Enable QPIC NAND devicetree node for Qualcomm SDX65-MTP board.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Signed-off-by: Kaushal Kumar <quic_kaushalk@xxxxxxxxxxx>
---
arch/arm/boot/dts/qcom-sdx65-mtp.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index e9c8df9..e747ec0 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -249,6 +249,21 @@
status = "okay";
};
+&qpic_nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ /* ico and efs2 partitions are secured */
+ secure-regions = /bits/ 64 <0x500000 0x500000
+ 0xa00000 0xb00000>;
+ };
+};
+
&usb {
status = "okay";
};
--
2.7.4
