On Mon, 11 Aug 2014, Bjorn Andersson wrote:
> Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
> and 8064 based devices. The driver exposes resources that child drivers
> can operate on; to implementing regulator, clock and bus frequency
> drivers.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
> ---
> drivers/mfd/Kconfig | 15 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/qcom_rpm.c | 596 +++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/qcom_rpm.h | 12 +
> 4 files changed, 624 insertions(+)
> create mode 100644 drivers/mfd/qcom_rpm.c
> create mode 100644 include/linux/mfd/qcom_rpm.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 6cc4b6a..7a8584a 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -524,6 +524,21 @@ config MFD_PM8921_CORE
> Say M here if you want to include support for PM8921 chip as a module.
> This will build a module called "pm8921-core".
>
> +config MFD_QCOM_RPM
> + tristate "Qualcomm Resource Power Manager (RPM)"
> + depends on ARCH_QCOM && OF
> + select MFD_SYSCON
> + help
> + If you say yes to this option, support will be included for the
> + Resource Power Manager system found in the Qualcomm 8660, 8960 and
> + 8064 based devices.
> +
> + This is required to access many regulators, clocks and bus
> + frequencies controlled by the RPM on these devices.
> +
> + Say M here if you want to include support for the Qualcomm RPM as a
> + module. This will build a module called "qcom_rpm".
> +
> config MFD_RDC321X
> tristate "RDC R-321x southbridge"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 8afedba..fce4a7d 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -153,6 +153,7 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
> obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
> obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
> obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o
> +obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o
> obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
> obj-$(CONFIG_MFD_TPS65090) += tps65090.o
> obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> new file mode 100644
> index 0000000..7cc0513
> --- /dev/null
> +++ b/drivers/mfd/qcom_rpm.c
> @@ -0,0 +1,596 @@
> +/*
> + * Copyright (c) 2014, Sony Mobile Communications AB.
> + * Copyright (c) 2013, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
[...]
> +static const struct qcom_rpm_data msm8660_template = {
> + .version = -1,
-1?
> + .resource_table = msm8660_rpm_resource_table,
> + .n_resources = ARRAY_SIZE(msm8660_rpm_resource_table),
> +};
[...]
> +struct qcom_rpm *dev_get_qcom_rpm(struct device *dev)
> +{
> + return dev_get_drvdata(dev);
> +}
> +EXPORT_SYMBOL(dev_get_qcom_rpm);
No need for this at all. Use dev_get_drvdata() direct instead.
[...]
> +static int qcom_rpm_probe(struct platform_device *pdev)
> +{
> + const struct of_device_id *match;
> + struct device_node *syscon_np;
> + struct resource *res;
> + struct qcom_rpm *rpm;
> + u32 fw_version[3];
> + int irq_wakeup;
> + int irq_ack;
> + int irq_err;
> + int ret;
> +
> + rpm = devm_kzalloc(&pdev->dev, sizeof(*rpm), GFP_KERNEL);
> + if (!rpm) {
> + dev_err(&pdev->dev, "Can't allocate qcom_rpm\n");
No need for error messages on OOM.
> + return -ENOMEM;
> + }
'\n' here.
> + rpm->dev = &pdev->dev;
> + mutex_init(&rpm->lock);
> + init_completion(&rpm->ack);
> +
> + irq_ack = platform_get_irq_byname(pdev, "ack");
> + if (irq_ack < 0) {
> + dev_err(&pdev->dev, "required ack interrupt missing\n");
> + return irq_ack;
> + }
> +
> + irq_err = platform_get_irq_byname(pdev, "err");
> + if (irq_err < 0) {
> + dev_err(&pdev->dev, "required err interrupt missing\n");
> + return irq_err;
> + }
> +
> + irq_wakeup = platform_get_irq_byname(pdev, "wakeup");
> + if (irq_wakeup < 0) {
> + dev_err(&pdev->dev, "required wakeup interrupt missing\n");
> + return irq_wakeup;
> + }
> +
> + match = of_match_device(qcom_rpm_of_match, &pdev->dev);
> + rpm->data = match->data;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + rpm->status_regs = devm_ioremap_resource(&pdev->dev, res);
> + rpm->ctrl_regs = rpm->status_regs + 0x400;
> + rpm->req_regs = rpm->status_regs + 0x600;
> + if (IS_ERR(rpm->status_regs))
> + return PTR_ERR(rpm->status_regs);
You should probably do this _before_ using it above.
