On Thu 14 Apr 16:31 CDT 2022, Bhupesh Sharma wrote:
> Add support for SDC2 which can be used to interface uSD card.
>
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
Thanks for the patch Bhupesh. I have already applied v1 though. Can you
please double check linux-next to confirm that things are in order?
Thanks,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 45 ++++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 15f3bf2e7ea0..0fecebf0a473 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -3270,6 +3270,51 @@ usb_2_ssphy: phy@88eb200 {
> };
> };
>
> + sdhc_2: sdhci@8804000 {
> + compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0 0x08804000 0 0x1000>;
> +
> + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> + <&gcc GCC_SDCC2_APPS_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface", "core", "xo";
> + iommus = <&apps_smmu 0x6a0 0x0>;
> + qcom,dll-config = <0x0007642c>;
> + qcom,ddr-config = <0x80040868>;
> + power-domains = <&rpmhpd 0>;
> + operating-points-v2 = <&sdhc2_opp_table>;
> +
> + status = "disabled";
> +
> + sdhc2_opp_table: sdhc2-opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-19200000 {
> + opp-hz = /bits/ 64 <19200000>;
> + required-opps = <&rpmhpd_opp_min_svs>;
> + };
> +
> + opp-50000000 {
> + opp-hz = /bits/ 64 <50000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-202000000 {
> + opp-hz = /bits/ 64 <202000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> + };
> +
> dc_noc: interconnect@9160000 {
> compatible = "qcom,sm8150-dc-noc";
> reg = <0 0x09160000 0 0x3200>;
> --
> 2.35.1
>
