Add a simple-mfd representing IMEM on SDX65 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteproc.
Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
---
arch/arm/boot/dts/qcom-sdx65.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 669721e..10e3226 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -395,6 +395,19 @@
interrupt-controller;
};
+ imem@1468f000 {
+ compatible = "simple-mfd";
+ reg = <0x1468f000 0x1000>;
+ ranges = <0x0 0x1468f000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pil-reloc@94c {
+ compatible = "qcom,pil-reloc-info";
+ reg = <0x94c 0xc8>;
+ };
+ };
+
apps_smmu: iommu@15000000 {
compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
reg = <0x15000000 0x40000>;
--
2.7.4
