Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> 于2022年4月19日周二 15:33写道：
>
> On 19/04/2022 03:09, Bryan O'Donoghue wrote:
> > Add msm8939 a derivative SoC of msm8916. This SoC contains a number of key
> > differences to msm8916.
> >
> > - big.LITTLE Octa Core - quad 1.5GHz + quad 1.0GHz
> > - DRAM 1x800 LPDDR3
> > - Camera 4+4 lane CSI
> > - Venus @ 1080p60 HEVC
> > - DSI x 2
> > - Adreno A405
> > - WiFi wcn3660/wcn3680b 802.11ac
> >
> > Co-developed-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> > Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> > Co-developed-by: Jun Nie <jun.nie@xxxxxxxxxx>
> > Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
> > Co-developed-by: Benjamin Li <benl@xxxxxxxxxxxx>
> > Signed-off-by: Benjamin Li <benl@xxxxxxxxxxxx>
> > Co-developed-by: James Willcox <jwillcox@xxxxxxxxxxxx>
> > Signed-off-by: James Willcox <jwillcox@xxxxxxxxxxxx>
> > Co-developed-by: Leo Yan <leo.yan@xxxxxxxxxx>
> > Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
> > Co-developed-by: Joseph Gates <jgates@xxxxxxxxxxxx>
> > Signed-off-by: Joseph Gates <jgates@xxxxxxxxxxxx>
> > Co-developed-by: Max Chen <mchen@xxxxxxxxxxxx>
> > Signed-off-by: Max Chen <mchen@xxxxxxxxxxxx>
> > Co-developed-by: Zac Crosby <zac@xxxxxxxxxxxx>
> > Signed-off-by: Zac Crosby <zac@xxxxxxxxxxxx>
> > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/msm8939.dtsi | 2017 +++++++++++++++++++++++++
> > 1 file changed, 2017 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/qcom/msm8939.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
> > new file mode 100644
> > index 000000000000..f1aa79b7d0e9
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
> > @@ -0,0 +1,2017 @@
> > +// SPDX-License-Identifier: BSD-3-Clause
> > +/*
> > + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
> > + * Copyright (c) 2020-2022, Linaro Limited
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <dt-bindings/interconnect/qcom,msm8939.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/clock/qcom,gcc-msm8939.h>
> > +#include <dt-bindings/reset/qcom,gcc-msm8939.h>
> > +#include <dt-bindings/clock/qcom,rpmcc.h>
> > +#include <dt-bindings/power/qcom-rpmpd.h>
> > +#include <dt-bindings/thermal/thermal.h>
> > +
> > +/ {
> > + model = "Qualcomm Technologies, Inc. MSM8939";
> > + compatible = "qcom,msm8939";
> > + qcom,msm-id = <239 0>, <239 0x30000>, <241 0x30000>, <263 0x30000>;
> > +
> > + interrupt-parent = <&intc>;
> > +
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + memory {
> > + device_type = "memory";
> > + /* We expect the bootloader to fill in the reg */
> > + reg = <0 0 0 0>;
> > + };
> > +
> > + reserved-memory {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + tz-apps@86000000 {
> > + reg = <0x0 0x86000000 0x0 0x300000>;
> > + no-map;
> > + };
> > +
> > + smem_mem: smem_region@86300000 {
>
> No underscores in node names. Why this is region (in node name) and
> others are not?
>
> > + reg = <0x0 0x86300000 0x0 0x100000>;
> > + no-map;
> > + };
> > +
> > + hypervisor@86400000 {
> > + reg = <0x0 0x86400000 0x0 0x100000>;
> > + no-map;
> > + };
> > +
> > + tz@86500000 {
> > + reg = <0x0 0x86500000 0x0 0x180000>;
> > + no-map;
> > + };
> > +
> > + reserved@8668000 {
> > + reg = <0x0 0x86680000 0x0 0x80000>;
> > + no-map;
> > + };
> > +
> > + rmtfs@86700000 {
> > + compatible = "qcom,rmtfs-mem";
> > + reg = <0x0 0x86700000 0x0 0xe0000>;
> > + no-map;
> > +
> > + qcom,client-id = <1>;
> > + };
> > +
> > + rfsa@867e00000 {
> > + reg = <0x0 0x867e0000 0x0 0x20000>;
> > + no-map;
> > + };
> > +
> > + mpss_mem: mpss@86800000 {
> > + reg = <0x0 0x86800000 0x0 0x2b00000>;
> > + no-map;
> > + };
> > +
> > + wcnss_mem: wcnss@89300000 {
> > + reg = <0x0 0x89300000 0x0 0x600000>;
> > + no-map;
> > + };
> > +
> > + venus_mem: venus@89900000 {
> > + reg = <0x0 0x89900000 0x0 0x500000>;
> > + no-map;
> > + };
> > +
> > + mba_mem: mba@8ea00000 {
> > + no-map;
> > + reg = <0 0x8ea00000 0 0x100000>;
> > + };
> > + };
> > +
> > + /*
> > + * MSM8939 has a big.LITTLE hetrogeneous computing architecture,
>
> s/hetrogeneous/heterogeneous/
>
> > + * consisting of two clusters of four ARM Cortex-A53s each. The
> > + * LITTLE cluster runs at 1.0-1.2GHz, and the big cluster runs
> > + * at 1.5-1.7GHz.
> > + *
> > + * The enable method used here is spin-table which pre-supposes use
>
> s/pre-supposes/presupposes/?
>
> > + * of a 2nd stage boot shim such as lk2nd to have installed a
> > + * spin-table, the downstream non-psci/non-spin-table method that
> > + * default msm8916/msm8936/msm8939 will not be supported upstream.
> > + */
> > + cpu-map {
> > + /* LITTLE (efficiency) cluster */
> > + cluster0 {
> > + core0 {
> > + cpu = <&CPU4>;
> > + };
> > +
> > + core1 {
> > + cpu = <&CPU5>;
> > + };
> > +
> > + core2 {
> > + cpu = <&CPU6>;
> > + };
> > +
> > + core3 {
> > + cpu = <&CPU7>;
> > + };
> > + };
> > +
> > + /* big (performance) cluster */
> > + /* Boot CPU is cluster 1 core 0 */
> > + cluster1 {
> > + core0 {
> > + cpu = <&CPU0>;
> > + };
> > +
> > + core1 {
> > + cpu = <&CPU1>;
> > + };
> > +
> > + core2 {
> > + cpu = <&CPU2>;
> > + };
> > +
> > + core3 {
> > + cpu = <&CPU3>;
> > + };
> > + };
> > + };
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + CPU0: cpu@100 {
>
> lowercalse labels
>
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53", "arm,armv8";
> > + enable-method = "spin-table";
> > + reg = <0x100>;
> > + next-level-cache = <&L2_1>;
> > + qcom,acc = <&acc0>;
> > + qcom,saw = <&saw0>;
> > + cpu-idle-states = <&CPU_SPC>;
> > + clocks = <&apcs1_mbox>;
> > + /* operating-points-v2 = <&cluster1_opp_table>;
> > + * power-domains = <&cpr>;
> > + * power-domain-names = "cpr";
> > + */
> > + #cooling-cells = <2>;
> > + L2_1: l2-cache-cluster1 {
>
> lowercase labels, the same applies further.
>
> > + compatible = "cache";
> > + cache-level = <2>;
> > + };
> > + };
> > +
> > + CPU1: cpu@101 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53", "arm,armv8";
> > + enable-method = "spin-table";
> > + reg = <0x101>;
> > + next-level-cache = <&L2_1>;
> > + qcom,acc = <&acc1>;
> > + qcom,saw = <&saw1>;
> > + clocks = <&apcs1_mbox>;
> > + /* operating-points-v2 = <&cluster1_opp_table>;
>
> No dead code in the kernel. If you need it here, please document. The
> same applies further.
>
> > + * power-domains = <&cpr>;
> > + * power-domain-names = "cpr";
> > + */
> > + #cooling-cells = <2>;
> > + };
> > +
> > + CPU2: cpu@102 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53", "arm,armv8";
> > + enable-method = "spin-table";
> > + reg = <0x102>;
> > + next-level-cache = <&L2_1>;
> > + qcom,acc = <&acc2>;
> > + qcom,saw = <&saw2>;
> > + clocks = <&apcs1_mbox>;
> > + /* operating-points-v2 = <&cluster1_opp_table>;
> > + * power-domains = <&cpr>;
> > + * power-domain-names = "cpr";
> > + */
> > + #cooling-cells = <2>;
> > + };
> > +
> > + CPU3: cpu@103 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53", "arm,armv8";
> > + enable-method = "spin-table";
> > + reg = <0x103>;
> > + next-level-cache = <&L2_1>;
> > + qcom,acc = <&acc3>;
> > + qcom,saw = <&saw3>;
> > + clocks = <&apcs1_mbox>;
> > + /* operating-points-v2 = <&cluster1_opp_table>;
> > + * power-domains = <&cpr>;
> > + * power-domain-names = "cpr";
> > + */
> > + #cooling-cells = <2>;
> > + };
> > +
> > + CPU4: cpu@0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53", "arm,armv8";
> > + enable-method = "spin-table";
> > + reg = <0x0>;
> > + qcom,acc = <&acc4>;
> > + qcom,saw = <&saw4>;
> > + clocks = <&apcs0>;
> > + /* operating-points-v2 = <&cluster0_opp_table>;
> > + * power-domains = <&cpr>;
> > + * power-domain-names = "cpr";
> > + */
> > + #cooling-cells = <2>;
> > + next-level-cache = <&L2_0>;
> > + L2_0: l2-cache-cluster0 {
> > + compatible = "cache";
> > + cache-level = <2>;
> > + };
> > + };
> > +
> > + CPU5: cpu@1 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53", "arm,armv8";
> > + enable-method = "spin-table";
> > + reg = <0x1>;
> > + next-level-cache = <&L2_0>;
> > + qcom,acc = <&acc5>;
> > + qcom,saw = <&saw5>;
> > + clocks = <&apcs0>;
> > + /* operating-points-v2 = <&cluster0_opp_table>;
> > + * power-domains = <&cpr>;
> > + * power-domain-names = "cpr";
> > + */
> > + #cooling-cells = <2>;
> > + };
> > +
> > + CPU6: cpu@2 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53", "arm,armv8";
> > + enable-method = "spin-table";
> > + reg = <0x2>;
> > + next-level-cache = <&L2_0>;
> > + qcom,acc = <&acc6>;
> > + qcom,saw = <&saw6>;
> > + clocks = <&apcs0>;
> > + /* operating-points-v2 = <&cluster0_opp_table>;
> > + * power-domains = <&cpr>;
> > + * power-domain-names = "cpr";
> > + */
> > + #cooling-cells = <2>;
> > + };
> > +
> > + CPU7: cpu@3 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53", "arm,armv8";
> > + enable-method = "spin-table";
> > + reg = <0x3>;
> > + next-level-cache = <&L2_0>;
> > + qcom,acc = <&acc7>;
> > + qcom,saw = <&saw7>;
> > + clocks = <&apcs0>;
> > + /* operating-points-v2 = <&cluster0_opp_table>;
> > + * power-domains = <&cpr>;
> > + * power-domain-names = "cpr";
> > + */
> > + #cooling-cells = <2>;
> > + };
> > +
> > + idle-states {
> > + CPU_SPC: spc {
> > + compatible = "arm,idle-state";
> > + arm,psci-suspend-param = <0x40000002>;
> > + entry-latency-us = <130>;
> > + exit-latency-us = <150>;
> > + min-residency-us = <2000>;
> > + local-timer-stop;
> > + };
> > + };
> > + };
> > +
> > + cluster0_opp_table: cluster0-opp-table {
> > + compatible = "operating-points-v2-kryo-cpu";
> > + opp-shared;
> > +
> > + opp-249600000 {
> > + opp-hz = /bits/ 64 <249600000>;
> > + required-opps = <&cpr_opp1>;
> > + };
> > +
> > + opp-499200000 {
> > + opp-hz = /bits/ 64 <499200000>;
> > + required-opps = <&cpr_opp3>;
> > + };
> > +
> > + opp-800000000 {
> > + opp-hz = /bits/ 64 <800000000>;
> > + required-opps = <&cpr_opp6>;
> > + };
> > +
> > + opp-1113600000 {
> > + opp-hz = /bits/ 64 <1113600000>;
> > + required-opps = <&cpr_opp9>;
> > + };
> > + };
> > +
> > + cluster1_opp_table: cluster1-opp-table {
> > + compatible = "operating-points-v2-kryo-cpu";
> > + opp-shared;
> > +
> > + opp-200000000 {
> > + opp-hz = /bits/ 64 <200000000>;
> > + required-opps = <&cpr_opp1>;
> > + };
> > +
> > + opp-400000000 {
> > + opp-hz = /bits/ 64 <400000000>;
> > + required-opps = <&cpr_opp2>;
> > + };
> > +
> > + opp-533330000 {
> > + opp-hz = /bits/ 64 <533330000>;
> > + required-opps = <&cpr_opp4>;
> > + };
> > +
> > + opp-800000000 {
> > + opp-hz = /bits/ 64 <800000000>;
> > + required-opps = <&cpr_opp5>;
> > + };
> > +
> > + opp-1113600000 {
> > + opp-hz = /bits/ 64 <1113600000>;
> > + required-opps = <&cpr_opp7>;
> > + };
> > +
> > + opp-1497600000 {
> > + opp-hz = /bits/ 64 <1497600000>;
> > + required-opps = <&cpr_opp8>;
> > + };
> > + };
> > +
> > + /* Frequencies in below opp is for cpr_opp virtual corner calculation,
>
> Generic Linux coding style comments, so:
> /*
> * Frequencies....
> * ...
> */
>
> > + * not strictly coupled with frquencies in CPU opp for CPUs may require
> > + * different cpr_opp for specific frquency.
>
> Multiple typos. Please run spell check.
>
> > + */
> > + cpr_opp_table: cpr-opp-table {
> > + compatible = "operating-points-v2-qcom-level";
> > +
> > + cpr_opp1: opp1 {
>
> Why these opps are named with numerical suffix but other with frequency
> suffix?
Hi Krzysztof,
Because the 200MHz in cpr is just used as a parameter to calculate the
voltage adjustment.
The frequency in cpr_opp is not directly related to CPU frequency.
Such as cpr_opp1 is for
200MHz on cluster1 while it is for 249MHz on cluster0. Do you still
suggest to use
cpr_opp_200 or so in this case?
>
> > + opp-hz = /bits/ 64 <200000000>;
> > + opp-level = <1>;
> > + qcom,opp-fuse-level = <1>;
> > + };
> > + cpr_opp2: opp2 {
> > + opp-hz = /bits/ 64 <400000000>;
> > + opp-level = <2>;
> > + qcom,opp-fuse-level = <1>;
> > + };
> > + cpr_opp3: opp3 {
> > + opp-hz = /bits/ 64 <499200000>;
> > + opp-level = <3>;
> > + qcom,opp-fuse-level = <2>;
> > + };
> > + cpr_opp4: opp4 {
> > + opp-hz = /bits/ 64 <533330000>;
> > + opp-level = <4>;
> > + qcom,opp-fuse-level = <2>;
> > + };
> > + cpr_opp5: opp5 {
> > + opp-hz = /bits/ 64 <800000000>;
> > + opp-level = <5>;
> > + qcom,opp-fuse-level = <2>;
> > + };
> > + cpr_opp6: opp6 {
> > + opp-hz = /bits/ 64 <960000000>;
> > + opp-level = <6>;
> > + qcom,opp-fuse-level = <2>;
> > + };
> > + cpr_opp7: opp7 {
> > + opp-hz = /bits/ 64 <1113600000>;
> > + opp-level = <7>;
> > + qcom,opp-fuse-level = <2>;
> > + };
> > + cpr_opp8: opp8 {
> > + opp-hz = /bits/ 64 <1497600000>;
> > + opp-level = <8>;
> > + qcom,opp-fuse-level = <3>;
> > + };
> > + cpr_opp9: opp9 {
> > + opp-hz = /bits/ 64 <1497500000>;
> > + opp-level = <9>;
> > + qcom,opp-fuse-level = <3>;
> > + };
> > + };
> > +
> > + cci_opp_table: cci-opp-table {
> > + compatible = "operating-points-v2";
> > +
> > + opp-200000000 {
> > + opp-hz = /bits/ 64 <200000000>;
> > + };
> > +
> > + opp-297600000 {
> > + opp-hz = /bits/ 64 <297600000>;
> > + };
> > +
> > + opp-400000000 {
> > + opp-hz = /bits/ 64 <400000000>;
> > + };
> > +
> > + opp-595200000 {
> > + opp-hz = /bits/ 64 <595200000>;
> > + };
> > + };
> > +
> > + gpu_opp_table: gpu-opp-table {
>
> If table is used by only one device, define it inside that device node.
>
> > + compatible = "operating-points-v2";
> > +
> > + opp-550000000 {
> > + opp-hz = /bits/ 64 <550000000>;
> > + };
> > +
> > + opp-465000000 {
> > + opp-hz = /bits/ 64 <465000000>;
> > + };
> > +
> > + opp-400000000 {
> > + opp-hz = /bits/ 64 <400000000>;
> > + };
> > +
> > + opp-220000000 {
> > + opp-hz = /bits/ 64 <220000000>;
> > + };
> > +
> > + opp-19200000 {
> > + opp-hz = /bits/ 64 <19200000>;
> > + };
> > + };
> > +
> > + pmu {
> > + compatible = "arm,cortex-a53-pmu";
> > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
>
> No PMU nodes for other cores?
>
> > + };
> > +
> > + thermal_zones: thermal-zones {
> > + cpu0-thermal {
> > + polling-delay-passive = <250>;
> > + polling-delay = <1000>;
> > +
> > + thermal-sensors = <&tsens 5>;
> > +
> > + trips {
> > + cpu0_alert: trip0 {
> > + temperature = <75000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > + cpu0_crit: trip1 {
> > + temperature = <115000>;
> > + hysteresis = <0>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&cpu0_alert>;
> > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > + };
> > +
> > + cpu1-thermal {
> > + polling-delay-passive = <250>;
> > + polling-delay = <1000>;
> > +
> > + thermal-sensors = <&tsens 6>;
> > +
> > + trips {
> > + cpu1_alert: trip0 {
> > + temperature = <75000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > + cpu1_crit: trip1 {
> > + temperature = <110000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&cpu1_alert>;
> > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > + };
> > +
> > + cpu2-thermal {
> > + polling-delay-passive = <250>;
> > + polling-delay = <1000>;
> > +
> > + thermal-sensors = <&tsens 7>;
> > +
> > + trips {
> > + cpu2_alert: trip0 {
> > + temperature = <75000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > + cpu2_crit: trip1 {
> > + temperature = <110000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&cpu2_alert>;
> > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > + };
> > +
> > + cpu3-thermal {
> > + polling-delay-passive = <250>;
> > + polling-delay = <1000>;
> > +
> > + thermal-sensors = <&tsens 8>;
> > +
> > + trips {
> > + cpu3_alert: trip0 {
> > + temperature = <75000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > + cpu3_crit: trip1 {
> > + temperature = <110000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&cpu3_alert>;
> > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > + };
> > +
> > + cpu4567-thermal {
> > + polling-delay-passive = <250>;
> > + polling-delay = <1000>;
> > +
> > + thermal-sensors = <&tsens 9>;
> > +
> > + trips {
> > + cpu4567_alert: trip0 {
> > + temperature = <75000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > + cpu4567_crit: trip1 {
> > + temperature = <110000>;
> > + hysteresis = <2000>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&cpu4567_alert>;
> > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > + };
> > +
> > + gpu-thermal {
> > + polling-delay-passive = <0>;
> > + polling-delay = <0>;
> > +
> > + thermal-sensors = <&tsens 3>;
> > + };
> > +
> > + modem1-thermal {
> > + polling-delay-passive = <0>;
> > + polling-delay = <0>;
> > +
> > + thermal-sensors = <&tsens 0>;
> > + };
> > +
> > + modem2-thermal {
> > + polling-delay-passive = <0>;
> > + polling-delay = <0>;
> > +
> > + thermal-sensors = <&tsens 2>;
> > + };
> > +
> > + venus_camera-thermal {
> > + polling-delay-passive = <0>;
> > + polling-delay = <0>;
> > +
> > + thermal-sensors = <&tsens 1>;
> > + };
> > + };
> > +
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> > + };
> > +
> > + clocks {
> > + xo_board: xo_board {
>
> Generic node names, no underscores in node names. This applies everywhere.
>
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <19200000>;
> > + };
> > +
> > + sleep_clk: sleep_clk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <32768>;
> > + };
> > + };
> > +
> > + smem {
> > + compatible = "qcom,smem";
> > +
> > + memory-region = <&smem_mem>;
> > + qcom,rpm-msg-ram = <&rpm_msg_ram>;
> > +
> > + hwlocks = <&tcsr_mutex 3>;
> > + };
> > +
> > + firmware {
> > + scm: scm {
> > + compatible = "qcom,scm";
> > + clocks = <&gcc GCC_CRYPTO_CLK>,
> > + <&gcc GCC_CRYPTO_AXI_CLK>,
> > + <&gcc GCC_CRYPTO_AHB_CLK>;
> > + clock-names = "core", "bus", "iface";
> > + #reset-cells = <1>;
> > +
> > + qcom,dload-mode = <&tcsr 0x6100>;
> > + };
> > + };
> > +
> > + soc: soc {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0 0 0 0xffffffff>;
> > + compatible = "simple-bus";
> > +
> > + qfprom_cpr: qfprom_cpr@58000 {
>
> Generic node names, no underscores in node names. This applies everywhere.
>
> > + compatible = "qcom,qfprom";
> > + reg = <0x00058000 0x1000>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + cpr_efuse_init_voltage1: ivoltage1@dc {
>
> s/ivoltageX/voltage/
How about cpr_efuse_init_voltage_dc? There are 3
cpr_efuse_init_voltage* node here.
>
> > + reg = <0xdc 0x4>;
> > + bits = <4 6>;
> > + };
> > + cpr_efuse_init_voltage2: ivoltage2@da {
> > + reg = <0xda 0x4>;
> > + bits = <2 6>;
> > + };
> > + cpr_efuse_init_voltage3: ivoltage3@d8 {
> > + reg = <0xd8 0x4>;
> > + bits = <0 6>;
> > + };
> > + cpr_efuse_quot1: quot1@dc {
>
> Similar. Why do you need suffix number?
>
> > + reg = <0xdd 0x8>;
> > + bits = <2 12>;
> > + };
> > + cpr_efuse_quot2: quot2@da {
> > + reg = <0xdb 0x8>;
> > + bits = <0x0 12>;
> > + };
> > + cpr_efuse_quot3: quot3@d8 {
> > + reg = <0xd8 0x8>;
> > + bits = <6 12>;
> > + };
> > + cpr_efuse_ring1: ring1@de {
> > + reg = <0xde 0x4>;
> > + bits = <6 3>;
> > + };
> > + cpr_efuse_ring2: ring2@de {
> > + reg = <0xde 0x4>;
> > + bits = <6 3>;
> > + };
> > + cpr_efuse_ring3: ring3@de {
> > + reg = <0xde 0x4>;
> > + bits = <6 3>;
> > + };
> > + cpr_efuse_revision: revision@4 {
> > + reg = <0x5 0x1>;
> > + bits = <5 1>;
> > + };
> > + cpr_efuse_revision_high: revision_high@4 {
> > + reg = <0x7 0x1>;
> > + bits = <0 1>;
> > + };
> > + cpr_efuse_pvs_version: pvs@4 {
> > + reg = <0x3 0x1>;
> > + bits = <5 1>;
> > + };
> > + cpr_efuse_pvs_version_high: pvs_high@4 {
> > + reg = <0x6 0x1>;
> > + bits = <2 2>;
> > + };
> > + cpr_efuse_speedbin: speedbin@c {
> > + reg = <0xc 0x1>;
> > + bits = <2 3>;
> > + };
> > +
> > + };
> > +
> > + acc0: clock-controller@b088000 {
> > + compatible = "qcom,kpss-acc-v2";
> > + reg = <0xb088000 0x1000>;
> > + };
> > +
> > + saw0: power-controller@b089000 {
> > + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
> > + reg = <0xb089000 0x1000>;
> > + };
> > +
> > + acc1: clock-controller@b098000 {
> > + compatible = "qcom,kpss-acc-v2";
> > + reg = <0xb098000 0x1000>;
> > + };
> > +
> > + saw1: power-controller@b099000 {
> > + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
> > + reg = <0xb099000 0x1000>;
> > + };
> > +
> > + acc2: clock-controller@b0a8000 {
> > + compatible = "qcom,kpss-acc-v2";
> > + reg = <0xb0a8000 0x1000>;
> > + };
> > +
> > + saw2: power-controller@b0a9000 {
> > + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
> > + reg = <0xb0a9000 0x1000>;
> > + };
> > +
> > + acc3: clock-controller@b0b8000 {
> > + compatible = "qcom,kpss-acc-v2";
> > + reg = <0xb0b8000 0x1000>;
> > + };
> > +
> > + saw3: power-domain@b0b9000 {
> > + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
> > + reg = <0xb0b9000 0x1000>;
> > + };
> > +
> > + acc4: clock-controller@b188000 {
> > + compatible = "qcom,kpss-acc-v2";
> > + reg = <0xb188000 0x1000>;
> > + };
> > +
> > + saw4: power-controller@b189000 {
> > + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
> > + reg = <0xb189000 0x1000>;
> > + };
> > +
> > + acc5: clock-controller@b198000 {
> > + compatible = "qcom,kpss-acc-v2";
> > + reg = <0xb198000 0x1000>;
> > + };
> > +
> > + saw5: power-controller@b199000 {
> > + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
> > + reg = <0xb199000 0x1000>;
> > + };
> > +
> > + acc6: clock-controller@b1a8000 {
> > + compatible = "qcom,kpss-acc-v2";
> > + reg = <0xb1a8000 0x1000>;
> > + };
> > +
> > + saw6: power-controller@b1a9000 {
> > + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
> > + reg = <0xb1a9000 0x1000>;
> > + };
> > +
> > + acc7: clock-controller@b1b8000 {
> > + compatible = "qcom,kpss-acc-v2";
> > + reg = <0xb1b8000 0x1000>;
> > + };
> > +
> > + saw7: power-controller@b1b9000 {
> > + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
> > + reg = <0xb1b9000 0x1000>;
> > + };
> > +
> > + restart@4ab000 {
> > + compatible = "qcom,pshold";
> > + reg = <0x4ab000 0x4>;
> > + };
> > +
> > + msmgpio: pinctrl@1000000 {
> > + compatible = "qcom,msm8916-pinctrl";
> > + reg = <0x1000000 0x300000>;
> > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + };
> > +
> > + gcc: clock-controller@1800000 {
> > + compatible = "qcom,gcc-msm8939";
> > + #clock-cells = <1>;
> > + #reset-cells = <1>;
> > + #power-domain-cells = <1>;
> > + reg = <0x1800000 0x80000>;
> > + clocks = <&xo_board>, <&sleep_clk>;
> > + clock-names = "xo", "sleep_clk";
> > + };
> > +
> > + tcsr_mutex_regs: syscon@1905000 {
> > + compatible = "syscon";
> > + reg = <0x1905000 0x20000>;
> > + };
> > +
> > + tcsr: syscon@1937000 {
> > + compatible = "qcom,tcsr-msm8916", "syscon";
> > + reg = <0x1937000 0x30000>;
> > + };
> > +
> > + tcsr_mutex: hwlock {
> > + compatible = "qcom,tcsr-mutex";
> > + syscon = <&tcsr_mutex_regs 0 0x1000>;
> > + #hwlock-cells = <1>;
> > + };
> > +
> > + rpm_msg_ram: memory@60000 {
> > + compatible = "qcom,rpm-msg-ram";
> > + reg = <0x60000 0x8000>;
> > + };
> > +
> > + blsp1_uart1: serial@78af000 {
> > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> > + reg = <0x78af000 0x200>;
> > + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > + dmas = <&blsp_dma 1>, <&blsp_dma 0>;
> > + dma-names = "rx", "tx";
> > + status = "disabled";
> > + };
> > +
> > + a53pll_c1: clock@b016000 {
> > + compatible = "qcom,msm8939-a53pll";
> > + reg = <0xb016000 0x40>;
> > + #clock-cells = <0>;
> > + };
> > +
> > + a53pll_c0: clock@b116000 {
> > + compatible = "qcom,msm8939-a53pll";
> > + reg = <0xb116000 0x40>;
> > + #clock-cells = <0>;
> > + };
> > +
> > + a53pll_cci: clock@b1d0000 {
> > + compatible = "qcom,msm8939-a53pll";
> > + reg = <0xb1d0000 0x40>;
> > + #clock-cells = <0>;
> > + };
> > +
> > + apcs2: mailbox@b1d1000 {
> > + compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
> > + reg = <0xb1d1000 0x1000>;
> > + #mbox-cells = <1>;
> > + clocks = <&a53pll_cci>, <&gcc GPLL0_VOTE>, <&xo_board>;
> > + clock-names = "pll", "aux", "ref";
> > + #clock-cells = <0>;
> > + clock-output-names = "a53mux_cci";
> > + };
> > +
> > + apcs1_mbox: mailbox@b011000 {
> > + compatible = "qcom,msm8916-apcs-kpss-global";
> > + reg = <0xb011000 0x1000>;
> > + #mbox-cells = <1>;
> > + clocks = <&a53pll_c1>, <&gcc GPLL0_VOTE>, <&xo_board>;
> > + clock-names = "pll", "aux", "ref";
> > + #clock-cells = <0>;
> > + clock-output-names = "a53mux_c1";
> > + /* Set a nominal frequency on a53mux_cci */
> > + assigned-clocks = <&apcs2>;
> > + assigned-clock-rates = <297600000>;
> > + };
> > +
> > + apcs1: syscon@b111000 {
> > + compatible = "syscon";
> > + reg = <0xb011000 0x1000>;
> > + };
> > +
> > + apcs0: mailbox@b111000 {
> > + compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
> > + reg = <0xb111000 0x1000>;
> > + #mbox-cells = <1>;
> > + clocks = <&a53pll_c0>, <&gcc GPLL0_VOTE>, <&xo_board>;
> > + clock-names = "pll", "aux", "ref";
> > + #clock-cells = <0>;
> > + clock-output-names = "a53mux_c0";
> > + };
> > +
> > + blsp1_uart2: serial@78b0000 {
> > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> > + reg = <0x78b0000 0x200>;
> > + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > + dmas = <&blsp_dma 3>, <&blsp_dma 2>;
> > + dma-names = "rx", "tx";
> > + status = "disabled";
> > + };
> > +
> > + blsp_dma: dma@7884000 {
> > + compatible = "qcom,bam-v1.7.0";
> > + reg = <0x07884000 0x23000>;
> > + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "bam_clk";
> > + #dma-cells = <1>;
> > + qcom,ee = <0>;
> > + status = "disabled";
> > + };
> > +
> > + blsp_spi1: spi@78b5000 {
> > + compatible = "qcom,spi-qup-v2.2.1";
> > + reg = <0x078b5000 0x500>;
> > + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
> > + <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > + dmas = <&blsp_dma 5>, <&blsp_dma 4>;
> > + dma-names = "rx", "tx";
>
> tx/rx. Please rebase on recent linux-next and run `make dtbs_check` and
> fix all the errors.
>
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&spi1_default>;
> > + pinctrl-1 = <&spi1_sleep>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + blsp_spi2: spi@78b6000 {
> > + compatible = "qcom,spi-qup-v2.2.1";
> > + reg = <0x078b6000 0x500>;
> > + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
> > + <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > + dmas = <&blsp_dma 7>, <&blsp_dma 6>;
> > + dma-names = "rx", "tx";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&spi2_default>;
> > + pinctrl-1 = <&spi2_sleep>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + blsp_spi3: spi@78b7000 {
> > + compatible = "qcom,spi-qup-v2.2.1";
> > + reg = <0x078b7000 0x500>;
> > + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
> > + <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > + dmas = <&blsp_dma 9>, <&blsp_dma 8>;
> > + dma-names = "rx", "tx";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&spi3_default>;
> > + pinctrl-1 = <&spi3_sleep>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + blsp_spi4: spi@78b8000 {
> > + compatible = "qcom,spi-qup-v2.2.1";
> > + reg = <0x078b8000 0x500>;
> > + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
> > + <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > + dmas = <&blsp_dma 11>, <&blsp_dma 10>;
> > + dma-names = "rx", "tx";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&spi4_default>;
> > + pinctrl-1 = <&spi4_sleep>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + blsp_spi5: spi@78b9000 {
> > + compatible = "qcom,spi-qup-v2.2.1";
> > + reg = <0x078b9000 0x500>;
> > + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
> > + <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > + dmas = <&blsp_dma 13>, <&blsp_dma 12>;
> > + dma-names = "rx", "tx";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&spi5_default>;
> > + pinctrl-1 = <&spi5_sleep>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + blsp_spi6: spi@78ba000 {
> > + compatible = "qcom,spi-qup-v2.2.1";
> > + reg = <0x078ba000 0x500>;
> > + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
> > + <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > + dmas = <&blsp_dma 15>, <&blsp_dma 14>;
> > + dma-names = "rx", "tx";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&spi6_default>;
> > + pinctrl-1 = <&spi6_sleep>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + blsp_i2c1: i2c@78b5000 {
> > + compatible = "qcom,i2c-qup-v2.2.1";
> > + reg = <0x078b5000 0x500>;
> > + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> > + <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
> > + clock-names = "iface", "core";
> > + dmas = <&blsp_dma 4>, <&blsp_dma 5>;
> > + dma-names = "tx", "rx";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&i2c1_default>;
> > + pinctrl-1 = <&i2c1_sleep>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + blsp_i2c2: i2c@78b6000 {
> > + compatible = "qcom,i2c-qup-v2.2.1";
> > + reg = <0x078b6000 0x500>;
> > + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> > + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
> > + clock-names = "iface", "core";
> > + dmas = <&blsp_dma 6>, <&blsp_dma 7>;
> > + dma-names = "tx", "rx";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&i2c2_default>;
> > + pinctrl-1 = <&i2c2_sleep>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + blsp_i2c3: i2c@78b7000 {
> > + compatible = "qcom,i2c-qup-v2.2.1";
> > + reg = <0x078b7000 0x500>;
> > + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> > + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
> > + clock-names = "iface", "core";
> > + dmas = <&blsp_dma 8>, <&blsp_dma 9>;
> > + dma-names = "tx", "rx";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&i2c3_default>;
> > + pinctrl-1 = <&i2c3_sleep>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + blsp_i2c4: i2c@78b8000 {
> > + compatible = "qcom,i2c-qup-v2.2.1";
> > + reg = <0x078b8000 0x500>;
> > + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> > + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
> > + clock-names = "iface", "core";
> > + dmas = <&blsp_dma 10>, <&blsp_dma 11>;
> > + dma-names = "tx", "rx";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&i2c4_default>;
> > + pinctrl-1 = <&i2c4_sleep>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + blsp_i2c5: i2c@78b9000 {
> > + compatible = "qcom,i2c-qup-v2.2.1";
> > + reg = <0x078b9000 0x500>;
> > + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> > + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
> > + clock-names = "iface", "core";
> > + dmas = <&blsp_dma 12>, <&blsp_dma 13>;
> > + dma-names = "tx", "rx";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&i2c5_default>;
> > + pinctrl-1 = <&i2c5_sleep>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + blsp_i2c6: i2c@78ba000 {
> > + compatible = "qcom,i2c-qup-v2.2.1";
> > + reg = <0x078ba000 0x500>;
> > + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> > + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
> > + clock-names = "iface", "core";
> > + dmas = <&blsp_dma 14>, <&blsp_dma 15>;
> > + dma-names = "tx", "rx";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&i2c6_default>;
> > + pinctrl-1 = <&i2c6_sleep>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > + lpass: lpass@7708000 {
> > + status = "disabled";
> > + compatible = "qcom,apq8016-lpass-cpu";
> > + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
> > + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
> > + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
> > + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
> > + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
> > + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
> > + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
> > +
> > + clock-names = "ahbix-clk",
> > + "pcnoc-mport-clk",
> > + "pcnoc-sway-clk",
> > + "mi2s-bit-clk0",
> > + "mi2s-bit-clk1",
> > + "mi2s-bit-clk2",
> > + "mi2s-bit-clk3";
> > + #sound-dai-cells = <1>;
> > +
> > + interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "lpass-irq-lpaif";
> > + reg = <0x07708000 0x10000>;
> > + reg-names = "lpass-lpaif";
> > +
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > +
> > + lpass_codec: codec{
>
> Missing space
>
> > + compatible = "qcom,msm8916-wcd-digital-codec";
> > + reg = <0x0771c000 0x400>;
> > + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
> > + <&gcc GCC_CODEC_DIGCODEC_CLK>;
> > + clock-names = "ahbix-clk", "mclk";
> > + #sound-dai-cells = <1>;
> > + };
> > +
> > + sdhc_1: sdhci@7824000 {
> > + compatible = "qcom,sdhci-msm-v4";
> > + reg = <0x07824900 0x11c>, <0x07824000 0x800>;
> > + reg-names = "hc_mem", "core_mem";
> > +
> > + interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>, <0 138 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "hc_irq", "pwr_irq";
> > + clocks = <&gcc GCC_SDCC1_APPS_CLK>,
> > + <&gcc GCC_SDCC1_AHB_CLK>,
> > + <&xo_board>;
> > + clock-names = "core", "iface", "xo";
> > + mmc-ddr-1_8v;
> > + bus-width = <8>;
> > + non-removable;
> > + status = "disabled";
> > + };
> > +
> > + sdhc_2: sdhci@7864000 {
> > + compatible = "qcom,sdhci-msm-v4";
> > + reg = <0x07864900 0x11c>, <0x07864000 0x800>;
> > + reg-names = "hc_mem", "core_mem";
> > +
> > + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "hc_irq", "pwr_irq";
> > + clocks = <&gcc GCC_SDCC2_APPS_CLK>,
> > + <&gcc GCC_SDCC2_AHB_CLK>,
> > + <&xo_board>;
> > + clock-names = "core", "iface", "xo";
> > + bus-width = <4>;
> > + status = "disabled";
> > + };
> > +
> > + otg: usb@78d9000 {
> > + compatible = "qcom,ci-hdrc";
> > + reg = <0x78d9000 0x200>,
> > + <0x78d9200 0x200>;
> > + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_USB_HS_AHB_CLK>,
> > + <&gcc GCC_USB_HS_SYSTEM_CLK>;
> > + clock-names = "iface", "core";
> > + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
> > + assigned-clock-rates = <80000000>;
> > + resets = <&gcc GCC_USB_HS_BCR>;
> > + reset-names = "core";
> > + phy_type = "ulpi";
> > + dr_mode = "otg";
> > + ahb-burst-config = <0>;
> > + phy-names = "usb-phy";
> > + phys = <&usb_hs_phy>;
> > + status = "disabled";
> > + #reset-cells = <1>;
> > +
> > + ulpi {
> > + usb_hs_phy: phy {
> > + compatible = "qcom,usb-hs-phy-msm8916",
> > + "qcom,usb-hs-phy";
> > + #phy-cells = <0>;
> > + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
> > + clock-names = "ref", "sleep";
> > + resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
> > + reset-names = "phy", "por";
> > + qcom,init-seq = /bits/ 8 <0x0 0x44
> > + 0x1 0x6b 0x2 0x24 0x3 0x13>;
> > + };
> > + };
> > + };
> > +
> > + intc: interrupt-controller@b000000 {
> > + compatible = "qcom,msm-qgic2";
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
> > + };
> > +
> > + timer@b020000 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > + compatible = "arm,armv7-timer-mem";
> > + reg = <0xb020000 0x1000>;
> > + clock-frequency = <19200000>;
> > +
> > + frame@b021000 {
> > + frame-number = <0>;
> > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> > + reg = <0xb021000 0x1000>,
> > + <0xb022000 0x1000>;
> > + };
> > +
> > + frame@b023000 {
> > + frame-number = <1>;
> > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > + reg = <0xb023000 0x1000>;
> > + status = "disabled";
> > + };
> > +
> > + frame@b024000 {
> > + frame-number = <2>;
> > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> > + reg = <0xb024000 0x1000>;
> > + status = "disabled";
> > + };
> > +
> > + frame@b025000 {
> > + frame-number = <3>;
> > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> > + reg = <0xb025000 0x1000>;
> > + status = "disabled";
> > + };
> > +
> > + frame@b026000 {
> > + frame-number = <4>;
> > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> > + reg = <0xb026000 0x1000>;
> > + status = "disabled";
> > + };
> > +
> > + frame@b027000 {
> > + frame-number = <5>;
> > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> > + reg = <0xb027000 0x1000>;
> > + status = "disabled";
> > + };
> > +
> > + frame@b028000 {
> > + frame-number = <6>;
> > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> > + reg = <0xb028000 0x1000>;
> > + status = "disabled";
> > + };
> > + };
> > +
> > + spmi_bus: spmi@200f000 {
> > + compatible = "qcom,spmi-pmic-arb";
> > + reg = <0x200f000 0x001000>,
> > + <0x2400000 0x400000>,
> > + <0x2c00000 0x400000>,
> > + <0x3800000 0x200000>,
> > + <0x200a000 0x002100>;
> > + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> > + interrupt-names = "periph_irq";
> > + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
> > + qcom,ee = <0>;
> > + qcom,channel = <0>;
> > + #address-cells = <2>;
> > + #size-cells = <0>;
> > + interrupt-controller;
> > + #interrupt-cells = <4>;
> > + };
> > +
> > + rng@22000 {
> > + compatible = "qcom,prng";
> > + reg = <0x00022000 0x200>;
> > + clocks = <&gcc GCC_PRNG_AHB_CLK>;
> > + clock-names = "core";
> > + };
> > +
> > + qfprom: qfprom@5c000 {
> > + compatible = "qcom,qfprom";
> > + reg = <0x5c000 0x1000>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + tsens_caldata: caldata@a0 {
> > + reg = <0xa0 0x5c>;
> > + };
> > + };
> > +
> > + tsens: thermal-sensor@4a9000 {
> > + compatible = "qcom,msm8939-tsens";
> > + reg = <0x4a9000 0x1000>, /* TM */
> > + <0x4a8000 0x1000>; /* SROT */
> > + nvmem-cells = <&tsens_caldata>;
> > + nvmem-cell-names = "calib";
> > + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "uplow";
> > + #thermal-sensor-cells = <1>;
> > + };
> > +
> > + apps_iommu: iommu@1ef0000 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + #iommu-cells = <1>;
>
> compatible, reg and ranges should be the first nodes. This applies
> everywehere.
>
> > + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
> > + ranges = <0 0x1e20000 0x40000>;
> > + reg = <0x1ef0000 0x3000>;
> > + clocks = <&gcc GCC_SMMU_CFG_CLK>,
> > + <&gcc GCC_APSS_TCU_CLK>;
> > + clock-names = "iface", "bus";
> > + qcom,iommu-secure-id = <17>;
> > +
> > + /* mdp_0: */
> > + iommu-ctx@4000 {
> > + compatible = "qcom,msm-iommu-v1-ns";
> > + reg = <0x4000 0x1000>;
> > + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > +
> > + /* venus_ns: */
> > + iommu-ctx@5000 {
> > + compatible = "qcom,msm-iommu-v1-sec";
> > + reg = <0x5000 0x1000>;
> > + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > + };
> > +
> > + gpu_iommu: iommu@1f08000 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + #iommu-cells = <1>;
> > + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
> > + ranges = <0 0x1f08000 0x10000>;
> > + clocks = <&gcc GCC_SMMU_CFG_CLK>,
> > + <&gcc GCC_GFX_TCU_CLK>,
> > + <&gcc GCC_GFX_TBU_CLK>;
> > + clock-names = "iface", "bus", "tlb";
> > + qcom,iommu-secure-id = <18>;
> > +
> > + /* gfx3d_user: */
> > + iommu-ctx@1000 {
> > + compatible = "qcom,msm-iommu-v1-ns";
> > + reg = <0x1000 0x1000>;
> > + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > +
> > + /* gfx3d_priv: */
> > + iommu-ctx@2000 {
> > + compatible = "qcom,msm-iommu-v1-ns";
> > + reg = <0x2000 0x1000>;
> > + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > + };
> > +
> > + gpu@1c00000 {
> > + compatible = "qcom,adreno-405.0", "qcom,adreno";
> > + reg = <0x01c00000 0x10000>;
> > + reg-names = "kgsl_3d0_reg_memory";
> > + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "kgsl_3d0_irq";
> > + clock-names =
> > + "core",
> > + "iface",
> > + "mem",
> > + "mem_iface",
> > + "alt_mem_iface",
> > + "gfx3d",
> > + "rbbmtimer";
> > + clocks =
> > + <&gcc GCC_OXILI_GFX3D_CLK>,
> > + <&gcc GCC_OXILI_AHB_CLK>,
> > + <&gcc GCC_OXILI_GMEM_CLK>,
> > + <&gcc GCC_BIMC_GFX_CLK>,
> > + <&gcc GCC_BIMC_GPU_CLK>,
> > + <&gcc GFX3D_CLK_SRC>,
> > + <&gcc GCC_OXILI_TIMER_CLK>;
> > + power-domains = <&gcc OXILI_GDSC>;
> > + operating-points-v2 = <&gpu_opp_table>;
> > + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
> > + };
> > +
> > + mdss: mdss@1a00000 {
> > + compatible = "qcom,mdss";
> > + reg = <0x1a00000 0x1000>,
> > + <0x1ac8000 0x3000>;
> > + reg-names = "mdss_phys", "vbif_phys";
> > +
> > + power-domains = <&gcc MDSS_GDSC>;
> > +
> > + clocks = <&gcc GCC_MDSS_AHB_CLK>,
> > + <&gcc GCC_MDSS_AXI_CLK>,
> > + <&gcc GCC_MDSS_VSYNC_CLK>;
> > + clock-names = "iface",
> > + "bus",
> > + "vsync";
> > +
> > + interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > +
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + mdp: mdp@1a01000 {
> > + compatible = "qcom,mdp5";
> > + reg = <0x1a01000 0x89000>;
> > + reg-names = "mdp_phys";
> > +
> > + interrupt-parent = <&mdss>;
> > + interrupts = <0 0>;
> > +
> > + clocks = <&gcc GCC_MDSS_AHB_CLK>,
> > + <&gcc GCC_MDSS_AXI_CLK>,
> > + <&gcc GCC_MDSS_MDP_CLK>,
> > + <&gcc GCC_MDSS_VSYNC_CLK>,
> > + <&gcc GCC_MDP_TBU_CLK>,
> > + <&gcc GCC_MDP_RT_TBU_CLK>;
> > + clock-names = "iface",
> > + "bus",
> > + "core",
> > + "vsync",
> > + "tbu",
> > + "tbu_rt";
> > +
> > + iommus = <&apps_iommu 4>;
> > +
> > + interconnects = <&snoc_mm MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>,
> > + <&snoc_mm MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>;
> > + interconnect-names = "mdp0-mem", "mdp1-mem";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + mdp5_intf1_out: endpoint {
> > + remote-endpoint = <&dsi0_in>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > + mdp5_intf2_out: endpoint {
> > + remote-endpoint = <&dsi1_in>;
> > + };
> > + };
> > + };
> > + };
> > +
> > + dsi0: dsi@1a98000 {
> > + compatible = "qcom,mdss-dsi-ctrl";
> > + reg = <0x1a98000 0x25c>;
> > + reg-names = "dsi_ctrl";
> > +
> > + interrupt-parent = <&mdss>;
> > + interrupts = <4 0>;
> > +
> > + assigned-clocks = <&gcc BYTE0_CLK_SRC>,
> > + <&gcc PCLK0_CLK_SRC>;
> > + assigned-clock-parents = <&dsi0_phy 0>,
> > + <&dsi0_phy 1>;
> > +
> > + clocks = <&gcc GCC_MDSS_MDP_CLK>,
> > + <&gcc GCC_MDSS_AHB_CLK>,
> > + <&gcc GCC_MDSS_AXI_CLK>,
> > + <&gcc GCC_MDSS_BYTE0_CLK>,
> > + <&gcc GCC_MDSS_PCLK0_CLK>,
> > + <&gcc GCC_MDSS_ESC0_CLK>;
> > + clock-names = "mdp_core",
> > + "iface",
> > + "bus",
> > + "byte",
> > + "pixel",
> > + "core";
> > + phys = <&dsi0_phy>;
> > + phy-names = "dsi-phy";
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + dsi0_in: endpoint {
> > + remote-endpoint = <&mdp5_intf1_out>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > + dsi0_out: endpoint {
> > + };
> > + };
> > + };
> > + };
> > +
> > + dsi1: dsi@1aa0000 {
> > + compatible = "qcom,mdss-dsi-ctrl";
> > + reg = <0x1aa0000 0x25c>;
> > + reg-names = "dsi_ctrl";
> > +
> > + interrupt-parent = <&mdss>;
> > + interrupts = <5 0>;
> > +
> > + assigned-clocks = <&gcc BYTE1_CLK_SRC>,
> > + <&gcc PCLK1_CLK_SRC>;
> > + assigned-clock-parents = <&dsi1_phy 0>,
> > + <&dsi1_phy 1>;
> > +
> > + clocks = <&gcc GCC_MDSS_MDP_CLK>,
> > + <&gcc GCC_MDSS_AHB_CLK>,
> > + <&gcc GCC_MDSS_AXI_CLK>,
> > + <&gcc GCC_MDSS_BYTE1_CLK>,
> > + <&gcc GCC_MDSS_PCLK1_CLK>,
> > + <&gcc GCC_MDSS_ESC1_CLK>;
> > + clock-names = "mdp_core",
> > + "iface",
> > + "bus",
> > + "byte",
> > + "pixel",
> > + "core";
> > + phys = <&dsi1_phy>;
> > + phy-names = "dsi-phy";
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + dsi1_in: endpoint {
> > + remote-endpoint = <&mdp5_intf2_out>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > + dsi1_out: endpoint {
> > + };
> > + };
> > + };
> > + };
> > +
> > + dsi0_phy: dsi-phy@1a98300 {
>
> Generic node name, so just "phy"
>
> > + compatible = "qcom,dsi-phy-28nm-lp";
> > + reg = <0x1a98300 0xd4>,
> > + <0x1a98500 0x280>,
> > + <0x1a98780 0x30>;
> > + reg-names = "dsi_pll",
> > + "dsi_phy",
> > + "dsi_phy_regulator";
> > +
> > + #clock-cells = <1>;
> > + #phy-cells = <0>;
> > +
> > + clocks = <&gcc GCC_MDSS_AHB_CLK>;
> > + clock-names = "iface";
> > + qcom,dsi-phy-regulator-ldo-mode;
> > + status = "disabled";
> > + };
> > +
> > + dsi1_phy: dsi-phy@1aa0300 {
> > + compatible = "qcom,dsi-phy-28nm-lp";
> > + reg = <0x1aa0300 0xd4>,
> > + <0x1aa0500 0x280>,
> > + <0x1aa0780 0x30>;
> > + reg-names = "dsi_pll",
> > + "dsi_phy",
> > + "dsi_phy_regulator";
> > +
> > + #clock-cells = <1>;
> > + #phy-cells = <0>;
> > +
> > + clocks = <&gcc GCC_MDSS_AHB_CLK>;
> > + clock-names = "iface";
> > + qcom,dsi-phy-regulator-ldo-mode;
> > + status = "disabled";
> > + };
> > + };
> > +
> > + hexagon@4080000 {
> > + compatible = "qcom,q6v5-pil";
> > + reg = <0x04080000 0x100>,
> > + <0x04020000 0x040>;
> > +
> > + reg-names = "qdsp6", "rmb";
> > +
> > + interrupts-extended = <&intc 0 24 1>,
> > + <&hexagon_smp2p_in 0 0>,
> > + <&hexagon_smp2p_in 1 0>,
> > + <&hexagon_smp2p_in 2 0>,
> > + <&hexagon_smp2p_in 3 0>;
> > + interrupt-names = "wdog", "fatal", "ready",
> > + "handover", "stop-ack";
> > +
> > + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
> > + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
> > + <&gcc GCC_BOOT_ROM_AHB_CLK>,
> > + <&xo_board>;
> > + clock-names = "iface", "bus", "mem", "xo";
> > +
> > + qcom,smem-states = <&hexagon_smp2p_out 0>;
> > + qcom,smem-state-names = "stop";
> > +
> > + resets = <&scm 0>;
> > + reset-names = "mss_restart";
> > +
> > + power-domains = <&rpmpd MSM8939_VDDMDCX_AO>,
> > + <&rpmpd MSM8939_VDDMX>;
> > + power-domain-names = "cx", "mx";
> > + pll-supply = <&pm8916_l7>;
> > +
> > + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
> > +
> > + status = "disabled";
> > +
> > + mba {
> > + memory-region = <&mba_mem>;
> > + };
> > +
> > + mpss {
> > + memory-region = <&mpss_mem>;
> > + };
> > +
> > + smd-edge {
> > + interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
> > +
> > + qcom,smd-edge = <0>;
> > + mboxes = <&apcs1_mbox 12>;
> > + qcom,remote-pid = <1>;
> > +
> > + label = "hexagon";
> > + };
> > + };
> > +
> > + pronto: wcnss@a204000 {
> > + compatible = "qcom,pronto-v2-pil", "qcom,pronto";
> > + reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
> > + reg-names = "ccu", "dxe", "pmu";
> > +
> > + memory-region = <&wcnss_mem>;
> > +
> > + interrupts-extended = <&intc 0 149 IRQ_TYPE_EDGE_RISING>,
> > + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> > + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> > + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> > + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> > + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
> > +
> > + power-domains = <&rpmpd MSM8939_VDDCX>,
> > + <&rpmpd MSM8939_VDDMX_AO>;
> > + power-domain-names = "cx", "mx";
> > + vddpx-supply = <&pm8916_l7>;
> > +
> > + qcom,state = <&wcnss_smp2p_out 0>;
> > + qcom,state-names = "stop";
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&wcnss_pin_a>;
> > +
> > + status = "disabled";
> > +
> > + iris {
> > + compatible = "qcom,wcn3660";
> > +
> > + clocks = <&rpmcc RPM_SMD_RF_CLK2>;
> > + clock-names = "xo";
> > +
> > + vddxo-supply = <&pm8916_l7>;
> > + vddrfa-supply = <&pm8916_s3>;
> > + vddpa-supply = <&pm8916_l9>;
> > + vdddig-supply = <&pm8916_l5>;
> > + };
> > +
> > + smd-edge {
> > + interrupts = <0 142 1>;
> > +
> > + qcom,ipc = <&apcs1 8 17>;
> > + qcom,smd-edge = <6>;
> > + qcom,remote-pid = <4>;
> > +
> > + label = "pronto";
> > +
> > + wcnss {
> > + compatible = "qcom,wcnss";
> > + qcom,smd-channels = "WCNSS_CTRL";
> > +
> > + qcom,mmio = <&pronto>;
> > +
> > + bt {
> > + compatible = "qcom,wcnss-bt";
> > + };
> > +
> > + wifi {
> > + compatible = "qcom,wcnss-wlan";
> > +
> > + interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>,
> > + <0 146 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "tx", "rx";
> > +
> > + qcom,smem-states = <&apps_smsm 10>,
> > + <&apps_smsm 9>;
> > + qcom,smem-state-names = "tx-enable",
> > + "tx-rings-empty";
> > + };
> > + };
> > + };
> > + };
> > +
> > + venus: video-codec@1d00000 {
> > + compatible = "qcom,msm8916-venus";
> > + reg = <0x01d00000 0xff000>;
> > + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> > + power-domains = <&gcc VENUS_GDSC>;
> > + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
> > + <&gcc GCC_VENUS0_AHB_CLK>,
> > + <&gcc GCC_VENUS0_AXI_CLK>;
> > + clock-names = "core", "iface", "bus";
> > + iommus = <&apps_iommu 5>;
> > + memory-region = <&venus_mem>;
> > + status = "okay";
> > +
> > + video-decoder {
> > + compatible = "venus-decoder";
> > + };
> > +
> > + video-encoder {
> > + compatible = "venus-encoder";
> > + };
> > + };
> > +
> > + bimc: interconnect@400000 {
> > + compatible = "qcom,msm8939-bimc";
> > + #interconnect-cells = <1>;
> > + reg = <0x400000 0x62000>;
> > + clock-names = "bus", "bus_a";
> > + clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> > + <&rpmcc RPM_SMD_BIMC_A_CLK>;
> > + status = "okay";
> > + };
> > +
> > + pcnoc: interconnect@500000 {
> > + compatible = "qcom,msm8939-pcnoc";
> > + #interconnect-cells = <1>;
> > + reg = <0x500000 0x11000>;
> > + clock-names = "bus", "bus_a";
> > + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
> > + <&rpmcc RPM_SMD_PCNOC_A_CLK>;
> > + status = "okay";
> > + };
> > +
> > + snoc: interconnect@580000 {
> > + compatible = "qcom,msm8939-snoc";
> > + #interconnect-cells = <1>;
> > + reg = <0x580000 0x14080>;
> > + clock-names = "bus", "bus_a";
> > + clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> > + <&rpmcc RPM_SMD_SNOC_A_CLK>;
> > + status = "okay";
> > +
> > + snoc_mm: interconnect-snoc-mm {
> > + compatible = "qcom,msm8939-snoc-mm";
> > + #interconnect-cells = <1>;
> > + clock-names = "bus", "bus_a";
> > + clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
> > + <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
> > + status = "okay";
> > + };
> > +
> > + };
> > + };
> > +
> > + smd {
> > + compatible = "qcom,smd";
> > +
> > + rpm {
> > + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> > + qcom,ipc = <&apcs1 8 0>;
> > + qcom,smd-edge = <15>;
> > +
> > + rpm_requests: rpm_requests {
>
> No underscores.
>
> > + compatible = "qcom,rpm-msm8936";
> > + qcom,smd-channels = "rpm_requests";
> > +
> > + rpmcc: qcom,rpmcc {
> > + compatible = "qcom,rpmcc-msm8936";
> > + #clock-cells = <1>;
> > + };
> > +
> > + rpmpd: power-controller {
> > + compatible = "qcom,msm8939-rpmpd";
> > + #power-domain-cells = <1>;
> > + operating-points-v2 = <&rpmpd_opp_table>;
> > +
> > + rpmpd_opp_table: opp-table {
> > + compatible = "operating-points-v2";
> > +
> > + rpmpd_opp_ret: opp1 {
> > + opp-level = <1>;
> > + };
> > +
> > + rpmpd_opp_svs_krait: opp2 {
> > + opp-level = <2>;
> > + };
> > +
> > + rpmpd_opp_svs_soc: opp3 {
> > + opp-level = <3>;
> > + };
> > +
> > + rpmpd_opp_nom: opp4 {
> > + opp-level = <4>;
> > + };
> > +
> > + rpmpd_opp_turbo: opp5 {
> > + opp-level = <5>;
> > + };
> > +
> > + rpmpd_opp_super_turbo: opp6 {
> > + opp-level = <6>;
> > + };
> > + };
> > + };
> > + };
> > + };
> > + };
> > +
> > + hexagon-smp2p {
> > + compatible = "qcom,smp2p";
> > + qcom,smem = <435>, <428>;
> > +
> > + interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
> > +
> > + mboxes = <&apcs1_mbox 14>;
> > +
> > + qcom,local-pid = <0>;
> > + qcom,remote-pid = <1>;
> > +
> > + hexagon_smp2p_out: master-kernel {
> > + qcom,entry-name = "master-kernel";
> > +
> > + #qcom,smem-state-cells = <1>;
> > + };
> > +
> > + hexagon_smp2p_in: slave-kernel {
> > + qcom,entry-name = "slave-kernel";
> > +
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + };
> > + };
> > +
> > + wcnss-smp2p {
> > + compatible = "qcom,smp2p";
> > + qcom,smem = <451>, <431>;
> > +
> > + interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
>
> Isn't this some GIC interrupt? If so, then use flags for PPI and SPI
> interrupts.
>
>
> Best regards,
> Krzysztof
