[PATCH v2] arm64: dts: qcom: sm8450: add uart20 node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add device tree node for uart20, which is typically used for Bluetooth attachment.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
Changes since v1:
 - Fixed the order of dts nodes
 - removed extra mux level from the pinctrl definition.
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 7f52c3cfdfb7..9c69856307c8 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -976,6 +976,19 @@ i2c20: i2c@894000 {
 				status = "disabled";
 			};
 
+			uart20: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart20_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			spi20: spi@894000 {
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00894000 0 0x4000>;
@@ -2738,6 +2751,12 @@ qup_uart7_tx: qup-uart7-tx {
 				drive-strength = <2>;
 				bias-disable;
 			};
+
+			qup_uart20_default: qup-uart20-default {
+				pins = "gpio76", "gpio77", "gpio78", "gpio79";
+				function = "qup20";
+			};
+
 		};
 
 		apps_smmu: iommu@15000000 {
-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux