Re: [PATCH v1 1/5] arm64: dts: qcom: sdm660: disable dsi1/dsi1_phy by default

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2022-05-04 01:09:23, Dmitry Baryshkov wrote:
> Follow the typical practice and keep DSI1/DSI1 PHY disabled by default.
> They should be enabled in the board DT files. No existing boards use
> them at this moment.

This practice also seems to be applied to dsi0/dsi0_phy across other
boards.  Should this also be applied to sdm630.dtsi's dsi0/dsi0_phy
nodes, and them subsequently re-enabled in sdm630-sony-xperia-nile.dtsi?

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>

- Marijn
> ---
>  arch/arm64/boot/dts/qcom/sdm660.dtsi | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
> index eccf6fde16b4..023b0ac4118c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
> @@ -192,6 +192,8 @@ dsi1: dsi@c996000 {
>  		phys = <&dsi1_phy>;
>  		phy-names = "dsi";
>  
> +		status = "disabled";
> +
>  		ports {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> @@ -225,6 +227,7 @@ dsi1_phy: dsi-phy@c996400 {
>  
>  		clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
>  		clock-names = "iface", "ref";
> +		status = "disabled";
>  	};
>  };
>  
> -- 
> 2.35.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux