Move support for the USB PHY driver on SC7180 platform to new QMP
driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 42 +++++++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.c | 3 --
2 files changed, 42 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index d8a4b7774b49..8c4a01bdf359 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -565,6 +565,10 @@ static const char * const msm8996_usb3phy_reset_l[] = {
"phy", "common",
};
+static const char * const sc7180_usb3phy_reset_l[] = {
+ "phy",
+};
+
/* list of regulators */
static const char * const qmp_phy_vreg_l[] = {
"vdda-phy", "vdda-pll",
@@ -719,6 +723,41 @@ static const struct qmp_phy_usb_cfg qmp_v3_usb3phy_cfg = {
.has_phy_dp_com_ctrl = true,
};
+static const struct qmp_phy_usb_cfg sc7180_usb3phy_cfg = {
+ .base = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+ .tx_tbl = qmp_v3_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+ .rx_tbl = qmp_v3_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+ .pcs_tbl = qmp_v3_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+ },
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+};
+
static int qcom_qmp_phy_com_init(struct qmp_usb_phy *qphy_usb)
{
struct qcom_qmp *qmp = qphy_usb->base.qmp;
@@ -1047,6 +1086,9 @@ static const struct of_device_id qcom_qmp_phy_usb_of_match_table[] = {
}, {
.compatible = "qcom,msm8998-qmp-usb3-phy",
.data = &msm8998_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc7180-qmp-usb3-phy",
+ .data = &sc7180_usb3phy_cfg,
}, {
.compatible = "qcom,sdm845-qmp-usb3-phy",
.data = &qmp_v3_usb3phy_cfg,
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 3a308fcbe198..b4b5a22877ff 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3323,9 +3323,6 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
{
- .compatible = "qcom,sc7180-qmp-usb3-phy",
- .data = &sc7180_usb3phy_cfg,
- }, {
.compatible = "qcom,sc7180-qmp-usb3-dp-phy",
/* It's a combo phy */
}, {
--
2.35.1
