[PATCH v2 2/6] arm64: dts: qcom: sdm630: Fix 'interconnect-names' for sdhci nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since the Qualcomm sdhci-msm device-tree binding has been converted
to yaml format, 'make dtbs_check' reports issues with
inconsistent 'interconnect-names' used for sdhci nodes.

Fix the same.

Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index cadc920bcd9c..34b177f0ce87 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1289,6 +1289,7 @@ sdhc_2: mmc@c084000 {
 
 			interconnects = <&a2noc 3 &a2noc 10>,
 					<&gnoc 0 &cnoc 28>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
 			operating-points-v2 = <&sdhc2_opp_table>;
 
 			pinctrl-names = "default", "sleep";
@@ -1341,7 +1342,7 @@ sdhc_1: mmc@c0c4000 {
 
 			interconnects = <&a2noc 2 &a2noc 10>,
 					<&gnoc 0 &cnoc 27>;
-			interconnect-names = "sdhc1-ddr", "cpu-sdhc1";
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
 			operating-points-v2 = <&sdhc1_opp_table>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdc1_state_on>;
-- 
2.35.3




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux