As Bjorn noted in [1], since the qmp phy driver doesn't use the 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties currently, let's remove them from the dts files as well. Otherwise, it leads to the following '$ make dtbs_check' warning(s): sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000: 'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+ If later on the driver support is added, we can add these properties back to the dts files. [1]. https://lore.kernel.org/linux-arm-msm/YmQhpsmiYJzR99LK@ripper/ Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Cc: Vinod Koul <vkoul@xxxxxxxxxx> Cc: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts | 2 -- arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 2 -- arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 2 -- 3 files changed, 6 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts index 9a6faa9393dc..9c4cfd995ff2 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts @@ -336,9 +336,7 @@ &ufs_mem_phy { status = "okay"; vdda-phy-supply = <&vreg_l5b_0p88>; - vdda-max-microamp = <91600>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 4e51a9d6af98..38ccd44620d0 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -418,8 +418,6 @@ &ufs_mem_phy { vdda-phy-supply = <&vreg_l5b_0p88>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-max-microamp = <173000>; - vdda-pll-max-microamp = <24900>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index 236e53974fdd..e58fc7399799 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -424,8 +424,6 @@ &ufs_mem_phy { vdda-phy-supply = <&vreg_l5b_0p88>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-max-microamp = <173000>; - vdda-pll-max-microamp = <24900>; }; &usb_1 { -- 2.35.3
