Re: [PATCH v3 0/2] Skip phy initialization for DWC3 USB Controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19.4.2022 13.17, Sandeep Maheswaram (Temp) (QUIC) wrote:
> Hi Mathias, Felipe,
> 
>> -----Original Message-----
>> From: Sandeep Maheswaram (Temp) (QUIC) <quic_c_sanm@xxxxxxxxxxx>
>> Sent: Thursday, April 7, 2022 3:01 PM
>> To: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>; Felipe Balbi
>> <balbi@xxxxxxxxxx>; Stephen Boyd <swboyd@xxxxxxxxxxxx>; Doug
>> Anderson <dianders@xxxxxxxxxxxx>; Matthias Kaehlcke
>> <mka@xxxxxxxxxxxx>; Mathias Nyman <mathias.nyman@xxxxxxxxx>
>> Cc: linux-arm-msm@xxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx; linux-
>> kernel@xxxxxxxxxxxxxxx; Pavan Kumar Kondeti (QUIC)
>> <quic_pkondeti@xxxxxxxxxxx>; Pratham Pratap (QUIC)
>> <quic_ppratap@xxxxxxxxxxx>; Krishna Kurapati PSSNV (QUIC)
>> <quic_kriskura@xxxxxxxxxxx>; Vidya Sagar Pulyala (Temp) (QUIC)
>> <quic_vpulyala@xxxxxxxxxxx>; Sandeep Maheswaram (Temp) (QUIC)
>> <quic_c_sanm@xxxxxxxxxxx>
>> Subject: [PATCH v3 0/2] Skip phy initialization for DWC3 USB Controllers
>>
>> Runtime suspend of phy drivers was failing from DWC3 driver as runtime
>> usage value is 2 because the phy is initialized from
>> DWC3 core and HCD core.
>> Some controllers like DWC3 and CDNS3 manage phy in their core drivers.
>> This property can be set to avoid phy initialization in HCD core.
>>
>> v3:
>> Coming back to this series based on discussion at below thread
>> https://patchwork.kernel.org/project/linux-arm-msm/patch/1648103831-
>> 12347-4-git-send-email-quic_c_sanm@xxxxxxxxxxx/
>> Dropped the dt bindings PATCH 1/3 in v2
>> https://patchwork.kernel.org/project/linux-arm-msm/cover/1636353710-
>> 25582-1-git-send-email-quic_c_sanm@xxxxxxxxxxx/
>>
>> v2:
>> Updated the commit descriptions.
>> Changed subject prefix from dwc to dwc3.
>> Increased props array size.
>>
>> Sandeep Maheswaram (2):
>>   usb: host: xhci-plat: Add device property to set XHCI_SKIP_PHY_INIT
>>     quirk
>>   usb: dwc3: host: Set the property usb-skip-phy-init
>>
>>  drivers/usb/dwc3/host.c      | 4 +++-
>>  drivers/usb/host/xhci-plat.c | 3 +++
>>  2 files changed, 6 insertions(+), 1 deletion(-)
>>
>> --
>> 2.7.4
> 
> Please let me know your opinion about this series.

Otherwise looks good but wondering if we should document that new device
property somewhere. 

Couldn't find a standard way how those device properties excluded from
Documentation/devicetree/binding are documented

Thanks
-Mathias




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux