Re: [PATCH v2 3/3] PCI: qcom: Add system PM support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 18, 2022 at 03:23:58PM +0200, Christoph Hellwig wrote:
> On Wed, May 18, 2022 at 06:49:13PM +0530, Manivannan Sadhasivam wrote:
> > From: Prasad Malisetty <quic_pmaliset@xxxxxxxxxxx>
> > 
> > Add suspend and resume callbacks to handle system suspend and resume in
> > the Qcom PCIe controller driver. When the system suspends, PME turnoff
> > message will be sent to the device and the RC driver will wait for the
> > device to enter L23 Ready state. After that, the PHY will be powered down
> > and clocks/regulators will be disabled.
> 
> So what about just not doing this stupid power disabling to start
> with?  Unlike x86 where we do not have choice due to the BIOS, we
> apparently do here.  And disabling power is the wrong thing to do at
> least for SSDs as it massively increases the wear on the NAND.

That's the requirement the Chromebook based on SC7280 has. I will check
internally and get back.

Thanks,
Mani

-- 
மணிவண்ணன் சதாசிவம்



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux