Re: [PATCH 2/9] remoteproc: qcom: q6v5-mss: Add modem support on MSM8953

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed May 11, 2022 at 10:24 PM IST, Dmitry Baryshkov wrote:
> On 11/05/2022 19:15, Sireesh Kodali wrote:
> > The modem on the MSM8953 platform is similar to the modem on the MSM8996
> > platform in terms of set up. It differs primarily in the way it needs SCM
> > to bless the MPSS firmware region.
> > 
> > Signed-off-by: Sireesh Kodali <sireeshkodali1@xxxxxxxxx>
> > ---
> >   drivers/remoteproc/qcom_q6v5_mss.c | 64 +++++++++++++++++++++++++++---
> >   1 file changed, 58 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> > index af217de75e4d..a73fdcddeda4 100644
> > --- a/drivers/remoteproc/qcom_q6v5_mss.c
> > +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> > @@ -234,6 +234,7 @@ struct q6v5 {
> >   
> >   enum {
> >   	MSS_MSM8916,
> > +	MSS_MSM8953,
> >   	MSS_MSM8974,
> >   	MSS_MSM8996,
> >   	MSS_MSM8998,
> > @@ -687,12 +688,14 @@ static int q6v5proc_reset(struct q6v5 *qproc)
> >   		}
> >   		goto pbl_wait;
> >   	} else if (qproc->version == MSS_MSM8996 ||
> > -		   qproc->version == MSS_MSM8998) {
> > +		   qproc->version == MSS_MSM8998 ||
> > +		   qproc->version == MSS_MSM8953) {
> >   		int mem_pwr_ctl;
> >   
> >   		/* Override the ACC value if required */
> > -		writel(QDSP6SS_ACC_OVERRIDE_VAL,
> > -		       qproc->reg_base + QDSP6SS_STRAP_ACC);
> > +		if (qproc->version != MSS_MSM8953)
> > +			writel(QDSP6SS_ACC_OVERRIDE_VAL,
> > +					qproc->reg_base + QDSP6SS_STRAP_ACC);
> >   
> >   		/* Assert resets, stop core */
> >   		val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
> > @@ -734,7 +737,8 @@ static int q6v5proc_reset(struct q6v5 *qproc)
> >   		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> >   
> >   		/* Turn on L1, L2, ETB and JU memories 1 at a time */
> > -		if (qproc->version == MSS_MSM8996) {
> > +		if (qproc->version == MSS_MSM8996 ||
> > +			qproc->version == MSS_MSM8953) {
> >   			mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
> >   			i = 19;
> >   		} else {
> > @@ -1314,7 +1318,16 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >   			max_addr = ALIGN(phdr->p_paddr + phdr->p_memsz, SZ_4K);
> >   	}
> >   
> > -	/*
> > +	if (qproc->version == MSS_MSM8953) {
> > +		ret = qcom_scm_pas_mem_setup(5, qproc->mpss_phys, qproc->mpss_size);
> > +		if (ret) {
> > +			dev_err(qproc->dev,
> > +					"setting up mpss memory failed: %d\n", ret);
> > +			goto release_firmware;
> > +		}
> > +	}
> > +
> > +	/**
>
> Single star please

Will fix in v2

>
> >   	 * In case of a modem subsystem restart on secure devices, the modem
> >   	 * memory can be reclaimed only after MBA is loaded.
> >   	 */
> > @@ -1413,7 +1426,6 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >   			writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
> >   		}
> >   		writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
> > -
> >   		ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
> >   		if (ret < 0) {
> >   			dev_err(qproc->dev, "MPSS authentication failed: %d\n",
> > @@ -1422,6 +1434,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >   		}
> >   	}
> >   
> > +
>
> Unnecessary

Will fix in v2
>
>
> >   	/* Transfer ownership of modem ddr region to q6 */
> >   	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, true,
> >   				      qproc->mpss_phys, qproc->mpss_size);
> > @@ -2198,6 +2211,44 @@ static const struct rproc_hexagon_res msm8996_mss = {
> >   	.version = MSS_MSM8996,
> >   };
> >   
> > +static const struct rproc_hexagon_res msm8953_mss = {
> > +	.hexagon_mba_image = "mba.mbn",
> > +	.proxy_supply = (struct qcom_mss_reg_res[]) {
> > +		{
> > +			.supply = "pll",
> > +			.uA = 100000,
> > +		},
> > +		{}
> > +	},
> > +	.proxy_pd_names = (char*[]) {
> > +			"cx",
> > +			"mx",
> > +			NULL
> > +	},
> > +	.active_supply = (struct qcom_mss_reg_res[]) {
> > +		{
> > +			.supply = "mss",
> > +			.uV = 1050000,
> > +			.uA = 100000,
> > +		},
> > +		{}
> > +	},
> > +	.proxy_clk_names = (char*[]){
> > +			"xo",
> > +			NULL
> > +	},
> > +	.active_clk_names = (char*[]){
> > +			"iface",
> > +			"bus",
> > +			"mem",
> > +			NULL
> > +	},
> > +	.need_mem_protection = false,
> > +	.has_alt_reset = false,
> > +	.has_spare_reg = false,
>
>
> Please follow the custom  and define the rest of fields here.

Will fix in v2
>
> > +	.version = MSS_MSM8953,
> > +};
> > +
> >   static const struct rproc_hexagon_res msm8916_mss = {
> >   	.hexagon_mba_image = "mba.mbn",
> >   	.proxy_supply = (struct qcom_mss_reg_res[]) {
> > @@ -2301,6 +2352,7 @@ static const struct of_device_id q6v5_of_match[] = {
> >   	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
> >   	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
> >   	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
> > +	{ .compatible = "qcom,msm8953-mss-pil", .data = &msm8953_mss},
> >   	{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
> >   	{ .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss},
> >   	{ .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss},
>
>
> -- 
> With best wishes
> Dmitry

Thanks,
Sireesh




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux