[PATCH 1/3] clk: qcom: gcc-msm8976: Set floor ops for SDCC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Just like in case of other SoCs change SDCC1/SDCC2 ops to floor to avoid overclocking controller.
This commit only sets SDCC1/SDCC2 which are used for EMMC/SDCARD.
It leaves SDCC3 because on this platform it's mostly used for WIFI/BT chips like on Sony Loire family devices.

Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>
---
 drivers/clk/qcom/gcc-msm8976.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/gcc-msm8976.c b/drivers/clk/qcom/gcc-msm8976.c
index a8b15814933e..5781a7bcecc6 100644
--- a/drivers/clk/qcom/gcc-msm8976.c
+++ b/drivers/clk/qcom/gcc-msm8976.c
@@ -1486,7 +1486,7 @@ static const struct clk_init_data sdcc1_apps_clk_src_8976v1_1_init = {
 	.name = "sdcc1_apps_clk_src",
 	.parent_data = gcc_parent_data_v1_1,
 	.num_parents = ARRAY_SIZE(gcc_parent_data_v1_1),
-	.ops = &clk_rcg2_ops,
+	.ops = &clk_rcg2_floor_ops,
 };
 
 static struct clk_rcg2 sdcc1_apps_clk_src = {
@@ -1499,7 +1499,7 @@ static struct clk_rcg2 sdcc1_apps_clk_src = {
 		.name = "sdcc1_apps_clk_src",
 		.parent_data = gcc_parent_data_1,
 		.num_parents = ARRAY_SIZE(gcc_parent_data_1),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 
@@ -1547,7 +1547,7 @@ static struct clk_rcg2 sdcc2_apps_clk_src = {
 		.name = "sdcc2_apps_clk_src",
 		.parent_data = gcc_parent_data_4_8,
 		.num_parents = ARRAY_SIZE(gcc_parent_data_4_8),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux