On Wed, May 11, 2022 at 04:53:43PM +0300, Dmitry Baryshkov wrote: > On Wed, 11 May 2022 at 16:10, Lorenzo Pieralisi > <lorenzo.pieralisi@xxxxxxx> wrote: > > > > On Wed, May 11, 2022 at 01:13:28PM +0300, Dmitry Baryshkov wrote: > > > On Tue, 10 May 2022 at 19:50, Rob Herring <robh@xxxxxxxxxx> wrote: > > > > > > > > On Fri, May 06, 2022 at 06:20:59PM +0300, Dmitry Baryshkov wrote: > > > > > Convert pci/qcom,pcie schema to YAML description. The first patch > > > > > introduces several warnings which are fixed by the other patches in the > > > > > series. > > > > > > > > > > Note regarding the snps,dw-pcie compatibility. The Qualcomm PCIe > > > > > controller uses Synopsys PCIe IP core. However it is not just fused to > > > > > the address space. Accessing PCIe registers requires several clocks and > > > > > regulators to be powered up. Thus it can be assumed that the qcom,pcie > > > > > bindings are not fully compatible with the snps,dw-pcie schema. > > > > > > > > > > Changes since v5: > > > > > - s/stance/stanza (pointed out by Bjorn Helgaas) > > > > > > > > > > Changes since v4: > > > > > - Change subjects to follow convention (suggested by Bjorn Helgaas) > > > > > > > > > > Changes since v3: > > > > > - Rebase on linux-next to include sm8150 patches > > > > > > > > > > Changes since v2 (still kudos to Krzyshtof): > > > > > - Readded reg-names conversion patch > > > > > - Mention wake-gpio update in the commit message > > > > > - Remove extra quotes in the schema > > > > > > > > > > Changes since v1 (all kudos to Krzyshtof): > > > > > - Dropped the reg-names patch. It will be handled separately > > > > > - Squashed the snps,dw-pcie removal (from schema) into the first patch > > > > > - Replaced deprecated perst-gpio and wake-gpio with perst-gpios and > > > > > wake-gpios in the examples and in DT files > > > > > - Moved common clocks/clock-names, resets/reset-names and power-domains > > > > > properties to the top level of the schema, leaving only platform > > > > > specifics in the conditional branches > > > > > - Dropped iommu-map/iommu-map-mask for now > > > > > - Added (missed) interrupt-cells, clocks, clock-names, resets, > > > > > reset-names properties to the required list (resets/reset-names are > > > > > removed in the next patch, as they are not used on msm8996) > > > > > - Fixed IRQ flags in the examples > > > > > - Merged apq8064/ipq8064 into the single condition statement > > > > > - Added extra empty lines > > > > > > > > > > Dmitry Baryshkov (8): > > > > > dt-bindings: PCI: qcom: Convert to YAML > > > > > dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms > > > > > dt-bindings: PCI: qcom: Specify reg-names explicitly > > > > > dt-bindings: PCI: qcom: Add schema for sc7280 chipset > > > > > arm64: dts: qcom: stop using snps,dw-pcie falback > > > > > arm: dts: qcom: stop using snps,dw-pcie falback > > > > > arm: dts: qcom-*: replace deprecated perst-gpio with perst-gpios > > > > > arm64: dts: qcom: replace deprecated perst-gpio with perst-gpios > > > > > > > > > > .../devicetree/bindings/pci/qcom,pcie.txt | 398 ---------- > > > > > .../devicetree/bindings/pci/qcom,pcie.yaml | 714 ++++++++++++++++++ > > > > > > > > What tree do these apply to because they don't apply to rc1. I'm > > > > assuming the PCI tree and Lorenzo should take them. > > > > > > The series depends on the patch in Lorenzo's tree (sm8150 bindings), > > > so I'd assume it would be natural to merge these patches through his > > > tree too. > > > > I can take the DT bindings but the dts updates I'd prefer if they > > went via platform trees. Is that OK ? > > Yes, that's fine with me. I think Bjorn has sent 5.19 pull request > already, I'll track them getting merged into 5.19 or 5.20. I assume you meant BjornA sent a PR with patches [5-8] in it, correct ? I will only pull the DT bindings, patches [1-4], please let me know if that's what you expect. Lorenzo
