The following changes since commit 3123109284176b1532874591f7c81f3837bbdc17: Linux 5.18-rc1 (2022-04-03 14:08:21 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-for-5.19 for you to fetch changes up to 19794489fa2474a55c00848e00ca3d15ea01d36c: arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi (2022-05-05 22:42:27 -0500) ---------------------------------------------------------------- Qualcomm ARM64 DT updates for v5.19 This adds MDIO bus description on the IPQ6018 platform. On MSM8916 the BAM-DMUX WWAN network device is added and the Huawei Ascend G7 gains sound card definition and clarified installation instructions. MSM8992 and MSM8994 continues to be worked on, gaining multimedia clock controller, on-chip memory, watchdog and various cleanup changes. The Xiaomi Mi 4C gains CPU regulators and fixes to the framebuffer definition, while Huawei Nexus 6P gains eMMC support. On MSM8996 the modem and sensor remtoeprocs are added and enabled in the Dragonboard 820c and the Xiaomi devices. On MSM8998 a few newly added clocks related to the sensor subsystem bus are marked as protected by default and the OnePlus devices gains NFC. The SC7180 platform and devices thereon are further polished and limozeen moves to using edp-panel for EDID-based detection, over statically defined panels. On SC7280 GPI DMA, WiFi remoteproc and network device, LPASS audio clocks, resets for SDCC controllers and a new CRD revision are added. A supply glitch on the PCIe power and a current leak for Bluetooth during suspend are corrected. The Herobrine board gains eDP support and the IDP gains backlight. USB is marked wakeup capable. On SDM845 the IPA, WLED based backlight and second WiFi channel are enabled for Xiaomi Pocophone F1, the firmware name is modified to not conflict with other boards. On RB3 the CAN bus controller is added and the WiFi calibration variant is defined to allow adding the board's calibration information into linux-firmware. SM6350 gains I2C busses, UFS and WiFi support, and the numbering of uart9 is corrected. On SM7225 and the Fairphone 4 UFS, WiFi and haptics are enabled. On SM8150 PCIe, Ethernet and uSD card support is added, and enabled for the SA8155p ADP board. The PDC interrupt controller is also added and described as wakup interrupt parent for TLMM. Camera subsystem and control interface are defined for SM8250. On the Sony Xperia 1 II the audio amplifiers are enabled. On SM8350 GPI DMA engines are added and linked to the I2C and SPI serial engines. Surface Duo 2 gains battery charger support. On SM8450 the two PCIe controller/PHYs are enabled, GPI DMA and QUP serial engine instances are added. Remoteproc instances are enabled on SM8450 HDK. Last, but not least, a number of DeviceTree validation errors across various boards are corrected. ---------------------------------------------------------------- Akhil P Oommen (1): arm64: dts: qcom: sc7280: Support gpu speedbin Baruch Siach (1): arm64: dts: qcom: ipq6018: Add mdio bus description Bhupesh Sharma (14): arm64: dts: qcom: sm8150: Add pdc interrupt controller node arm64: dts: qcom: sm8150: Add ufs power-domain entries arm64: dts: qcom: sm8150: Add PCIe nodes arm64: dts: qcom: sa8155: Enable PCIe nodes arm64: dts: qcom: sm8150: Add support for SDC2 arm64: dts: qcom: sa8155p-adp: Add support for uSD card arm64: dts: qcom: sm8150: Add PDC as the interrupt parent for tlmm arm64: dts: qcom: msm8996-xiaomi: Drop max-microamp and vddp-ref-clk properties from QMP PHY arm64: dts: qcom: sc7280: Fix qmp phy node (use phy@ instead of lanes@) arm64: dts: qcom: sm8450: Fix qmp ufs phy node (use phy@ instead of lanes@) arm64: dts: qcom: ipq6018: Fix qmp usb3 phy node arm64: dts: qcom: sm8450: Fix qmp phy node (use phy@ instead of lanes@) arm64: dts: qcom: sm8150: Fix iommu sid value for SDC2 controller arm64: dts: qcom: sa8155p-adp: Disable multiple Tx and Rx queues for ethernet IP Bjorn Andersson (5): Merge branch '20220223172248.18877-1-tdas@xxxxxxxxxxxxxx' into arm64-for-5.19 Merge branch '20220411072156.24451-2-michael.srba@xxxxxxxxx' into arm64-for-5.19 arm64: dts: qcom: sm8350: Define GPI DMA engines arm64: dts: qcom: sm8350: Add GENI I2C/SPI DMA channels arm64: dts: qcom: sm8350-hdk: Enable &gpi_dma1 Bryan O'Donoghue (3): arm64: dts: qcom: sm8250: Add camcc DT node arm64: dts: qcom: sm8250: camss: Add CAMSS block definition arm64: dts: qcom: sm8250: camss: Add CCI definitions Dmitry Baryshkov (25): arm64: dts: qcom: sdm845-db845c: add wifi variant property arm64: dts: qcom: apq8096-db820c: enable MSS node arm64: dts: qcom: sdm845: remove snps,dw-pcie compatibles arm64: dts: qcom: msm8996: remove snps,dw-pcie compatibles arm64: dts: qcom: sm8450-hdk: Enable remoteproc instances arm64: dts: qcom: sm8450: add fastrpc nodes arm64: dts: qcom: sdm845: correct dynamic power coefficients arm64: dts: qcom: pm8350: add temp sensor and thermal zone config arm64: dts: qcom: pm8350b: add temp sensor and thermal zone config arm64: dts: qcom: pmr735b: add temp sensor and thermal zone config arm64: dts: qcom: pm8350c: stop depending on thermal_zones label arm64: dts: qcom: pmr735a: stop depending on thermal_zones label arm64: dts: qcom: add pm8450 support arm64: dts: qcom: sm8450: add PCIe0 PHY node arm64: dts: qcom: sm8450: add PCIe0 RC device arm64: dts: qcom: sm8450: add PCIe1 PHY node arm64: dts: qcom: sm8450: add PCIe1 root device arm64: dts: qcom: sm8450-qrd: enable PCIe0 PHY device arm64: dts: qcom: sm8450-qrd: enable PCIe0 host arm64: dts: qcom: sm8450-hdk: add pcie nodes arm64: dts: qcom: msm8996: Drop flags for mdss irqs arm64: dts: qcom: sdm630: Drop flags for mdss irqs arm64: dts: qcom: sdm660: Drop flags for mdss irqs arm64: dts: qcom: sdm845: Drop flags for mdss irqs arm64: dts: qcom: sm8250: Drop flags for mdss irqs Douglas Anderson (4): arm64: dts: qcom: sc7280-herobrine: Fix PCIe regulator glitch at bootup arm64: dts: qcom: sc7280: Delete herobrine-r0 arm64: dts: qcom: sc7280-herobrine: Audio codec wants 1.8V, not 1.62V arm64: dts: qcom: sc7280: eDP for herobrine boards Ivy Jian (1): arm64: dts: qcom: switch panel compatible to "edp-panel" for limozeen Jami Kettunen (1): arm64: dts: qcom: msm8998-oneplus-common: Add NFC Joel Selvaraj (5): arm64: dts: qcom: sdm845-xiaomi-beryllium: change firmware path and use mbn format arm64: dts: qcom: sdm845-xiaomi-beryllium: enable qcom ipa driver arm64: dts: qcom: sdm845-xiaomi-beryllium: fix typo in panel's vddio-supply property arm64: dts: qcom: sdm845-xiaomi-beryllium: enable second wifi channel arm64: dts: qcom: sdm845-xiaomi-beryllium: enable qcom wled backlight and link to panel Katherine Perez (1): arm64: dts: qcom: sm8350-duo2: enable battery charger Kathiravan T (1): arm64: dts: qcom: ipq8074: fix the sleep clock frequency Konrad Dybcio (16): arm64: dts: qcom: sm8250-edo: Add dual CS35L41 amps arm64: dts: qcom: msm8994: Fix sleep clock name arm64: dts: qcom: msm8992-libra: Add CPU regulators arm64: dts: qcom: msm8992-libra: Temporarily restrict CPU count to 1 arm64: dts: qcom: msm8992-libra: Remove superfluous status = "okay" arm64: dts: qcom: msm8994: Add MMCC node arm64: dts: qcom: msm8992: Use the correct GCC compatible arm64: dts: qcom: msm8992: Use the correct MMCC compatible arm64: dts: qcom: msm8994: Fix the cont_splash_mem address arm64: dts: qcom: msm8992-libra: Fix up the framebuffer arm64: dts: qcom: msm8994-kitakami: Disable a mistakengly enabled I2C host arm64: dts: qcom: msm8994-kitakami: Update regulator configuration arm64: dts: qcom: msm8994: Add OCMEM node arm64: dts: qcom: msm8994: Fix BLSP[12]_DMA channels count arm64: dts: qcom: msm8994: Add watchdog timer node arm64: dts: qcom: msm8994: Add mmc aliases Krzysztof Kozlowski (13): arm64: dts: qcom: align SPI NOR node name with dtschema arm64: dts: qcom: msm8996: drop unsupported UFS vddp-ref-clk-max-microamp arm64: dts: qcom: msm8996: correct UFS compatible arm64: dts: qcom: sm8350: drop duplicated ref_clk in UFS arm64: dts: qcom: msm8916: rename WCNSS child name to bluetooth arm64: dts: qcom: align dmas in I2C/SPI/UART with DT schema arm64: dts: qcom: align clocks in I2C/SPI with DT schema arm64: dts: qcom: msm8953: do not use underscore in node name arm64: dts: qcom: msm8994: remove SMD qcom,local-pid property arm64: dts: qcom: add RPM clock controller fallback compatible arm64: dts: qcom: do not use underscore in BCM node name arm64: dts: qcom: msm8994: override nodes by label arm64: dts: qcom: msm8996: override nodes by label Kuldeep Singh (1): arm64: dts: qcom: msm8996: User generic node name for DMA Luca Weiss (7): arm64: dts: qcom: sm6350: Fix naming of uart9 arm64: dts: qcom: sm6350: Add I2C busses arm64: dts: qcom: sm7225-fairphone-fp4: Add AW8695 haptics arm64: dts: qcom: sm6350: Add UFS nodes arm64: dts: qcom: sm7225-fairphone-fp4: Enable UFS arm64: dts: qcom: sm6350: Add wifi node arm64: dts: qcom: sm7225-fairphone-fp4: Enable wifi Manikanta Pubbisetty (1): arm64: dts: qcom: sc7280: Add WCN6750 WiFi node Matthias Kaehlcke (7): arm64: dts: qcom: sc7280: Add SAR sensors for herobrine arm64: dts: qcom: sc7280: Add device tree for herobrine villager arm64: dts: qcom: sc7280: Rename crd to crd-r3 arm64: dts: qcom: sc7280: Add 'piglin' to the crd-r3 compatible strings arm64: dts: qcom: sc7280: herobrine: disable some regulators by default arm64: dts: qcom: sc7280: Add CRD rev5 arm64: dts: qcom: sc7280: Add SAR sensors to herobrine crd Michael Srba (2): dt-bindings: clock: gcc-msm8998: Add definitions of SSC-related clocks arm64: dts: qcom: msm8998: reserve potentially inaccessible clocks Petr Vorel (1): arm64: dts: qcom: msm8994-huawei-angler: Add sdhc1 definition Rakesh Pillai (1): arm64: dts: qcom: sc7280: Add WPSS remoteproc node Rob Herring (1): arm64: dts: qcom: sdm845: shift6mq: Fix boolean properties with values Sandeep Maheswaram (1): arm64: dts: qcom: sc7280: Add wakeup-source property for USB node Sankeerth Billakanti (1): arm64: dts: qcom: sc7280: rename edp_out label to mdss_edp_out Satya Priya (2): arm64: dts: qcom: pm8350c: Add pwm support arm64: dts: qcom: Enable pm8350c pwm for sc7280-idp2 Shaik Sajida Bhanu (1): arm64: dts: qcom: sc7280: Add reset entries for SDCC controllers Souradeep Chowdhury (1): arm64: dts: qcom: sc7280: Set the default dr_mode for usb2 Stephan Gerhold (3): arm64: dts: qcom: msm8916: Add BAM-DMUX for WWAN network interfaces arm64: dts: qcom: msm8916-huawei-g7: Clarify installation instructions arm64: dts: qcom: msm8916-huawei-g7: Add sound card Stephen Boyd (7): arm64: dts: qcom: sc7280: Fix sar1_irq_odl node name arm64: dts: qcom: sc7280-herobrine: Drop outputs on fpmcu pins arm64: dts: