Re: [PATCH v9 3/4] drm/msm/dp: wait for hpd high before aux transaction

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Sankeerth Billakanti (2022-04-22 02:11:05)
> The source device should ensure the sink is ready before proceeding to
> read the sink capability or perform any aux transactions. The sink
> will indicate its readiness by asserting the HPD line. The controller
> driver needs to wait for the hpd line to be asserted by the sink before
> it performs any aux transactions.
>
> The eDP sink is assumed to be always connected. It needs power from the
> source and its HPD line will be asserted only after the panel is powered
> on. The panel power will be enabled from the panel-edp driver and only
> after that, the hpd line will be asserted.
>
> Whereas for DP, the sink can be hotplugged and unplugged anytime. The hpd
> line gets asserted to indicate the sink is connected and ready. Hence
> there is no need to wait for the hpd line to be asserted for a DP sink.
>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@xxxxxxxxxxx>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---

Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux