Re: [PATCH RFC 2/5] arm64: dts: qcom: sc7280: move pipe mux handling to phy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 21, 2022 at 01:59:04PM +0300, Dmitry Baryshkov wrote:
> On 21/04/2022 13:20, Johan Hovold wrote:
> > The QMP PHY pipe clock remuxing is part of the PHY, which is both the
> > producer and the consumer of the pipe clock.
> > 
> > Update the PCIe controller and PHY node to reflect the new binding.
> > 
> > Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/qcom/sc7280.dtsi | 18 ++++++------------
> >   1 file changed, 6 insertions(+), 12 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > index c07765df9303..b3a9630262dc 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > @@ -1837,11 +1837,7 @@ pcie1: pci@1c08000 {
> >   					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
> >   					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
> >   
> > -			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
> > -				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
> > -				 <&pcie1_lane 0>,
> > -				 <&rpmhcc RPMH_CXO_CLK>,
> > -				 <&gcc GCC_PCIE_1_AUX_CLK>,
> > +			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
> >   				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
> >   				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
> >   				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
> > @@ -1849,11 +1845,7 @@ pcie1: pci@1c08000 {
> >   				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
> >   				 <&gcc GCC_DDRSS_PCIE_SF_CLK>;
> >   
> > -			clock-names = "pipe",
> > -				      "pipe_mux",
> > -				      "phy_pipe",
> > -				      "ref",
> > -				      "aux",
> > +			clock-names = "aux",
> >   				      "cfg",
> >   				      "bus_master",
> >   				      "bus_slave",
> > @@ -1910,8 +1902,10 @@ pcie1_lane: lanes@1c0e200 {
> >   				      <0 0x01c0e600 0 0x170>,
> >   				      <0 0x01c0e800 0 0x200>,
> >   				      <0 0x01c0ee00 0 0xf4>;
> > -				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
> > -				clock-names = "pipe0";
> > +				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
> > +					 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
> > +					 <&rpmhcc RPMH_CXO_CLK>;
> > +				clock-names = "pipe0", "mux", "ref";
> 
> This will not be compatible with earlier DTB files, which was a problem 
> up to now.

That depends. The above wasn't added until 5.16 so we may still be able
to fix it.

The NAK you got from Rob earlier was when you removed clocks that have
been in the devicetree for several years:

	https://lore.kernel.org/all/YgQ+tGhLqwUCsTUo@xxxxxxxxxxxxxxxxxx/

and would still be needed by older kernels.

Worst case, we need to keep both sets for sc7280 (i.e. like we need to
do with the pipe clocks that have been around for years).

Johan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux