Configure the touchscreen found on the new display module of the FP2.
To add some detail, FP2 has two different screen/touchscreen variants
("display module"), the old module has Synaptics touchscreen, the new
one this Ilitek touchscreen.
We're only supporting the new display module for now.
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
.../boot/dts/qcom-msm8974pro-fairphone-fp2.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
index 96427d75ea82..8f07d8e363aa 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
@@ -57,6 +57,21 @@ vibrator {
};
};
+&blsp1_i2c2 {
+ status = "okay";
+
+ touchscreen@41 {
+ compatible = "ilitek,ili2120";
+ reg = <0x41>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
+
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+ };
+};
+
&blsp1_uart2 {
status = "okay";
};
--
2.36.0
