[PATCH v2 3/4] ARM: dts: qcom: sdx65: Add USB3 and PHY support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and
SNPS HS PHY on SDX65.

Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 83 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 83 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index d989837..a64be20 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -126,6 +126,7 @@
 			reg = <0x00100000 0x001f7400>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			#power-domain-cells = <1>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
@@ -139,6 +140,45 @@
 			status = "disabled";
 		};
 
+		usb_hsphy: phy@ff4000 {
+			compatible = "qcom,usb-snps-hs-7nm-phy";
+			reg = <0xff4000 0x120>;
+			#phy-cells = <0>;
+			status = "disabled";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_BCR>;
+		};
+
+		usb_qmpphy: phy@ff6000 {
+			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
+			reg = <0x00ff6000 0x1c8>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_EN>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
+				 <&gcc GCC_USB3_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			usb_ssphy: phy@ff6200 {
+				reg = <0x00ff6e00 0x160>,
+				      <0x00ff7000 0x1ec>,
+				      <0x00ff6200 0x1e00>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
 		system_noc: interconnect@1620000 {
 			compatible = "qcom,sdx65-system-noc";
 			reg = <0x1620000 0x31200>;
@@ -178,6 +218,49 @@
 			status = "disabled";
 		};
 
+		usb: usb@a6f8800 {
+			compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
+			reg = <0x0a6f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+					"sleep";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 19 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 18 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+					  "ss_phy_irq", "dm_hs_phy_irq";
+
+			power-domains = <&gcc USB30_GDSC>;
+
+			resets = <&gcc GCC_USB30_BCR>;
+
+			usb_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0a600000 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x1a0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
 		spmi_bus: qcom,spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0xd00>,
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux