RE: [PATCH v8 1/4] drm/msm/dp: Add eDP support via aux_bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Doug,

>On Thu, Apr 21, 2022 at 7:37 AM Sankeerth Billakanti
><quic_sbillaka@xxxxxxxxxxx> wrote:
>>
>> @@ -1530,6 +1532,61 @@ void msm_dp_debugfs_init(struct msm_dp
>*dp_display, struct drm_minor *minor)
>>         }
>>  }
>>
>> +static int dp_display_get_next_bridge(struct msm_dp *dp) {
>> +       int rc;
>> +       struct dp_display_private *dp_priv;
>> +       struct device_node *aux_bus;
>> +       struct device *dev;
>> +
>> +       dp_priv = container_of(dp, struct dp_display_private, dp_display);
>> +       dev = &dp_priv->pdev->dev;
>> +       aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
>> +
>> +       if (aux_bus && dp->is_edp) {
>> +               dp_display_host_init(dp_priv);
>> +               dp_catalog_ctrl_hpd_config(dp_priv->catalog);
>> +               dp_display_host_phy_init(dp_priv);
>> +               enable_irq(dp_priv->irq);
>> +
>> +               rc = devm_of_dp_aux_populate_ep_devices(dp_priv->aux);
>
>I think a comment was requested above that line saying something like:
>
>/*
> * The code below assumes that the panel will finish probing
> * by the time devm_of_dp_aux_populate_ep_devices() returns.
> * This isn't a great assumption since it will fail if the
> * panel driver is probed asynchronously but is the best we
> * can do without a bigger driver reorganization.
> */
>
>

Will add the comment

>> +               of_node_put(aux_bus);
>> +               if (rc)
>> +                       goto edp_error;
>> +       } else if (dp->is_edp) {
>> +               DRM_ERROR("eDP aux_bus not found\n");
>> +               rc = -ENODEV;
>> +               goto error;
>
>This goto doesn't add much. Just leave the above like it was in v7.
>return -ENODEV w/ no goto.
>
>

Okay

>> +       }
>> +
>> +       /*
>> +        * External bridges are mandatory for eDP interfaces: one has to
>> +        * provide at least an eDP panel (which gets wrapped into panel-
>bridge).
>> +        *
>> +        * For DisplayPort interfaces external bridges are optional, so
>> +        * silently ignore an error if one is not present (-ENODEV).
>> +        */
>> +       rc = dp_parser_find_next_bridge(dp_priv->parser);
>> +       if (rc && dp->is_edp) {
>> +               DRM_ERROR("eDP: cannot find the next bridge, rc = %d\n", rc);
>> +               goto edp_error;
>> +       } else if (rc && rc != -ENODEV) {
>> +               DRM_ERROR("DP: cannot find the next bridge, rc = %d\n", rc);
>> +               goto error;
>> +       }
>
>The above wouldn't be my favorite way of doing this. Instead, I would have
>written:
>
>  if (rc) {
>    DRM_ERROR("Cannot find the next bridge, rc = %d\n", rc);
>    goto err;
>  }
>  ...
>
>err:
>  if (dp->is_edp) {
>    disable_irq(...);
>    dp_display_host_phy_exit(...);
>    dp_display_host_deinit(...);
>  }
>  return rc;
>

If rc is ENODEV for DP, then we need to return 0. Shall I add like below ?

err:
  if (dp->is_edp) {
    disable_irq(...);
    dp_display_host_phy_exit(...);
    dp_display_host_deinit(...);
  } else
        If (rc == -ENODEV)
            rc = 0;
  return rc;

>> +
>> +       dp->next_bridge = dp_priv->parser->next_bridge;
>> +
>> +       return 0;
>> +
>> +edp_error:
>> +       disable_irq(dp_priv->irq);
>> +       dp_display_host_phy_exit(dp_priv);
>> +       dp_display_host_deinit(dp_priv);
>> +error:
>> +       return rc;
>> +}
>> +
>>  int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device
>*dev,
>>                         struct drm_encoder *encoder)  {
>
>With the above fixes, I'd be happy enough for my Reviewed-by tag with the
>expectation that continued work will happen to continue cleaning this up.
>
>
>-Doug




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux