On 07/06/2022 23:41, Bjorn Andersson wrote:
> Introduce initial support for the Qualcomm SC8280XP platform, aka 8cx
> Gen 3. This initial contribution supports SMP, CPUfreq, CPU cluster
> idling, GCC, TLMM, SMMU, RPMh regulators, power-domains and clocks,
> interconnects, some QUPs, UFS, remoteprocs, USB, watchdog, LLCC and
> tsens.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2195 ++++++++++++++++++++++++
> 1 file changed, 2195 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> new file mode 100644
> index 000000000000..4143813643ad
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -0,0 +1,2195 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +#include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interconnect/qcom,sc8280xp.h>
> +#include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + clocks {
> + xo_board: xo-board {
xo-board-clk
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <38400000>;
The clock is probably on the board, so the frequency should be rather
defined in DTS.
> + };
> +
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32764>;
> + };
> + };
(...)
> +
> + qup1: geniqup@ac0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0 0x00ac0000 0 0x6000>;
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> + clock-names = "m-ahb", "s-ahb";
> + iommus = <&apps_smmu 0x83 0>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + status = "disabled";
> + };
> +
> + ufs_mem_hc: ufshc@1d84000 {
Just "ufs" as node name.
> + compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
> + "jedec,ufs-2.0";
> + reg = <0 0x01d84000 0 0x3000>;
> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&ufs_mem_phy_lanes>;
> + phy-names = "ufsphy";
> + lanes-per-direction = <2>;
> + #reset-cells = <1>;
> + resets = <&gcc GCC_UFS_PHY_BCR>;
> + reset-names = "rst";
> +
> + power-domains = <&gcc UFS_PHY_GDSC>;
> + required-opps = <&rpmhpd_opp_nom>;
> +
> + iommus = <&apps_smmu 0xe0 0x0>;
> +
> + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>
> + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_UFS_PHY_AHB_CLK>,
> + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> + clock-names = "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk",
> + "rx_lane1_sync_clk";
> + freq-table-hz = <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <0 0>,
> + <0 0>;
> + status = "disabled";
> + };
> +
> + ufs_mem_phy: phy@1d87000 {
> + compatible = "qcom,sc8280xp-qmp-ufs-phy";
> + reg = <0 0x01d87000 0 0xe10>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + clock-names = "ref",
> + "ref_aux";
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> +
> + resets = <&ufs_mem_hc 0>;
> + reset-names = "ufsphy";
> + status = "disabled";
> +
> + ufs_mem_phy_lanes: phy@1d87400 {
> + reg = <0 0x01d87400 0 0x108>,
> + <0 0x01d87600 0 0x1e0>,
> + <0 0x01d87c00 0 0x1dc>,
> + <0 0x01d87800 0 0x108>,
> + <0 0x01d87a00 0 0x1e0>;
> + #phy-cells = <0>;
> + #clock-cells = <0>;
> + };
> + };
> +
> + ufs_card_hc: ufshc@1da4000 {
node name: ufs
> + compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
> + "jedec,ufs-2.0";
> + reg = <0 0x01da4000 0 0x3000>;
> + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&ufs_card_phy_lanes>;
> + phy-names = "ufsphy";
> + lanes-per-direction = <2>;
> + #reset-cells = <1>;
> + resets = <&gcc GCC_UFS_CARD_BCR>;
> + reset-names = "rst";
> +
> + power-domains = <&gcc UFS_CARD_GDSC>;
> +
> + iommus = <&apps_smmu 0x4a0 0x0>;
> +
> + clocks = <&gcc GCC_UFS_CARD_AXI_CLK>,
> + <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
> + <&gcc GCC_UFS_CARD_AHB_CLK>,
> + <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>;
> + clock-names = "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk",
> + "rx_lane1_sync_clk";
> + freq-table-hz = <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <0 0>,
> + <0 0>;
> + status = "disabled";
> + };
> +
> + ufs_card_phy: phy@1da7000 {
> + compatible = "qcom,sc8280xp-qmp-ufs-phy";
> + reg = <0 0x01da7000 0 0xe10>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + clock-names = "ref",
> + "ref_aux";
> + clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
> + <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
> +
> + resets = <&ufs_card_hc 0>;
> + reset-names = "ufsphy";
> + status = "disabled";
> +
> + ufs_card_phy_lanes: phy@1da7400 {
> + reg = <0 0x01da7400 0 0x108>,
> + <0 0x01da7600 0 0x1e0>,
> + <0 0x01da7c00 0 0x1dc>,
> + <0 0x01da7800 0 0x108>,
> + <0 0x01da7a00 0 0x1e0>;
> + #phy-cells = <0>;
> + #clock-cells = <0>;
> + };
> + };
> +
> + tcsr_mutex: hwlock@1f40000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x0 0x01f40000 0x0 0x20000>;
> + #hwlock-cells = <1>;
> + };
> +
> + usb_0_hsphy: phy@88e5000 {
> + compatible = "qcom,sc8280xp-usb-hs-phy",
> + "qcom,usb-snps-hs-5nm-phy";
> + reg = <0 0x088e5000 0 0x400>;
> + status = "disabled";
status goes to the end
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
> + clock-names = "ref";
> +
> + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> + };
> +
> + usb_2_hsphy0: phy@88e7000 {
> + compatible = "qcom,sc8280xp-usb-hs-phy",
> + "qcom,usb-snps-hs-5nm-phy";
> + reg = <0 0x088e7000 0 0x400>;
> + status = "disabled";
ditto
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
> + clock-names = "ref";
> +
> + resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
> + };
> +
> + usb_2_hsphy1: phy@88e8000 {
> + compatible = "qcom,sc8280xp-usb-hs-phy",
> + "qcom,usb-snps-hs-5nm-phy";
> + reg = <0 0x088e8000 0 0x400>;
> + status = "disabled";
ditto
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
> + clock-names = "ref";
> +
> + resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
> + };
> +
> + usb_2_hsphy2: phy@88e9000 {
> + compatible = "qcom,sc8280xp-usb-hs-phy",
> + "qcom,usb-snps-hs-5nm-phy";
> + reg = <0 0x088e9000 0 0x400>;
> + status = "disabled";
ditto and so on
Best regards,
Krzysztof
