Hi Kuldeep, On Mon, 18 Apr 2022 at 02:34, Kuldeep Singh <singh.kuldeep87k@xxxxxxxxx> wrote: > > Qcom BAM DT spec expects generic DMA controller node name as > "dma-controller" to enable validations. This is already fixed with in-flight patch <https://lore.kernel.org/lkml/20220211214941.f55q5yksittut3ep@xxxxxxxxxx/T/#mb84230b9b8e06544859ccf5e16a7651fac79c933> Thanks, Bhupesh > Signed-off-by: Kuldeep Singh <singh.kuldeep87k@xxxxxxxxx> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > --- > v3: Add Krzysztof R-b tag > --- > v2: No change > --- > arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi > index b9a48cfd760f..c4cfab92a44e 100644 > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi > @@ -707,7 +707,7 @@ tsens1: thermal-sensor@4ad000 { > #thermal-sensor-cells = <1>; > }; > > - cryptobam: dma@644000 { > + cryptobam: dma-controller@644000 { > compatible = "qcom,bam-v1.7.0"; > reg = <0x00644000 0x24000>; > interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; > -- > 2.25.1 >
