Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@xxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
v3: Add Krzysztof R-b tag
---
v2: No change
---
arch/arm/boot/dts/qcom-mdm9615.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 4d4f37cebf21..8f0752ce1c7b 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -330,7 +330,7 @@ pmicgpio: gpio@150 {
};
};
- sdcc1bam: dma@12182000{
+ sdcc1bam: dma-controller@12182000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -340,7 +340,7 @@ sdcc1bam: dma@12182000{
qcom,ee = <0>;
};
- sdcc2bam: dma@12142000{
+ sdcc2bam: dma-controller@12142000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12142000 0x8000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
--
2.25.1
