Re: [Patch v9 3/3] phy: Add Qualcomm DWC3 HS/SS PHY driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Sat, Sep 13, 2014 at 12:16:01PM +0530, Kishon Vijay Abraham I wrote:
> On Saturday 13 September 2014 12:58 AM, Andy Gross wrote:
> > This patch adds a new driver for the Qualcomm USB 3.0 PHY that exists on some
> > Qualcomm platforms.  This driver uses the generic PHY framework and will
> > interact with the DWC3 controller.
> 
> Do you have dt documentation for this driver?

see patch 1

> > +static inline void qcom_dwc3_phy_write_readback(
> > +	struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset,
> > +	const u32 mask, u32 val)
> > +{
> > +	u32 write_val, tmp = readl(phy_dwc3->base + offset);
> > +
> > +	tmp &= ~mask;		/* retain other bits */
> > +	write_val = tmp | val;
> > +
> > +	writel(write_val, phy_dwc3->base + offset);
> > +
> > +	/* Read back to see if val was written */
> 
> Does it fail sometime? I'm not sure if this should be present in the
> driver since this looks more of a debug code.

this was mentioned before. Silicon bug.

> > +	writel_relaxed(data | SSUSB_CTRL_SS_PHY_RESET,
> > +		phy_dwc3->base + SSUSB_PHY_CTRL_REG);
> > +	usleep_range(2000, 2200);
> 
> use msleep here..

why ? usleep_range() gives the scheduler oportunity to group timers.

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux