Currently the qcom,qmp-phy dt-binding doesn't describe
the 'reg' and '#phy-cells' properties for the phy@ subnode.
Fix the same.
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
.../devicetree/bindings/phy/qcom,qmp-phy.yaml | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 411c79dbfa15..c553c8ad0d1a 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -118,6 +118,19 @@ patternProperties:
Each device node of QMP phy is required to have as many child nodes as
the number of lanes the PHY has.
properties:
+ reg:
+ minItems: 1
+ maxItems: 6
+ items:
+ description: |
+ List of offset and length pairs of register sets for PHY blocks.
+ common block control registers, such as - SW_RESET, START_CTRL.
+ pcs registers, such as - PCS_STATUS, POWER_DOWN_CONTROL,
+ pcs misc registers, such as - PCS_MISC_TYPEC_CTRL.
+
+ "#phy-cells":
+ const: 0
+
"#clock-cells":
enum: [ 0, 1, 2 ]
--
2.35.1
