The soc node expects all the nodes to have unit addresses. The
qup-opp-table does not have that which causes warnings:
arch/arm64/boot/dts/qcom/sm8250.dtsi:916.32-933.5:
Warning (simple_bus_reg): /soc@0/qup-opp-table:
missing or empty reg/ranges property
Move the qup-opp-table out of soc node to fix these warnings
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 38 ++++++++++++++--------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index dc2562070336..1c2d85abf72e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -702,6 +702,25 @@ CLUSTER_PD: cpu-cluster0 {
};
};
+ qup_opp_table: qup-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-120000000 {
+ opp-hz = /bits/ 64 <120000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -914,25 +933,6 @@ rng: rng@793000 {
clock-names = "core";
};
- qup_opp_table: qup-opp-table {
- compatible = "operating-points-v2";
-
- opp-50000000 {
- opp-hz = /bits/ 64 <50000000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-75000000 {
- opp-hz = /bits/ 64 <75000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-120000000 {
- opp-hz = /bits/ 64 <120000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
- };
-
gpi_dma2: dma-controller@800000 {
compatible = "qcom,sm8250-gpi-dma";
reg = <0 0x00800000 0 0x70000>;
--
2.34.1
