[PATCH v2 4/4] ARM: dts: qcom: sdx65-mtp: Enable QPIC NAND support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable QPIC NAND devicetree node for Qualcomm SDX65-MTP board.

Signed-off-by: Kaushal Kumar <quic_kaushalk@xxxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-sdx65-mtp.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 153ad2a..b0027c1 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -249,6 +249,21 @@
 	status = "ok";
 };
 
+&qpic_nand {
+	status = "ok";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* ico and efs2 partitions are secured */
+		secure-regions = /bits/ 64 <0x500000 0x500000
+					    0xa00000 0xb00000>;
+	};
+};
+
 &usb {
 	status = "okay";
 };
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux