Re: [PATCH 1/3] dt-bindings: display: msm: Add binding for MSM8996 DPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 30/04/2022 22:33, Dmitry Baryshkov wrote:
On 30/04/2022 19:15, Konrad Dybcio wrote:
Add yaml binding for MSM8996 DPU.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
  .../bindings/display/msm/dpu-msm8996.yaml     | 221 ++++++++++++++++++
  1 file changed, 221 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-msm8996.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8996.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8996.yaml
new file mode 100644
index 000000000000..10b02423224d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8996.yaml
@@ -0,0 +1,221 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-msm8996.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for MSM8996 target
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that
+  encapsulates sub-blocks like DPU display controller, DSI interfaces, etc.
+  Device tree bindings of MDSS and DPU are mentioned for MSM8996 target.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8996-mdss

With the unified MDSS driver there is no need to describe a separate mdss bindings. Let's skip this part for now.

+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    items:
+      - description: Phandle to mdp_smmu node with SID mask for Hard-Fail port0
+
+  ranges: true
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    description: Node containing the properties of DPU.
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,msm8996-dpu

Okay. So, this is the most interesting part. Unlike MSM8998, which is supported in the mdp5 driver, but was not used in the upstream DTS files, for the MSM8996 the MDP5 part is described, used and widely tested. And, unfortunately, the bindings use solely the generic "qcom,mdp5" compat.

I would suggest the following plan:
- Define a binding using both "qcom,msm8996-dpu" and "qcom,mdp5" strings. Make sure that it is fully backwards-compatible with older dts.

- Update msm8996.dtsi to follow new binding.

- Let's have a Kconfig flip switch selecting which driver to be used for 8996/8998.

Rob suggested a modparam here.


--
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux