Hi,
On Thu, Jun 2, 2022 at 12:06 PM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
>
> The sc7180-trogdor-{lazor,homestar}-*.dtsi files all include
> sc7180-trogdor.dtsi and sc7180-trogdor-lazor.dtsi or
> sc7180-trogdor-homestar.dtsi, so including it here in the
> sc7180-trogdor-{lazor,homestar}.dtsi file means we have a duplicate
> include after commit 19794489fa24 ("arm64: dts: qcom: Only include
> sc7180.dtsi in sc7180-trogdor.dtsi"). We include the sc7180-trogdor.dtsi
> file in a board like sc7180-trogdor-lazor-r1.dts so that we can include
> the display bridge snippet (e.g. sc7180-trogdor-ti-sn65dsi86.dtsi)
> instead of making ever increasing variants like
> sc7180-trogdor-lazor-ti-sn65dsi86.dtsi.
>
> Unfortunately, having the double include like this means the display
> bridge's i2c bus is left disabled instead of enabled by the bridge
> snippet. Any boards that use the i2c bus for the display bridge will
> have the bus disabled when we include sc7180-trogdor.dtsi the second
> time, which picks up the i2c status="disabled" line from sc7180.dtsi.
> This leads to the display not turning on and black screens at boot on
> lazor and homestar devices.
>
> Fix this by dropping the include and making a note that the
> sc7180-trogdor-{lazor,homestar}.dtsi file must be included after
> sc7180-trogdor.dtsi
>
> Reported-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Cc: "Joseph S. Barrera III" <joebar@xxxxxxxxxxxx>
> Cc: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> Fixes: 19794489fa24 ("arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi")
> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> ---
>
> It would be great to get this into -rc1 if possible to fix broken
> display.
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
I tested and this fixes the "no display" problem on Linus's tree on
both homestar and lazor.
Tested-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
