>
> On Aug 14, 2014, at 9:22 AM, Yaniv Gardi <ygardi@xxxxxxxxxxxxxx> wrote:
>
>> The files in this change implement the UFS HW (controller & PHY)
>> specific
>> behavior in Qualcomm MSM chips.
>>
>> Signed-off-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>
>> ---
>> Documentation/devicetree/bindings/ufs/ufs-msm.txt | 37 +
>> .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 4 +
>> drivers/scsi/ufs/Kconfig | 12 +
>> drivers/scsi/ufs/Makefile | 4 +
>> drivers/scsi/ufs/ufs-msm-phy-qmp-20nm.c | 254 +++++
>> drivers/scsi/ufs/ufs-msm-phy-qmp-20nm.h | 216 ++++
>> drivers/scsi/ufs/ufs-msm-phy-qmp-28nm.c | 368 +++++++
>> drivers/scsi/ufs/ufs-msm-phy-qmp-28nm.h | 735 +++++++++++++
>> drivers/scsi/ufs/ufs-msm-phy.c | 646 ++++++++++++
>> drivers/scsi/ufs/ufs-msm-phy.h | 193 ++++
>
> Any reason not to put the phy driver in drivers/phy ?
Yes. Phy driver introduces a generic phy framework.
And as a framework it provides with API's, callbacks,
And data structures.
I think the right place to have the >implementation< of the ufs-msm-phy code
Is under drivers/scsi/ufs as it's more related to ufs than it's related to
the framework itself.
>
>> drivers/scsi/ufs/ufs-msm.c | 1105
>> ++++++++++++++++++++
>> drivers/scsi/ufs/ufs-msm.h | 158 +++
>> 12 files changed, 3732 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/ufs/ufs-msm.txt
>> create mode 100644 drivers/scsi/ufs/ufs-msm-phy-qmp-20nm.c
>> create mode 100644 drivers/scsi/ufs/ufs-msm-phy-qmp-20nm.h
>> create mode 100644 drivers/scsi/ufs/ufs-msm-phy-qmp-28nm.c
>> create mode 100644 drivers/scsi/ufs/ufs-msm-phy-qmp-28nm.h
>> create mode 100644 drivers/scsi/ufs/ufs-msm-phy.c
>> create mode 100644 drivers/scsi/ufs/ufs-msm-phy.h
>> create mode 100644 drivers/scsi/ufs/ufs-msm.c
>> create mode 100644 drivers/scsi/ufs/ufs-msm.h
>
> Seems like we should spit this into two patches, one for the phy and one
> for the UFS driver itself. Maybe even three, one for the 20nm phy, one
> for the 28nm phy, and one for ufs-msm.c,h.
we could try to split it, but since we didn't split this change into
functional sub-changes, we decided to upload this change as a whole,
as one change without the other wouldn't work anyhow, and they are both
needed for proper functionality.
>
>>
>> diff --git a/Documentation/devicetree/bindings/ufs/ufs-msm.txt
>> b/Documentation/devicetree/bindings/ufs/ufs-msm.txt
>> new file mode 100644
>> index 0000000..b5caace
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/ufs/ufs-msm.txt
>
> This should probably be bindings/phy/qcom-ufs-phy.txt
>
>> @@ -0,0 +1,37 @@
>> +* MSM Universal Flash Storage (UFS) PHY
>> +
>> +UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro.
>> +Each UFS PHY node should have its own node.
>> +
>> +To bind UFS PHY with UFS host controller, the controller node should
>> +contain a phandle reference to UFS PHY node.
>> +
>> +Required properties:
>> +- compatible : compatible list, contains
>> "qcom,ufs-msm-phy-qmp-28nm"
>> + or "qcom,ufs-msm-phy-qmp-20nm" according to the
>> relevant
>> + phy in use
>
> Do we really need ?-msm? in the compat name?
>
>> +- reg : <registers mapping>
>> +- #phy-cells : This property shall be set to 0
>> +- vdda-phy-supply : phandle to main PHY supply for analog domain
>> +- vdda-pll-supply : phandle to PHY PLL and Power-Gen block power
>> supply
>> +
>> +Optional properties:
>> +- vdda-phy-max-microamp : specifies max. load that can be drawn from
>> phy supply
>> +- vdda-pll-max-microamp : specifies max. load that can be drawn from
>> pll supply
>> +
>> +Example:
>> +
>> + ufsphy1: ufsphy@0xfc597000 {
>> + compatible = "qcom,ufs-msm-phy-qmp-28nm";
>> + reg = <0xfc597000 0x800>;
>> + #phy-cells = <0>;
>> + vdda-phy-supply = <&pma8084_l4>;
>> + vdda-pll-supply = <&pma8084_l12>;
>> + vdda-phy-max-microamp = <50000>;
>> + vdda-pll-max-microamp = <1000>;
>> + };
>> +
>> + ufshc@0xfc598000 {
>> + ...
>> + phys = <&ufsphy1>;
>> + };
>> diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>> b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>> index e73a619..378585c 100644
>> --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>> +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>> @@ -9,6 +9,9 @@ Required properties:
>> - reg : <registers mapping>
>>
>> Optional properties:
>> +- phys : phandle to UFS PHY node
>> +- phy-names : the string "ufs_msm_phy" when is found in a node, along
>> + with "phys" attribute, provides phandle to UFS PHY node
>
> seems like the phy-names should be more generic like ?ufsphy"
>
>> - vcc-supply : phandle to VCC supply regulator node
>> - vccq-supply : phandle to VCCQ supply regulator node
>> - vccq2-supply : phandle to VCCQ2 supply regulator node
>> @@ -39,6 +42,7 @@ Example:
>> reg = <0xfc598000 0x800>;
>> interrupts = <0 28 0>;
>>
>> + ufs-phy = <&ufsphy>;
>> vcc-supply = <&xxx_reg1>;
>> vcc-supply-1p8;
>> vccq-supply = <&xxx_reg2>;
>
>
>> diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
>> index 6e07b2a..a8259e0 100644
>> --- a/drivers/scsi/ufs/Kconfig
>> +++ b/drivers/scsi/ufs/Kconfig
>> @@ -70,3 +70,15 @@ config SCSI_UFSHCD_PLATFORM
>> If you have a controller with this interface, say Y or M here.
>>
>> If unsure, say N.
>> +
>> +config SCSI_UFS_MSM
>> + bool "MSM specific hooks to UFS controller platform driver"
>> + depends on SCSI_UFSHCD_PLATFORM && ARCH_MSM
>
> This should probably be ARCH_QCOM instead of ARCH_MSM
>
>> + help
>> + This selects the MSM specific additions to UFSHCD platform driver.
>> + UFS host on MSM needs some vendor specific configuration before
>> + accessing the hardware which includes PHY configuration and vendor
>> + specific registers.
>> +
>> + Select this if you have UFS controller on MSM chipset.
>> + If unsure, say N.
>
> [ snip ]
>
> - k
> --
> Employee of Qualcomm Innovation Center, Inc.
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted
> by The Linux Foundation
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
