[PATCH v6] dt-bindings: power: reset: qcom-pon: update "reg" property details

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: David Collins <collinsd@xxxxxxxxxxx>

Update the description of "reg" property to add the PON_PBS base
address along with PON_HLOS base address.  Also add "reg-names"
property description.

Signed-off-by: David Collins <quic_collinsd@xxxxxxxxxxx>
Signed-off-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
---
 .../bindings/power/reset/qcom,pon.yaml | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
index 353f155d..65ec8197 100644
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -26,7 +26,24 @@ properties:
       - qcom,pm8998-pon
 
   reg:
-    maxItems: 1
+    description: |
+      Specifies the SPMI base address for the PON (power-on) peripheral.  For
+      PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS
+      (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS
+      peripherals.  In that case, the PON_PBS address needs to be specified to
+      facilitate software debouncing on some PMICs.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    description: |
+      For PON GEN1 and GEN2, it should be "pon".  For PON GEN3 it should include
+      "pon_hlos" and optionally "pon_pbs".
+    minItems: 1
+    items:
+      - const: pon_hlos
+      - const: pon_pbs
+      - const: pon
 
   pwrkey:
     type: object
-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux