Enable rx, tx and va macro codecs and soundwire nodes on revision 3,
4 (aka CRD 1.0 and 2.0) and IDP boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 35 ++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 2f863c0..6cb5fc4 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -238,6 +238,19 @@
modem-init;
};
+&lpass_rx_macro {
+ status = "okay";
+};
+
+&lpass_tx_macro {
+ status = "okay";
+};
+
+&lpass_va_macro {
+ status = "okay";
+ vdd-micb-supply = <&vreg_bob>;
+};
+
&pcie1 {
status = "okay";
perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
@@ -298,6 +311,28 @@
cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
};
+&swr0 {
+ status = "okay";
+
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ #sound-dai-cells = <1>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ #sound-dai-cells = <1>;
+ qcom,tx-port-mapping = <1 2 3 4>;
+ };
+};
+
&uart5 {
compatible = "qcom,geni-debug-uart";
status = "okay";
--
2.7.4