> + syscon_np = of_parse_phandle(pdev->dev.of_node, "qcom,ipc", 0);
> + if (!syscon_np) {
> + dev_err(&pdev->dev, "no qcom,ipc node\n");
> + return -ENODEV;
> + }
> +
> + rpm->ipc_regmap = syscon_node_to_regmap(syscon_np);
> + if (IS_ERR(rpm->ipc_regmap))
> + return PTR_ERR(rpm->ipc_regmap);
> +
> + ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 1,
> + &rpm->ipc_offset);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "no offset in qcom,ipc\n");
> + return -EINVAL;
> + }
> +
> + ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 2,
> + &rpm->ipc_bit);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "no bit in qcom,ipc\n");
> + return -EINVAL;
> + }
> +
> + dev_set_drvdata(&pdev->dev, rpm);
> +
> + fw_version[0] = readl(RPM_STATUS_REG(rpm, 0));
> + fw_version[1] = readl(RPM_STATUS_REG(rpm, 1));
> + fw_version[2] = readl(RPM_STATUS_REG(rpm, 2));
> + if (fw_version[0] != rpm->data->version) {
> + dev_err(&pdev->dev,
> + "RPM version %u.%u.%u incompatible with driver version %u",
> + fw_version[0],
> + fw_version[1],
> + fw_version[2],
> + rpm->data->version);
> + return -EFAULT;
> + }
> +
> + dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
> + fw_version[1],
> + fw_version[2]);
> +
> + writel(fw_version[0], RPM_CTRL_REG(rpm, 0));
> + writel(fw_version[1], RPM_CTRL_REG(rpm, 1));
> + writel(fw_version[2], RPM_CTRL_REG(rpm, 2));
A comment documenting what this is doing would be helpful here.
> + ret = devm_request_irq(&pdev->dev,
> + irq_ack,
> + qcom_rpm_ack_interrupt,
> + IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND,
> + "qcom_rpm_ack",
> + rpm);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to request ack interrupt\n");
> + return ret;
> + }
> +
> + ret = irq_set_irq_wake(irq_ack, 1);
> + if (ret)
> + dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
> +
> + ret = devm_request_irq(&pdev->dev,
> + irq_err,
> + qcom_rpm_err_interrupt,
> + IRQF_TRIGGER_RISING,
> + "qcom_rpm_err",
> + rpm);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to request err interrupt\n");
> + return ret;
> + }
> +
> + ret = devm_request_irq(&pdev->dev,
> + irq_wakeup,
> + qcom_rpm_wakeup_interrupt,
> + IRQF_TRIGGER_RISING,
> + "qcom_rpm_wakeup",
> + rpm);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to request wakeup interrupt\n");
> + return ret;
> + }
> +
> + ret = irq_set_irq_wake(irq_wakeup, 1);
> + if (ret)
> + dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
> +
> + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
> +}
> +
> +static int qcom_rpm_remove_child(struct device *dev, void *unused)
> +{
> + platform_device_unregister(to_platform_device(dev));
> + return 0;
> +}
> +
> +static int qcom_rpm_remove(struct platform_device *pdev)
> +{
> + device_for_each_child(&pdev->dev, NULL, qcom_rpm_remove_child);
of_platform_depopulate()?
> + return 0;
> +}
> +
> +static struct platform_driver qcom_rpm_driver = {
> + .probe = qcom_rpm_probe,
> + .remove = qcom_rpm_remove,
> + .driver = {
> + .name = "qcom_rpm",
> + .owner = THIS_MODULE,
Remove this line, it's taken care of for you.
> + .of_match_table = qcom_rpm_of_match,
> + },
> +};
> +
> +static int __init qcom_rpm_init(void)
> +{
> + return platform_driver_register(&qcom_rpm_driver);
> +}
> +arch_initcall(qcom_rpm_init);
> +
> +static void __exit qcom_rpm_exit(void)
> +{
> + platform_driver_unregister(&qcom_rpm_driver);
> +}
> +module_exit(qcom_rpm_exit)
> +
> +MODULE_DESCRIPTION("Qualcomm Resource Power Manager driver");
> +MODULE_LICENSE("GPL v2");
No one authored this driver?
> diff --git a/include/linux/mfd/qcom_rpm.h b/include/linux/mfd/qcom_rpm.h
> new file mode 100644
> index 0000000..a52bc37
> --- /dev/null
> +++ b/include/linux/mfd/qcom_rpm.h
> @@ -0,0 +1,12 @@
> +#ifndef __QCOM_RPM_H__
> +#define __QCOM_RPM_H__
> +
> +#include <linux/types.h>
> +
> +struct device;
> +struct qcom_rpm;
> +
> +struct qcom_rpm *dev_get_qcom_rpm(struct device *dev);
> +int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count);
> +
> +#endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
