Re: [PATCH v12 0/8] PCI: qcom: Fix higher MSI vectors handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 23, 2022 at 09:18:28PM +0300, Dmitry Baryshkov wrote:
> I have replied with my Tested-by to the patch at [2], which has landed
> in the linux-next as the commit 20f1bfb8dd62 ("PCI: qcom:
> Add support for handling MSIs from 8 endpoints"). However lately I
> noticed that during the tests I still had 'pcie_pme=nomsi', so the
> device was not forced to use higher MSI vectors.
> 
> After removing this option I noticed that hight MSI vectors are not
> delivered on tested platforms. After additional research I stumbled upon
> a patch in msm-4.14 ([1]), which describes that each group of MSI
> vectors is mapped to the separate interrupt. Implement corresponding
> mapping.
> 
> The first patch in the series is a revert of  [2] (landed in pci-next).
> Either both patches should be applied or both should be dropped.
> 
> Patchseries dependecies: [3] (for the schema change).
> 
> Changes since v11 (suggested by Johan):
>  - Added back reporting errors for the "msi0" interrupt,
>  - Stopped overriding num_vectors field if it is less than the amount of
>    MSI vectors deduced from interrupt list,
>  - Added a warning (and an override) if the host specifies more MSI
>    vectors than available,
>  - Moved has_split_msi_irq variable to the patch where it is used.

You forgot to CC me this version. Please remember to keep reviewers on
CC.

Johan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux