Use new split QMP PHY driver and remove all monolith phy-qcom-qmp driver. Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Tested-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- drivers/phy/qualcomm/Makefile | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index e9e3b1a4dbb0..65f6c30a3e93 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -5,7 +5,13 @@ obj-$(CONFIG_PHY_QCOM_EDP) += phy-qcom-edp.o obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o -obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o +obj-$(CONFIG_PHY_QCOM_QMP) += \ + phy-qcom-qmp-combo.o \ + phy-qcom-qmp-pcie.o \ + phy-qcom-qmp-pcie-msm8996.o \ + phy-qcom-qmp-ufs.o \ + phy-qcom-qmp-usb.o + obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o -- 2.35.1