qcom: sc7180-trogdor: Simplify SAR sensor enabling arm64: dts: qcom: sc7180: Remove ipa interconnect node arm64: dts: qcom: sc7180-trogdor: Simplify trackpad enabling arm64: dts: qcom: sc7180-trogdor: Simplify spi0/spi6 labeling arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi Taniya Das (2): dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280 arm64: dts: qcom: sc7280: Add lpasscore & lpassaudio clock controllers Vijaya Krishna Nivarthi (2): arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for bluetooth arm64: dts: qcom: sc7280-qcard: Configure CTS pin to bias-bus-hold for bluetooth Vinod Koul (14): arm64: dts: qcom: sm8150: add ethernet node arm64: dts: qcom: sa8155p-adp: Enable ethernet node arm64: dts: qcom: sm8450: Add gpi_dma nodes arm64: dts: qcom: sm8450: Fix missing iommus for qup arm64: dts: qcom: sm8450: Add qup nodes for qup0 arm64: dts: qcom: sm8450: Add qup nodes for qup1 arm64: dts: qcom: sm8450: Add qup nodes for qup2 arm64: dts: qcom: sm8450: Fix missing iommus for qup1 arm64: dts: qcom: sm8450-qrd: Enable spi and i2c nodes arm64: dts: qcom: qrb5165-rb5: Fix can-clock node name arm64: dts: qcom: db845c: Add support for MCP2517FD arm64: dts: qcom: sc7280: Add GPI DMAengines arm64: dts: qcom: sc7280: Add GENI I2C/SPI DMA channels arm64: dts: qcom: sc7280-idp: Enable GPI DMAs Vladimir Zapolskiy (2): arm64: dts: qcom: sm8450: Add thermal sensor controllers arm64: dts: qcom: sm8450: Add thermal zones Yassine Oudjana (4): arm64: dts: qcom: msm8996: Revamp reserved memory arm64: dts: qcom: msm8996: Unify smp2p naming arm64: dts: qcom: msm8996: Add MSS and SLPI arm64: dts: qcom: msm8996-xiaomi-*: Enable MSS and SLPI .../bindings/clock/qcom,sc7280-lpasscorecc.yaml | 172 + arch/arm64/boot/dts/qcom/Makefile | 5 +- arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 6 + arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 2 +- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 34 +- arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 +- arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 2 +- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 42 +- arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 59 +- arch/arm64/boot/dts/qcom/msm8916.dtsi | 102 +- arch/arm64/boot/dts/qcom/msm8953.dtsi | 52 +- arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts | 36 +- arch/arm64/boot/dts/qcom/msm8992.dtsi | 24 +- .../dts/qcom/msm8994-huawei-angler-rev-101.dts | 21 +- .../dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 89 +- arch/arm64/boot/dts/qcom/msm8994.dtsi | 126 +- arch/arm64/boot/dts/qcom/msm8996-mtp.dts | 8 +- .../boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 18 +- .../arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 36 +- arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 9 + .../arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts | 9 + arch/arm64/boot/dts/qcom/msm8996.dtsi | 250 +- .../boot/dts/qcom/msm8998-oneplus-common.dtsi | 31 + arch/arm64/boot/dts/qcom/msm8998.dtsi | 15 + arch/arm64/boot/dts/qcom/pm8350.dtsi | 31 + arch/arm64/boot/dts/qcom/pm8350b.dtsi | 31 + arch/arm64/boot/dts/qcom/pm8350c.dtsi | 41 +- arch/arm64/boot/dts/qcom/pm8450.dtsi | 59 + arch/arm64/boot/dts/qcom/pmr735a.dtsi | 32 +- arch/arm64/boot/dts/qcom/pmr735b.dtsi | 31 + arch/arm64/boot/dts/qcom/qcs404.dtsi | 94 +- arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 2 +- arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 193 + .../arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 11 +- .../boot/dts/qcom/sc7180-trogdor-homestar-r2.dts | 2 +- .../boot/dts/qcom/sc7180-trogdor-homestar-r3.dts | 2 +- .../boot/dts/qcom/sc7180-trogdor-homestar-r4.dts | 2 +- .../boot/dts/qcom/sc7180-trogdor-homestar.dtsi | 7 - .../qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts | 2 +- .../qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts | 4 +- .../dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts | 2 +- .../dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts | 2 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 2 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts | 4 - .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 2 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts | 2 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts | 6 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 2 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts | 2 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts | 6 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r9.dts | 2 +- arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 7 +- .../arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 9 +- arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 9 +- arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 9 +- arch/arm64/boot/dts/qcom/sc7180.dtsi | 9 +- .../dts/qcom/{sc7280-crd.dts => sc7280-crd-r3.dts} | 7 +- arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 365 ++ .../dts/qcom/sc7280-herobrine-herobrine-r0.dts | 1352 ------- .../dts/qcom/sc7280-herobrine-herobrine-r1.dts | 38 + .../boot/dts/qcom/sc7280-herobrine-villager-r0.dts | 304 ++ arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 93 +- arch/arm64/boot/dts/qcom/sc7280-idp.dts | 2 +- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 36 +- arch/arm64/boot/dts/qcom/sc7280-idp2.dts | 4 + arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +- arch/arm64/boot/dts/qcom/sc7280.dtsi | 336 +- arch/arm64/boot/dts/qcom/sdm630.dtsi | 4 +- arch/arm64/boot/dts/qcom/sdm660.dtsi | 2 +- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 33 + arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 2 +- .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 35 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 34 +- arch/arm64/boot/dts/qcom/sm6350.dtsi | 241 +- arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 61 +- arch/arm64/boot/dts/qcom/sm8150.dtsi | 330 +- .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 30 +- arch/arm64/boot/dts/qcom/sm8250.dtsi | 339 +- arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 4 + .../dts/qcom/sm8350-microsoft-surface-duo2.dts | 12 + arch/arm64/boot/dts/qcom/sm8350.dtsi | 186 +- arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 41 + arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 34 + arch/arm64/boot/dts/qcom/sm8450.dtsi | 3750 ++++++++++++++++---- include/dt-bindings/clock/qcom,gcc-msm8998.h | 4 + .../dt-bindings/clock/qcom,lpassaudiocc-sc7280.h | 43 + .../dt-bindings/clock/qcom,lpasscorecc-sc7280.h | 26 + 87 files changed, 7104 insertions(+), 2486 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml create mode 100644 arch/arm64/boot/dts/qcom/pm8450.dtsi rename arch/arm64/boot/dts/qcom/{sc7280-crd.dts => sc7280-crd-r3.dts} (88%) create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts delete mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts create mode 100644 include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h create mode 100644 include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h
