Re: [PATCH v14 1/2] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2022-03-03 13:42:59, Bjorn Andersson wrote:
> This adds the binding document describing the three hardware blocks
> related to the Light Pulse Generator found in a wide range of Qualcomm
> PMICs.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

Apart the nits below:

Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> ---
> 
> Changes since v13:
> - None
> 
> Changes since v12:
> - None
> 
>  .../bindings/leds/leds-qcom-lpg.yaml          | 173 ++++++++++++++++++
>  1 file changed, 173 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
> new file mode 100644
> index 000000000000..336bd8e10efd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
> @@ -0,0 +1,173 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Light Pulse Generator
> +
> +maintainers:
> +  - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> +
> +description: >
> +  The Qualcomm Light Pulse Generator consists of three different hardware blocks;
> +  a ramp generator with lookup table, the light pulse generator and a three
> +  channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,pm8150b-lpg
> +      - qcom,pm8150l-lpg
> +      - qcom,pm8916-pwm
> +      - qcom,pm8941-lpg
> +      - qcom,pm8994-lpg
> +      - qcom,pmc8180c-lpg
> +      - qcom,pmi8994-lpg
> +      - qcom,pmi8998-lpg
> +
> +  "#pwm-cells":
> +    const: 2
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  qcom,power-source:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      power-source used to drive the output, as defined in the datasheet.
> +      Should be specified if the TRILED block is present
> +    enum: [0, 1, 3]
> +
> +  qcom,dtest:
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +    description: >
> +      A list of integer pairs, where each pair represent the dtest line the
> +      particular channel should be connected to and the flags denoting how the
> +      value should be outputed, as defined in the datasheet. The number of

Nit: I think outputed is with double-t, though just using "output" here
should work as well.

> +      pairs should be the same as the number of channels.
> +    items:
> +      items:
> +        - description: dtest line to attach
> +        - description: flags for the attachment
> +
> +  multi-led:

As mentioned on IRC, doesn't this need an @[0-9a-f] designator, as
specified in leds-class-multicolor.yaml and to match `#address-cells` on
this level?  Same for the examples.

> +    type: object
> +    $ref: leds-class-multicolor.yaml#
> +    properties:
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +    patternProperties:
> +      "^led@[0-9a-f]$":
> +        type: object
> +        $ref: common.yaml#

I'm not familiar enough with DT bindings - doesn't this need the
requirements for `reg` just like the identical patternProperties for
led@ below?

> +
> +patternProperties:
> +  "^led@[0-9a-f]$":
> +    type: object
> +    $ref: common.yaml#
> +
> +    properties:
> +      reg: true
> +
> +    required:
> +      - reg
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/leds/common.h>
> +
> +    led-controller {
> +      compatible = "qcom,pmi8994-lpg";
> +
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      qcom,power-source = <1>;
> +
> +      qcom,dtest = <0 0>,
> +                   <0 0>,
> +                   <0 0>,
> +                   <4 1>;
> +
> +      led@1 {
> +        reg = <1>;
> +        color = <LED_COLOR_ID_GREEN>;
> +        function = LED_FUNCTION_INDICATOR;
> +        function-enumerator = <1>;
> +      };
> +
> +      led@2 {
> +        reg = <2>;
> +        color = <LED_COLOR_ID_GREEN>;
> +        function = LED_FUNCTION_INDICATOR;
> +        function-enumerator = <0>;
> +        default-state = "on";
> +      };
> +
> +      led@3 {
> +        reg = <3>;
> +        color = <LED_COLOR_ID_GREEN>;
> +        function = LED_FUNCTION_INDICATOR;
> +        function-enumerator = <2>;
> +      };
> +
> +      led@4 {
> +        reg = <4>;
> +        color = <LED_COLOR_ID_GREEN>;
> +        function = LED_FUNCTION_INDICATOR;
> +        function-enumerator = <3>;
> +      };
> +    };
> +  - |
> +    #include <dt-bindings/leds/common.h>
> +
> +    led-controller {
> +      compatible = "qcom,pmi8994-lpg";
> +
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      qcom,power-source = <1>;
> +
> +      multi-led {
> +        color = <LED_COLOR_ID_RGB>;
> +        function = LED_FUNCTION_STATUS;
> +
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        led@1 {
> +          reg = <1>;
> +          color = <LED_COLOR_ID_RED>;
> +        };
> +
> +        led@2 {
> +          reg = <2>;
> +          color = <LED_COLOR_ID_GREEN>;
> +        };
> +
> +        led@3 {
> +          reg = <3>;
> +          color = <LED_COLOR_ID_BLUE>;
> +        };
> +      };
> +    };
> +  - |
> +    pwm-controller {
> +      compatible = "qcom,pm8916-pwm";
> +      #pwm-cells = <2>;
> +    };
> +...
> -- 
> 2.33.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux