On 4/14/2022 2:53 AM, Matthias Kaehlcke wrote: Thanks for your time Matthias!!!
On Wed, Apr 13, 2022 at 08:51:17PM +0530, Srinivasa Rao Mandadapu wrote:Add dt nodes for sound card support, which is using WCD938x headset playback, capture, I2S speaker playback and DMICs via VA macro. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx> Co-developed-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx> Signed-off-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc7280-crd.dts | 23 ++++++++ arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 93 ++++++++++++++++++++++++++++++++ 2 files changed, 116 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts index b944366..1e16854 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dtsYou need to refresh your tree, this file has been renamed to sc7280-crd-r3.dts. That DT is for the CRD <= 2.x, newer versions use sc7280-herobrine-crd.dts.
Okay. will update accordingly.
@@ -90,6 +90,29 @@ ap_ts_pen_1v8: &i2c13 { us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; };+&sound {+ audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC3", "MIC BIAS3", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +}; + &tlmm { tp_int_odl: tp-int-odl { pins = "gpio7"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index cf62d06..a7c884a 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -84,6 +84,99 @@ pinctrl-names = "default"; pinctrl-0 = <&nvme_pwren>; }; + + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-wcd938x-max98360a-1mic"; + + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + qcom,msm-mbhc-hphl-swh = <1>; + qcom,msm-mbhc-gnd-swh = <1>; + + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + + dai-link@1 { + link-name = "MAX98360A"; + reg = <MI2S_SECONDARY>;Dumb question: is this value actually used? A quick glance through qcom_snd_parse_of() suggests it isn't. And the CPU DAI id is already specified in the 'sound-dai' property below. In a quick test I replaced the corresponding 'reg' values in sc7180-trogdor.dtsi with 'random' values and audio playback on my coachz (sc7180-trogdor-coachz-r3.dts) still works ...
Yes. agree that it's not being used. But i am not sure of general syntax followed.
for now will delete it.
+ cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@5 { + link-name = "DisplayPort"; + reg = <LPASS_DP_RX>;nit: add an empty line (in all links) to separate the properties from the node
Okay.
+ cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@6 { + link-name = "WCD9385 Playback"; + reg = <LPASS_CDC_DMA_RX0>; + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + }; + + dai-link@19 { + link-name = "WCD9385 Capture"; + reg = <LPASS_CDC_DMA_TX3>; + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + }; + + dai-link@25 { + link-name = "DMIC"; + reg = <LPASS_CDC_DMA_VA_TX0>; + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; };&apps_rsc {-- 2.7.4
