Hi Dolev,
On Wednesday 10 September 2014 05:24 PM, Dolev Raviv wrote:
> From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
>
> This patch adds support for UFS device and UniPro link power management
> during runtime/system PM.
>
<snip>
> +vccq_lpm:
> + ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
> +vcc_disable:
> + ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> +out:
> + return ret;
> +}
> +
> +static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba)
> +{
> + if (ufshcd_is_link_off(hba))
> + ufshcd_setup_hba_vreg(hba, false);
I didn't find any declaration and definition of above API in your patch set.
During compilation of this driver I got a below error, am I missing any thing?
drivers/scsi/ufs/ufshcd.c: In function ‘ufshcd_hba_vreg_set_lpm’:
drivers/scsi/ufs/ufshcd.c:4656:3: error: implicit declaration of
function ‘ufshcd_setup_hba_vreg’ [-Werror=implicit-function-declaration]
ufshcd_setup_hba_vreg(hba, false);
^
> +}
> +
> +static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba)
> +{
> + if (ufshcd_is_link_off(hba))
> + ufshcd_setup_hba_vreg(hba, true);
Ditto.
> }
> -EXPORT_SYMBOL_GPL(ufshcd_suspend);
>
> /**
> - * ufshcd_resume - resume power management function
> + * ufshcd_suspend - helper function for suspend operations
> * @hba: per adapter instance
> + * @pm_op: desired low power operation type
> + *
> + * This function will try to put the UFS device and link into low power
> + * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl"
> + * (System PM level).
> *
<snip>
> +int ufshcd_system_resume(struct ufs_hba *hba)
> +{
> + if (!hba || !hba->is_powered || pm_runtime_suspended(hba->dev))
> + /*
> + * Let the runtime resume take care of resuming
> + * if runtime suspended.
> + */
> + return 0;
> + else
"else" is not generally useful after a break or return.
> + return ufshcd_resume(hba, UFS_SYSTEM_PM);
> +}
> +EXPORT_SYMBOL(ufshcd_system_resume);
> +
> +/**
> + * ufshcd_runtime_suspend - runtime suspend routine
> + * @hba: per adapter instance
> + *
> + * Check the description of ufshcd_suspend() function for more details.
> + *
> + * Returns 0 for success and non-zero for failure
> + */
> +int ufshcd_runtime_suspend(struct ufs_hba *hba)
> +{
> + if (!hba || !hba->is_powered)
> + return 0;
> + else
"else" is not generally useful after a break or return.
> + return ufshcd_suspend(hba, UFS_RUNTIME_PM);
> }
> EXPORT_SYMBOL(ufshcd_runtime_suspend);
>
> +/**
> + * ufshcd_runtime_resume - runtime resume routine
> + * @hba: per adapter instance
> + *
> + * This function basically brings the UFS device, UniPro link and controller
> + * to active state. Following operations are done in this function:
> + *
Thanks,
--Kiran
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
