.name = "armada_xp_idle",
.states[0] = ARM_CPUIDLE_WFI_STATE,
.states[1] = {
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = mvebu_v7_enter_idle,
.exit_latency = 100,
.power_usage = 50,
@@ -57,6 +61,7 @@ static struct cpuidle_driver armadaxp_id
.desc = "CPU power down",
},
.states[2] = {
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = mvebu_v7_enter_idle,
.exit_latency = 1000,
.power_usage = 5,
@@ -72,6 +77,7 @@ static struct cpuidle_driver armada370_i
.name = "armada_370_idle",
.states[0] = ARM_CPUIDLE_WFI_STATE,
.states[1] = {
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = mvebu_v7_enter_idle,
.exit_latency = 100,
.power_usage = 5,
@@ -87,6 +93,7 @@ static struct cpuidle_driver armada38x_i
.name = "armada_38x_idle",
.states[0] = ARM_CPUIDLE_WFI_STATE,
.states[1] = {
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = mvebu_v7_enter_idle,
.exit_latency = 10,
.power_usage = 5,
