This results in dts duplication, but per mutual agreement card detect pin configuration belongs to the board files. Move it from the SoC dtsi to the board DT files. Suggested-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- .../boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 16 ++++++++++++++++ arch/arm64/boot/dts/qcom/sdm630.dtsi | 12 ------------ .../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 16 ++++++++++++++++ 3 files changed, 32 insertions(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 00baacf28c63..ccde9951e4fb 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -549,6 +549,22 @@ vreg_l19a_3p3: l19 { }; }; +&sdc2_state_on { + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; +}; + &sdhc_1 { status = "okay"; supports-cqe; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index bcda3a1dd249..e6de49e14840 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -983,12 +983,6 @@ data { bias-pull-up; drive-strength = <10>; }; - - sd-cd { - pins = "gpio54"; - bias-pull-up; - drive-strength = <2>; - }; }; sdc2_state_off: sdc2-off { @@ -1009,12 +1003,6 @@ data { bias-pull-up; drive-strength = <2>; }; - - sd-cd { - pins = "gpio54"; - bias-disable; - drive-strength = <2>; - }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index 9280c1f0c334..2b1216502eb0 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -363,6 +363,22 @@ vreg_l19a_3p3: l19 { }; }; +&sdc2_state_on { + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; +}; + &sdhc_1 { status = "okay"; supports-cqe; -- 2.35.1